Networking :: Automatically Disconnects From VPN Server
Oct 24, 2015
I am connecting to the VPN server with Windows 10 built-in provider using L2TP/IPsec protocol withusername/password and a Pre Shared Key. Everything is fine except the fact that every 1.5 hours it disconnects automatically. Then I have to go to VPN settings again and press the Connect button to connect to the VPN server.
My friend doesn't experience this problem while connecting to this VPN server from his MacBook. This is a very big issue, that can compromise the privacy of a user.
View 4 Replies
Similar Messages:
Nov 17, 2015
I recently built a new PC and installed windows 10 as my operating system (some what regretting it at this moment) and i have installed a game called Archeage that worked just fine on windows 7 with no connection issues what so ever. Now with windows 10 as i try to select a server i get disconnected right away with maybe a 1/100 chance of actually connecting to the server.
Is there something i have to configure with windows 10 to allow me to connect to game servers because i find i have a similar issue with Black Ops 3 in terms of connecting to the server.
View 3 Replies
Sep 15, 2015
This issue happened after I upgraded to Windows 10 from Windows 7 on my HP computer. We also have another older Dell computer, on which this issue did not occur after upgrading to Windows 10 from Windows 7. I followed advise from an IT technician provided about this issue with Windows 8.1 including editing the registry (Internet Settings and Default Connection Settings) and have no trouble accessing the internet. However, typically after every day or every other day (at most after three days) turning my computer on after being off overnight, the internet connection settings revert back from automatically detect settings to proxy server.
I do not use a proxy server and cannot access the internet when this occurs. This keeps happening even though I go back and reedit the register. What can be done to permanently fix this problem? I am currently using Internet Explorer 11 instead of Edge until Microsoft comes out with their update in early November that allows extensions. I use Norton 360 and cannot use this program with Edge until extensions are allowed, because of security on the internet.
Since this does not happen with the Dell computer, I checked the settings mentioned by the IT Technician and found that the following Internet Settings were not present in the registry: ProxyHttp.1 (or ProxyHttp1_1) and ProxyServer. Will it harm my HP computer if I delete these two from the registry so that the Internet Settings will be the same as those on the Dell computer, which as pointed out above does not have this problem? Also, for ProxyServer the IT technician indicated that there should be no value for this in the registry.
View 4 Replies
Sep 24, 2015
I recently upgraded to windows 10 from windows 7 and have been encountering problems since then.When I try to access any website using my mobile's hotspot all the browsers except firefox show the same message that is "Can’t connect to the proxy server".
So I went into proxy setting and saw that whole area was grayed out and at the top was a message saying "Some setting are managed by your organisation ". The first option in proxy settings is "Automatically detect setting" and it was turned on but because it was grayed out, I couldn't change it.Then I typed internet options in the search bar and clicked on it and a dialogue box appeared and in it I click connections tab and right at the bottom was a message saying "Some settings are managed by your system administrator.
I went into LAN settings and there too everything was grayed out and the automatically detect settings box was checked here too.This problem is not confined only to browsers but my in my Steam account I cannot update my games and also when I try to access news from the steam client it gives and error code.I did a bit of research about that code and found that it was related to proxy.Even my windows update is not working. Every time I try to update it it just stucks at 0% for hours.
View 1 Replies
Jan 25, 2016
This just started happening only a few days ago, I'm not sure what might have caused it, but my laptop will suddenly disconnect from my wifi network. sometimes it won't disconnect, but just stop receiving/sending packets. I can tell this because suddenly my pages are stuck loading and skype is trying to reconnect, but nothing happens until I manually disconnect.
I have tried Troubleshooting. But I usually get "Your proxy setting could not be recognized" or something, even though I don't have any proxy settings.Uninstalling and then reinstalling the latest driver for my wifi card. Disabling power saving for the wifi card as talked about here. Everything mentioned on the Microsoft page here
Ethernet works fine. I can connect my phone to wifi and tether it to my laptop, so this shouldn't be a problem with the router.
