Networking :: Wireless Connection Randomly Drops
Dec 17, 2015
So i currently have a MSI GT80 Titan running killer wireless 1525 network adapter and am constantly seeing network drops to the point where i get an exclamation mark over my wireless icon and no activity. Connection shows connected but no speed, only until i manually disconnect and reconnect. This has been happening since earlier this week after having the laptop off for a couple days and i'm sure some updates came in from Microsoft.
Steps I've taken already to resolve this:
1. Uninstalled killer wireless software suite and installed stand alone killer driver
2. Refreshed the PC with clean windows 10 install
3. All drivers are up to date including BIOS
4. Ran ccleaner along with registry side of it
5. Memtest shows no errors
6. Hard drives show no errors
7. Connected to LAN and no drops all day
I'm not sure what else to check as this is a fairly new laptop bought back in march and doing some searching on google showed some posts about people with the same issues (different laptops/hardware) thinking it was related to Windows 10.
View 1 Replies
Similar Messages:
Nov 15, 2015
I did a clean install of Windows 10 Pro x64 on my HP Pavilion dv6t-7000 laptop and now my Wi-Fi drops on me about every 10 minutes then it takes about 1-2 minutes to reconnect. I previously had Windows 8.1 Pro x64 and had no issues on this laptop and I just upgraded a few days ago.
I've installed the correct drivers too. Windows does report something when I attempt a troubleshoot .
EDIT 1:So far I ran a troubleshooting and my internet has been solid for about 4 minutes now since. It solved some gateway error?..
The problem is still there and I have NO wifi yet without it disconnecting.
Specs:
OS Name Microsoft Windows 10 Pro
Version 10.0.10586 Build 10586
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name COSMIC
System Manufacturer Hewlett-Packard
System Model HP Pavilion dv6 Notebook PC
System Type x64-based PC
[code]....
View 9 Replies
Jul 30, 2015
I upgraded to Win10 yesterday. upgrade could be a keyword for the future but since I upgraded everything has been perfect except my connection to the Internet. It's fine on startup but once I go on Edge, Chrome, steam or Skype it stops about 3 minutes in when using them. It doesn't come back unless I restart.
I'm using a Ethernet connect. All wireless devices are working fine, My LAN adapter is a Broadcom Netlink Gigabyte Ethernet. Turning router off and on again doesn't work. All drivers are up to date, apparently. No vpn.
I removed my McAfee to see if that changed anything but still no luck.
I don't know what to do now because this goes beyond my knowledge of windows 10 and computers.
My PC is over 5 years old, maybe that's a factor but it still surpassed all the requirements to run Windows 10
This brings me back to Upgrading and not full fresh install. I've too many family photos and other valuable projects. I dont have an external hard drive either, which I need soon as my current one is getting louder, but that's not the issue here. I just want to get on the Internet and enjoy my 120mb Internet speed!
View 9 Replies
Nov 25, 2015
I recently changed my wifi Mac Id using Technetium as my original ID got blocked. I had to reinstall the drivers and restart the PC to get the Network card working. But that it is fine, the Wifi connection disconnects every 5 minutes or so. I have a Broadcomm 802.11n adapter Driver version: 7.35.290 dated 6/07/2015.
View 3 Replies
Oct 6, 2015
I recently brought a new wireless network adapter for usb (Asus usb N14) and since I've started using it the connection is really unstable, I'm on the same connection on my iphone and it's just fine but on my pc it's really struggling, I've ran speed tests and it'll work fine when randomly it'll just go down, I'll still be connected to the router but have no internet. Right now looking at the wifi graph in task manager it literally going straight up for a few seconds then straight back to 0 when downloading a file, and I'm unable to download any large files because it'll just fail after about 30 seconds.
I've updated it to the latest version with no change in performance or reliability. One other thing I'm at Uni so other people will be using the connection and I've no access to the router unfortunately.
View 1 Replies
Aug 11, 2015
On installing Win !0 there was no wireless function, but win 10 initialised the card however when the laptop sleeps the card drops out and it has to be reset every time the card is Intel(R) Pro/Wireless 3945ABG. If the laptop is kept awake there is no problem
View 5 Replies
Feb 23, 2016
When I used to use XP I could see a little yellow warning when it drops out. Now with win10 all it shows is a little white wifi connection symbol and it says it's connected to the network.
