Networking :: Windows Could Not Start WLAN AutoConfig Service On Local Computer
Dec 28, 2015
After recent Windows 10 Update, my wireless connection no longer works. I've done some troubleshooting and I have ruled out my ISP, cable modem, and router, leaving the issue to be something within the computer (Dell laptop - Inspiron 7537).The wired connection works fineWhen I run Windows Network Diagnosis, it tells me that the Windows Wireless Service is not running (see attached pdf report).
When I try to manually start the WLANSVC service, i get an error message that says "Windows could not start the WLAN AutoConfig service on Local Computer Error 193:0xc1" (see attached)When I try to manually start the WLANSVC service from the command prompt (as Admin) I get a slightly different message that says "The WLAN AutoConfig service is starting. The WLAN AutoConfig service could not be started. A system error has occurred. System error 193 has occurred. *** is not a valid Win32 application." (see attached)I've downloaded the latest Intell PROset Wireless drivers from Dell (V18.20.0.9) for the Wireless-N 7260 wireless network adapter and have uninstalled and reinstalled the drivers.
View 3 Replies
Similar Messages:
Jan 25, 2016
After running windows in safe mode to test something my firewall stopped working. I could not find anything related to this issue on Win10. When i try to initialize windows Firewall service i get the message error 1068 and when i try to run it through Control Painel i get another message error with the code 0x8007042c.
There is event log saved on my pc everytime i start windows (ID 7001). I also cannot run SFC /scannow anymore.. this is getting annoying.
View 2 Replies
Nov 10, 2015
I have so far avoided using Windows ID login (except on a sacrificial VM I use for Windows Insider(*)) as I can no longer access the SMB shares that I have set up.
Is there any way for the two to co-exist? I can't get my head round using SMB shares and NTFS permissions with Windows Live ID - is it possible in any way at all, or have MS (as usual) given us a "new spiffy improved thing" which is actually none of the above?
Why can't I use a local login AND have have access to the Insider programme?
View 3 Replies
Sep 23, 2015
My printers have stopped working and I get the message that Windows can't open Add Printer. The local print spooler service is not running. Please restart the spooler or restart the machine. I've restarted the machine several times with no solution. How can I restart the print spooler?
View 2 Replies
Sep 7, 2015
Here is my PC configuration :
Recently I am getting notification that my memory is low, close some application to free the memory. But I wasn't running any high memory consuming programs. Then I looked into my Task manager and got this :
I am really not sure why this is taking so much memory. This Service Host: Local System continuously taking more and more memory and it moves total memory upto 80% ....
This didn't happen before I am recently facing this problem. How I can stop this so that it doesn't take this unusual memory. I checked windows update but no update is pending.
View 1 Replies
Nov 15, 2015
Earlier today I tried to rebuild the windows search index, only to find out that I currently have no locations indexed. I also cannot modify to add any new locations. Windows search troubleshooter shows the following results:
I went to services and tried to start the windows search service, only to be given an error message about the path specified not existing. This doesn't make any sense because I can literally see the windows search executable:
View 1 Replies
Nov 11, 2015
From the moment I switch ON my desktop until switching OFF (working for 12 hours) the local system service host is always between 30% to 40% regarding CPU usage.Why? How to stop it?
This does not happen in my Microsoft Surface Pro machine. Both machines, desktop and Surface have the same software installed so it's hard to believe this CPU usage is software based.
View 5 Replies
Sep 26, 2015
Ever since I've upgraded to Windows 10 there is an error message after startup that says: "Access violation at address 0046D0AD in module 'Wlakn Mgr.exe'. Read of address 00000002." I think it has to do with my internet connection-My pc (yes, pc, not laptop) came with an extra strong internet receiver becuase I have to do with wifi; no cable available here.
View 1 Replies
Nov 24, 2015
I have internet service from AT&T which worked great until I updated to windows 10. My pc now connects to the wifi just find, I can download updates, but I can not browse a web page. When I go into open a web page I get an error that the page can not be displayed. If I vpn to my work it works just fine then. I have reset the browser settings, created a new account on my pc and nothing has worked.
View 6 Replies
Sep 2, 2015
Sometimes the workstation service doesn't start. Without this service, the local network does not find other computers, printers, and network storage.
View 2 Replies
Jan 27, 2016
From a PC (called PC1 later on; running W10), I do not see other PCs or multimedia boxes connected on my local network.
Using 192.xx.yy.zz doesn't work.
From a W10 tablet PC (called PCt later on), I see other connected devices: Dune HD and PC1. From PCt I can even navigate into PC1 directories.
In PC1 Network and Sharing Center, I cannot enable file sharing.
When clicking on the button to activate it and then saving the changes, I notice, when reopening the parameters window, that it hasn't been changed. It remains disabled.
The "computer browser" Service will not start because of dependencies (1068 error).
The "workstation" Service will not start because of dependencies (1068 error). This service is required to "computer browser"
View 2 Replies
Dec 29, 2015
Windows 10 always does a disk check when I start my computer
View 1 Replies
Dec 7, 2015
I thought I fixed this problem, until dec. 2nd when Windows 10 did an update.
All my drivers are up to date.