View 1 Replies
Nov 11, 2015
In my bar we have free Wi-Fi, I use it myself on my laptop (windows 10.1)
Quite often the Wi-Fi disconnects but nobody sees the router anymore. So everybody loses their connection. It's like my laptop can shut down the router for a while. After a minute or 2 it's visible again.
I also noticed that when I download something large (via torrent) it disconnects allot more.
View 3 Replies
Dec 19, 2015
Since installing the recent updates for Windows 10, every now and then my Wifi will just disconnect... Turning it back on is as simple as clicking on the Internet icon and clicking "connect" again, though I'm a gamer and when the connection drops out during games it becomes a real problem. My Wifi is set to connect automatically, but that tool seems to be ignored as it disconnects and stays disconnected until I manually click "connect".
View 4 Replies
Feb 23, 2016
My laptop is randomly disconnecting from my new router. Sometimes it's every few minutes, sometimes it can be an hour or two in between disconnections. This only seems to effect wireless devices and I notice it most often on my laptop. The router is a Fritz!Box 7490 and is connected to 2degrees Internet. The message in the WLAN event log is :
Wireless LAN device deregistered itself (5 GHz). MAC address: 64:BC:0C:6A:79:62 The weird thing is that if I disconnect from wifi and reconnect it re-establishes the connection near instantly. Sometimes it just shows as connected to wifi but not to the internet.
I have tried factory resetting the router and I've tried setting my laptop DNS settings to 8.8.8.8 and 8.8.4.4. I have also tried to change the wifi channels in case of interference.
View 3 Replies
Mar 5, 2016
At my college we login to our accounts at the school using our email address and passwords. The domain suffix on the email points to which server we are logging into. So typing "*@domainhere.com" will login to the server paired with "domainhere.com". Windows 10 prompts you at login to provide this email and password. When you login, there are 2 drives mounted, one local and one which is on the server so you can login on any computer and have your files accessible, somewhat like a VPN or FTP storage server.
I run a small team of look developers and have a series of render an storage servers. I am interested in setting something like this up but my knowledge of systems management is limited to what I need as a look developer. This is a system often implemented into pipeline systems and version control systems in look development.
View 2 Replies
Dec 22, 2015
When I'm accessing my media library on the computer with my phone it does show all movies/songs in the same folder. I have chosen to share different folders like, E:movies E:kids E:adults C:user*videos. all those folders are shown as only one folder on the device i'm accessing my library with. Sub-folders within the paths does show.
In Windows 7 the folders did not batch up as only one folder, each path was shown separately.
View 1 Replies
Nov 19, 2015
I've been having issues lately with the "Use a proxy server" setting. Initially whenever I would set the slider to "off" and close settings, it wouldn't save. I found that the issue had to do with the UAC being enabled. After I disabled UAC, the setting could be preserved temporarily, i.e., it would revert to "on" after restarting. It's causing serious network slowdowns and I'm at my wits end with Windows.
View 1 Replies
Dec 13, 2015
I need to share a window on my Windows 10 PC via VNC (to an Android device). UltraVNC says it can share a single window, but I can't get their VNC server to do this, only the entire Desktop.
VNC servers that can share a single window?
View 3 Replies
Jan 9, 2016
How to setup my office's wired network with one main server through which all the traffic goes while filtering everything I have blocked?
Also, I have a 5 port hub, can I work with it or do I need a bigger switch?
I only have 5 PCs in my office.
View 6 Replies
Feb 23, 2016
I am dated on things HTPC/Home-Entertainment and need a puzzle piece: What is the right way to pull content off the web [say PBS documentaries from their site] and make available to all the HDTV's connected by ethernet and COAX to household fabric? Presumably the same network & server setup would stream stored movies, home vid, etc to any of the HDTV's.