How can I have a monitor to see if my internet is connected in win10 NOT JUST THE WIFI NETWORK!
I solve one problem and another pops up to slow me down for half a day looking for solutions. I don't have a reliable connection any more, it keeps dropping out. I need to know these things because if I'm half way through a forum message or email then when I press send I lose the lot and have to type it all over again after refreshing the browser. I just need to know when it drops out so I can copy everything I've typed into the clipboard before I hit send.
View 4 Replies
Mar 13, 2016
I was update my windows, after that i turn off then turn on my laptop and then my wireless connection couldn't on even i tried to restart and try to click on, it cant be on, how to fix this things? I really need to connect to internet
View 3 Replies
Aug 31, 2015
Once I changed to Windows 10 I lost my wireless connection. My computer won't let me turn it on and it gives me the error: 651 response. Nothing seems to work.
View 1 Replies
Jan 7, 2016
I installed W10. This problem appears to be random and happens a couple of time a month. It is really annoying. What happens is, the WiFi appears to stop working. It can't find any available networks and won't reconnect no matter what I do. I have even tried closing/restarting explorer but that does nothing.
If I try to shut-down or restart my computer, it just hangs on the shut-down/restart screen. I have to hold down the power button to get my computer to shut-down. The weird thing is, after a restart, it works fine ...for a few weeks. It just seems very strange.
I use a WiFi dongle. I have a couple of them so I tried each one - they all eventually give me the same result . I have a HP if that works.
View 3 Replies
Feb 26, 2016
While using Windows 7 I often disabled my wireless connection by using the f12 function key. It was disabled when I upgraded to Windows 10 via my ethernet connection. The f12 key now only controls airplane mode. I cannot enable my wireless adapter. I have an HP Pavillion dv7 notebook computer. HP says they offer no Windows 10 compatible upgrades for this model. Is there a solution other than restoring Windows 7?
View 6 Replies
Mar 20, 2016
I have a Intel AC 7260 WAN card in my laptop which is running Windows 10 x64. After about 10-15 minutes I will lose internet connection while still being connected to the SSID.
I installed the latest Intel AC 7260 drivers from here. Also I ran a complete scan with Malwarebytes which didn't find any threats. This issue started a few days ago.
Anyway of seeing if a application is causing this connection lose issue? It is only happening with this one device.
View 2 Replies
Jan 11, 2016
I have a Packard Bell Easynote TK37 that has recently been "upgraded" to windows 10 and ever since keeps randomly losing internet connection. This is happening nearly every time I use the pc, it loses connection for 30seconds or so then reconnects.
The network adapter is Broadcom 802.11N
Connected to a Virgin superhub.
I have Avast internet security installed.
View 7 Replies
Aug 1, 2015
We use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
View 8 Replies
Oct 11, 2015
Yooooo! I have a Lenovo Y510p with modified BIOS so I could replace the crappy Intel wireless card that came with it (Intel Centrino N2230) for an Azurewave - Broadcom 4352. The experience has been good so far, the only problem I'm having is the low wireless signal with the card. I have other laptops that have higher range and strengths on the same place with older cards.
I've tried verifying (and even swapping) the cables and noted no difference. I asked on another forum and they told me that it could be that the card is not receiving enough power, but I have yet to find a settings in the BIOS or in Windows that dwindles its performance. I have recently updated the driver from Lenovo's website and it didn't improve a bit. How to improve the wireless signal?
View 9 Replies
Dec 9, 2015
I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
View 4 Replies
Feb 10, 2016
I have just bought an HP laptop running windows 10. I cannot connect to internet wirelessly as when I select my network connection it requests username and password. (Screen shot attached)I only have a network password for my connection and have never had or been requested for a username.
We have a couple of laptops at home and they connect with password only no problem. It is only this laptop that requests both. I can find no way past it and cannot connect. It connects via cable fine but thats obviously not ideal for portable laptop.