I removed my Anti Virus (Panda) and re-installed it, looked like it fixed it, but the next day it stopped recognizing my wifi connection again.
View 4 Replies
Aug 10, 2015
We drag the Local area connection and place it in the riht upper corner of the displayWe connect via Realtek PCIe GBE Family Controller.We then right click on the icon when we want to connect to the Internet - we ENABLE.When we want to disconect - We rightclick on the Icon and DISABLE
It has worked in all our windows up to Win 7 included.But now in Win 10 that we have upgaded to (free) it does not work.If we want to disable we only see the alternative ENABLE.WE ALSO INTEND TO INSTALL WIN 19 ON OUR SECOND COMPUTER. I THINK I SKALL THIS TIME MAKE A CLEAN INSTALL.IS IT OK TO START WITH THAT AS SOON AS I GET THE WHITE FLAG AT THE BOTTOM OF THE DISPLAY.I HAVE PICKED UP AN ISO FILE AND LOADED IT DIRECT TO AN USB-MEMORY.
View 3 Replies
Aug 28, 2015
It has been doing this EVERY time I restart or start up my computer. It is very annoying as it clears some of my apps. It also says it is putting me on a temporary account or something like that.
View 1 Replies
Oct 9, 2015
I accidentally upgraded from 7 to 10 on my desktop computer, and now I no longer have a start button, nor the ability to find any recognizable function like control panel, to enable me to uninstall.
View 1 Replies
Nov 4, 2015
Is there, anyway, to, possibly save web mail from Outlook.com to my computer??
I see no options anywhere to Save As in Outlook.com
View 5 Replies
Feb 13, 2016
Windows 7 function toggle command for Enable/Disable (available on left click) now only has Disable. Is there any way this can be turned back on?
View 4 Replies
Oct 9, 2015
Every time I try to join a wifi network, my computer crash within a few seconds. It says "system service exception" igdkmd64.sys in the bsod. So I just cant connect to the internet anymore.. im on my phone right now.
Windows 10 from win7
Intel core i7-3610qm
Intel centrino wireless-n 2230
View 6 Replies
Jul 31, 2015
I recently upgrade to windows 10 and so far everything is great except. My Windows update wont download the updates it only gives me error 0x80246008. So I tried to solve it on my own by using these steps.
I suggest you to try to manually reset the Windows Updates Components and check.
Please follow the below steps to reset the Windows Updates Components:
1.Press Windows Key + X on the keyboard and then select “Command Prompt (Admin)” from the menu.
2.Stop the BITS, Cryptographic, MSI Installer and the Windows Update Services. To do this, type the following commands at a command prompt. Press the “ENTER” key after you type each command.
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
3. Now rename the SoftwareDistribution and Catroot2 folder. You can do this by typing the following commands in the Command Prompt. Press the “ENTER” key after you type each command.
ren C:WindowsSoftwareDistribution SoftwareDistribution.old
ren C:WindowsSystem32catroot2 Catroot2.old
4. Now, let’s restart the BITS, Cryptographic, MSI Installer and the Windows Update Services. Type the following commands in the Command Prompt for this. Press the ENTER key after you type each command.
net start wuauserv
net start cryptSvc
net start bits
net start msiserver
5. Type Exit in the Command Prompt to close it.
View 1 Replies
Aug 29, 2015
I just discovered that none of my computers have the Volume Shadow Copy service running and none have the startup set to automatic. I have always assumed that this service should start at boot time. I have started the service on all the computers and set the startup to automatic. Shouldn't that have been the state set by the installer? The manner of installation doesn't seem to be a factor because some of the computers were upgraded via GWX and some were upgraded and then clean installed afterward. I have reported this via the Feedback app.
View 2 Replies
Mar 5, 2016
have tried a number of commands and started all of my services.
View 9 Replies
Nov 5, 2015
I bought a new PC a few weeks ago with Window 10. Worked fine for a while and now when I switch on and type my password I get a message in the bottom right hand corner of the screen stating "Failed to connect to a Windows Service"
I googled this problem and the advice given was to run the command prompt as an administrator and type netsh>winsock reset
However, when I right click on the command prompt icon and click run as an administrator nothing happens. A few minutes later an error message pops up on the screen stating "The service did not respond to the start or control request in a timely fashion"
If I left, click on the command prompt icon the command window opens immediately.
View 2 Replies
Feb 23, 2016
When I turned on my Windows 10 Desktop PC this morning, it said it failed to connect to a Group Policy Service or something similar to that.
This is my Desktop PC. It's a Acer Aspire XC603G Desktop.
View 2 Replies
Aug 1, 2015
So I've gotten fed up enough with the terrible windows search system.
I went into services.msc and disabled the windows search service; then restarted my computer.
However, "Cortana" is still listed in my task manager taking up 50mb of memory.
How do I kill Cortana?
View 9 Replies
Apr 14, 2016
I have an issue where someone has gained server access / control over my system. I am unable to regain control or even clean install my operating system from OEM windows 10 CD. Currently, when i attempt to re-install what I end up with is a Windows Deployment Service installation. Is there a way to force the installation from CD?
View 6 Replies