View 7 Replies
Jan 5, 2016
I upgraded my PC from Windows 7 Ultimate (64-bit) to the Windows 10 'replacement', which is Win10 Professional (64-bit). All went extremely well, no problems, the Windows 'upgrade' retained my settings, all 'mapped' network drives were there, everything was totally great. I easily accessed, created and and saved new documents to folder locations on the server with no 'hesitation' whatsoever.
HOWEVER... SUDDENLY, within the past eight to ten days, where I once had virtually 'immediate' access to shared folders on our aging Windows Server 2003, I now seem to be required to 'wait' for upwards of 8-10 seconds before folders on the server are 'accessible'. For instance: I'm setting up this year's 'fiscal year' folders for my business invoices on the server. As I attempted to create these folders, I had to 'wait' to be able to 'see' and then be able to access the 'Invoices' folder on the shared drive. Then (as I always have done) I 'right-click' within this folder to create the new folder for FY2016 and once again, it takes 8-10 seconds to be able to create this folder, but eventually this is successful. Then I created 'sub-folders' within this folder (IE: "QTR 1") with no delays..
But then in creating a sub-folder within this sub-folder (IE: 01-JAN), there's the same 8-10 second delay. Continuing on with the creation of folders through the full year, SOME are created immediately - OTHERS suffer from this same 'delay'. It is almost as if my PC must 're-negotiate' with the server - determining 'rights' (?) - I dunno, but it truly frustrates me.... I know full well that I MUST replace this old server OS, since Server 2003 is 'dead', but - well, I simply haven't taken the time. Time is money - and I don't have enough... so you know what gets 'first efforts'.
But since I have been operating like this since BEFORE Windows XP was even released (albeit, yes, on a Windows NT Server, back then) with nothing even resembling this 'hesitation' ... Why now, after this 'mandated' upgrade to Windows 10, is this 'hesitation' appearing in simply accessing what was once practically "immediate'..? The whole network is all CAT-5 'gigabit' Ethernet: both of the switches are gigabit, server connection is gigabit, my PC is gigabit, cripes even the NAS is gigabit (yet another 'storage location' on the network...) and where the NAS was 'slower' earlier, it is now 'faster' to access and store on the NAS instead of the Windows Server.
View 5 Replies
Feb 10, 2016
Starting with the Redstone insider previews, my HP mediasmart home server works for automatic backups, and I can open the server console to manage the server. But it is impossible to map a folder on the WHS to a drive.; none of the shared folders on the WHS are visible, and the homes server is not visible under network. Troubleshooting indicates a missing protocol, but has no solution. Everything works fine on the no-preview PCs on the network. I am concerned that MS is abandoning the WHS and am worried about future official updates.
View 5 Replies
Feb 10, 2016
I have a Windows 10 server with an incoming VPN connection created. Right now it specifies a range of IP addresses for the client to use. The alternative is to set it to have your DHCP assign the client's IP address instead. This is what I would like to do, but when I set the connection to ask like this, clients can't connect. On iOS and OS X they both say that they both cannot establish a connection to the VPN server.
My purpose for doing this is to allow all the clients to still browse the internet while connected to the VPN, which normally they cannot do (even when setting to send all traffic). I have to specify the DNS (my router's IP) on each computer, and on iOS this isn't working/possible.
View 3 Replies
Nov 29, 2015
Just a quick question as i can't seem to find an answer on the web. I'm on latest November build for W10 Pro and Bluetooth is automatically on with no option to toggle it on or off. I've turned off the Bluetooth services etc but still it won't go off. Bit unsure why it won't go as i have no wireless adapter installed in my PC.
View 7 Replies
Nov 25, 2015
After updating from windows 7 to 10 I faced a problem, my laptop's wifi does not auto connect when i turn it on, instead i have to reset my wifi adapter to connect to my wifi, this was not an issue on windows 7. My drivers are all up to date i even tried to reinstall them but still no result. It feels annoying to reset my adapter all the time when i turn on my laptop
View 2 Replies
Aug 9, 2015
So, firstly I would like to say that I'm sure most of you have at least heard of this issue if you have never directly dealt with it yourself. This did not just start happening after I upgraded to Windows 10; in fact, it followed me from 7 to 8 to 10 now. Although, each time a new Windows is installed, the issue stops happening for a few days. But I'm getting ahead of myself.