View 9 Replies
Sep 16, 2015
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
View 7 Replies
Aug 20, 2015
When I first installed Win 10 it was working great got my wifi connection working and everything now it seems I cannot get connected. I have tried several times, putting it mildly. I put in the Modem/router address and password and then I go to the site that shows you the wifi connections and mine is not there. But there are about 10 or 12 that are there. I have tried this several times like I said. And I have rebooted to see if that did anything and it made no diff.
It seems from some of the reading I have done this might be a problem caused by an update. It worked great for several days. And while I am thinking of it can you delete all those other wi fi addresses some how.
View 19 Replies
Oct 29, 2015
I was unable to connect to an older (backup) AP in Win10, but Win7 and my phone, tablet etc could connect no problem - these were connecting using WPA-TKIP, but MS now only allows WPA2-AES
So MS have removed the less secure WPA-TKIP protocol from W10 (this apparently started in W8), but they have left the even less secure WEP protocol in place!!!
I have now connected using WEP - on my router you can use a passphrase to create the hex pairs for the key, but you need to enter the actual hex characters as the key (eg 13 hex digit pairs = 26 characters to enter)
Looking at the wlan profile from the command line interface shows what the settings are...
netsh wlan>show profile plusnet2
Profile PlusNet2 on interface Wireless Network Connection 4:
====================================
Applied: All User Profile
Profile information
-------------------
Version : 1
Type : Wireless LAN
Name : PlusNet2
Control options :
Connection mode : Connect automatically
[Code]......
View 6 Replies
Oct 19, 2015
I have been connecting my PC to my router via a Ethernet cable and have had no issues but I want to move the PC to another room and run it off a wireless adapter. I tried a TP-Link USB adapter but it didn't work so I switched it for a Netgear one. That doesn't work either which makes me think there is something not right with my PC. I have installed and uninstalled multiple times, tired different USB ports but the Wireless Adapter doesn't seem to get an IP address and there are no Wireless settings in the control panel.But there are no Wireless setting and no connectivity to the Adapter.
View 3 Replies
Dec 8, 2015
my laptop recently did automatic updates and I have been having problems with the WiFi. When I first turn it on every thing is fine, but after about 30 minuets or if I shut the lid and it goes to sleep the WiFi just does not work anymore. I have to go to my network adapter and run the trouble shooter which finds the Windows Wireless Serves is not running on this computer. It starts it and every thing is fine for another 30 minutes or until I shut the lid again. I have looked in services.msc and WLAN AutoConfig is running and set to automatic. I have tried uninstalling and reinstalling the driver for my wireless card.
View 1 Replies
Aug 24, 2015
Most of the time we need to boot in safe mode with Networking to fix some of the issues. In some of the windows 10 computers wireless not working in safe mode with Networking
For an example my dell 5547. Has a wireless card, Intel Ac-3160 works fine in normal mode, But in safe mode it refuses to detect any Network, I am seeing similar behavior in some other models too in windows 10
Wired Networking (ethernet) is working.
View 9 Replies
Nov 30, 2015
When I power up my laptop it connects to a network, that I don't have (xfinitywifi). I have deleted the profile, to no avail, I get to my network by cycling my wireless. Its really annoying.
View 2 Replies
Jan 15, 2016
I have two wireless networks at home, and one is faster than the other. This is because the slower one is wired to my desktop, and the modem and router are the same box. So I would like to remove the slower from machines wireless connected. I searched the forum, and got a solution, the command below, but the answer, as can be read, is that the filter does not exist in the system. I am attaching a screen that shows GVT-15DF at the list of connections.
C:Userslarau>netsh wlan delete filter permission=allow ssid="GVT-15DF" networktype=infrastructure O filtro nao existe no sistema.
View 5 Replies
Dec 16, 2015
I just bought an ASUS PCE-N53 PCI-E adapter for my PC that I built several months ago. Previously, I was just using ethernet. Put the card in my PCI-E 1 slot, and installed the drivers from the installation disc, but nothing shows up in Device Manager and I have no wireless option in my Network Connections settings. why it's not showing up, minus it being dead out of the box? I can't try it in my PCI-E 2 slot because my graphics card is in the way.
View 4 Replies