Networking :: WiFi Stop Working / Shows Only One Network And It Doesn't Connect
Feb 2, 2016
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom Model Number F@ST2304 Firmware Version 7.16a4N ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
My laptop pulled down the latest Technology Preview a few days ago and now my Wi-Fi is totally messed up. I cannot even open the network settings from the task bar icon.
Strange issue that just started today. My Ethernet adapter shows unidentified network and none of my apps have internet access, however my web browsers work just fine. I am even making this post from the adapter that supposedly has no access. I have been searching around for a solution, but no problem seems similar to mine. Check out the screenshot below.
I'm troubleshooting a PC that was recently upgraded a few weeks ago from windows 7 to windows 10.Up until today, there were no major issues. However, suddenly the computer stopped connecting to the internet. It's not picking up any wireless signals and even with an network cable plugged in, it doesn't connect to the internet. The network adapter picks up as working when I check everything in the device manager, and when I look up the network printers, I am able to see them. But when I try to setup a new network connection, I get a message saying "no network hardware detected". And when I try to print random documents, I am not detecting the printers.
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
I purchased a new computer running Windows 10 (build 10240) today and have set up the windows. However, it will not allow me to connect to my WiFi. When I use the network option in the task bar, no wifi networks are shown and it says that there are no connections available. When I access the network settings, where the different sections are listed on the left-hand side, WiFi is not an available option.
Updating drivers Deleting drivers and then allowing the computer to reinstall A few different command prompt methods such as resetting the TCP stack, as well as trying some that were for people who upgraded from windows 7/8.
I have a PC out in my building and it runs off wifi, sometimes my modem shuts down and reboots but it will take like 5-10 minutes unless I go all the way back to the house and power cycle it. The problem is my windows 10 is set to auto connect to it but never does unless I click the wifi drop down list then it will reconnect, any application that tries to reconnect to a specific wifi more aggressively than windows 10 it gets annoying because if I need to use the pc I cant just look across the room to see if my modem is back.
Changed my wifi name and password. After that I`m unable to type the password. After clicking connect it loads for a while showing "checking network requirements" and it ends with "cant connect to this network". Password box does not even show up!
The computer is at my dad's so I am relaying what he told me. It is a new Cell laptop, a quad i7 CPU with 10 Home ed.
He has a problem: everything that uses WIFI, that is Explorer, Skype, Firefox has long freezes. The connect is practically intermittent. None of his other devices (another Dell quad i5 laptop, an old Core duo Dell laptop not his Galaxy tablet, or his internet TV) have the problem. It is one network which is from his cable company wifi router.
Brought a new Dell laptop and came with windows 10 and i can't get it to connect to wifi. It worked perfectly at my mums, but at home it says wifi password incorrect when its not. I have updated drivers, disabled and enabled the wireless adapter. In command prompt i type ipconfig/renew it says no operation can be performed.
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond DHCP server did not issue an IP addressStored password incorrect; enter new password: _________ WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
I have an odd issue with my laptop since upgrading to Windows 10. The first time I boot I cannot connect to my home Wifi, however when I reboot I can. It is always the same every time I switch it on in that it will only connect on the second boot.
I recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
My son disconnected the wifi on his laptop. I know it is in Parameters - Reseau et internet (network - internet) - Wifi but the button to activate won't move. Don't know what to do.
Yesterday I relocated our Wireless Modem to a cooler room. We live in the Philippines so these devices can get quite warm...After relocating and hooking up all the wires, cables etc. My wife's computer a Dell, would not connect to the Wireless modem. I checked and replaced all wires with new ones, and rechecked the connections, everything was okay...I use a MAC which is still working fine, and connected right away, so I know the Signal is getting out. I did the "ping" command and it is not going thru. Tried everything I know, cannot get her wireless to work. I have a Red X on her adapter, in the Network Connections dialog box, "Not Connected"...Her system uses a Broadcom 802.11n adapter, which I replaced just recently...When I registered I added all the Dell system info, CPU info etc..
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035 the network path was not found upon clicking troubleshooting the problem says the remote device or resource wont accept the connection..
I've got a problem in stopping sharing some folders across my home network. Not sure if it matters, but I'm on Windows 10 Pro, running my admin user account.
Anyways, I have a folder I want to unshare from my network called Pictures2 which I believe is empty. The problem is I don't seem to have access to it even though it seems to originate from my PC.
While I was able to unshare the 'Videos2' folder by going into the Properties normally, I can't stop sharing 'Pictures2' from my network even though my computer is the one sharing it. Double-clicking gives a "Windows cannot access XXX" error.
I did notice a difference between these folders which may or may not be important - The Pictures2 folder doesn't have an owner (either that or it can't display it in advanced security settings) while the Videos2 owner was SYSTEM.
My user account was in the 'shared' list of both these two folders which is strange, as I couldn't access Pictures2 but could access Videos2.
Honestly I don't know how or when they were even created and I can't find them on my local drive if they're even meant to be there.
I tried using the manual cmd method suggested in another thread but get this:
I would like this Pictures2 folder unshared, and if I know where it's located on my PC I can delete it too.
How to configure my Win10 to automatically connect to multiple wifi networks?
I have wifi at home so when I get to the office I have to configure the "manage wifi settings" on my laptop, click "forget" my home wifi, and manually enter the office wifi password. I repeat the same process when I get home from the office or use the wifi in my brother's house. I had this on my Windows 7 but can't figure out how to in Win10.
After updating from windows 7 to 10 I faced a problem, my laptop's wifi does not auto connect when i turn it on, instead i have to reset my wifi adapter to connect to my wifi, this was not an issue on windows 7. My drivers are all up to date i even tried to reinstall them but still no result. It feels annoying to reset my adapter all the time when i turn on my laptop