The Problem : I can be doing anything. Listening to music, playing a game. Then suddenly, everything will stop and I'll look. Sure enough, I've been disconnected from my internet. Again, this has happened throughout Windows 7-10. All I have to do is manually reconnect, and I'm back. But usually only for a few more minutes. What I have noticed, however, is that it happens more frequently depending on what I'm doing/playing; I just don't know what makes this occur.
What I have tried : I have been trying to solve this problem for years, which obviously means I have scoured the internet, searching for every possible method that has been suggested. Here's what I've attempted:
Reformatting Windows (like I said, it goes away for a few days after a reformat/an upgrade, but it never stays away).Uninstalling my Wireless card and having Windows automatically reinstall it (this seemed to work for 30 minutes.)Playing with my router settings.Changing my Power Save plans.Playing with the Firewall settings.Uninstalling programs that seemed to be part of the problem.Searching for viruses.
Nothing was effective. And if it was at all effective, it was only temporary.
View 2 Replies
Nov 6, 2015
Upgraded from 8.1 to Windows 10 on Lenovo laptop. Now as soon as I connect to an external Bluetooth hardware to play music my wifi disconnects - every single time! All Bluetooth and adapter drivers up to date.
View 11 Replies
Sep 24, 2015
We have upgraded our MDT 2013 to Update 1 build 8298.And we have quite a few issues that we didn't have before.We have some pretty simple task sequences we use to build images, one for each OS. CurrentlyWindows 7x64, Windows 8.1x64 and Windows 10x64. Each os has a separate virtual machine in our VMware environment. We don't capture the image in MDT since our deployment system requires and older WinPE to run (Capasystems.com).I pick the Syspreb task so it does what needs to be done at the end of the build. Shutdown the machine when it's done, pxe boot into capa and then proceed to capture the image.
After the upgrade I boot from the litetouch ISO like we normally do and using a VMxnet3 driver make the connection to the share and this runs smoothly all the way to the sysprep part. When the machine is done syspreping it completely "drops all network connections" and the build "fails".
Tried with different drivers, old and new. Even tried running it on hyper-v but it yields the same results. Every task sequence was built from scratch since the format part was changed.
View 1 Replies
Aug 22, 2015
I upgraded to Windows 10 on my home PC and now every time I connect to this PC from another PC I can use it for a bit and then all of a sudden it disconnects and when I try to log back in it then doesn't connect anymore.
Then when I actually go to this PC again I see that my LAN Ethernet connection is set to "Limited" and I have to restart my PC to get everything back to normal.
Is my Broadcom Ethernet card not compatible with Windows 10?
View 1 Replies
Aug 23, 2015
For some reason out of nowhere my headset will disconnect, and videos stop working . My headset just disconnects, and videos are unable to play. Also, sometimes the shortcut bar will also stop working when this happens. Windows 10 ...
View 1 Replies
Dec 21, 2015
Twice I have downloaded the Windows 10 Upgrade and both times the start-up process disconnects leaving my screen black. On each occasion I reverted to my Windows 8.1 OS.
View 4 Replies
Feb 10, 2016
I connect my USB 3.0 external hard drive to my laptop and it works but after a few minutes of not using it the disk stops spinning and when I to use it again my computer locks up and after 30-60 seconds it disconnects and reconnects some times. Else I have to pull it out. If I use the drive without a to long pause in between it work perfectly fine but as soon as the drive stop spinning and has to spin up that is where it happened. that feature in the power options turn on where the power to usb does not turn off.
I will look to see it I can change the hard drive shutdown time in properties.
View 9 Replies
