it saids is Ethernet unidentified network?
no internet access.
sharing option is off. i try restarting the PC it use to work fine until the update bridging network cable.
i trying to bridge network from eithernet 2 to Ethernet .
i try bridging while either from ethernet was unplug too.
issue of no internet connection after update to 10130? The motherboard is using Realtek Gigabit Ethernet. A check indicated there is driver issue which block connection to my Linksys EA9200 router. There is no issue with the previous build.
View 9 Repliesi got a brand new computer recently that came with windows 10. i had to reinstall it a few times because of issues i thought were related to the installation (plus the first attempt asked me for a key which i didn't have, the second one didn't). i didn't activate right away. i got two BSOD in 24 hours and thought it was my computer but found out online that it's windows 10's fault so i went to update windows. the update i got took so long it almost looked like a whole new installation though it said updating. when i came home i went to activate and got this message windows is not activated as your previous version of windows on this device was not activated prior to upgrade to windows 10 error code 0x803f7001.
i am nearly 100% positive that error wasn't there before the update. how the hell can i have a previous installation when this is an windows 10 oem computer?
After recent update the Edge box is missing when starting windows10. I can still access Edge from frequently used line but I have this hole in the blue boxes that appear.
View 1 RepliesSince a recent update, Twitter app now crashes on startup. I've tried to uninstall and re-install it, with no success.
It's the only app that does that. With today's Twitter update, problem is alas still here.
I see no reason for that. Do you know a way to "clean" install this app. In case uninstalling it doesn't delete all app's related files?
Error shown is Video_TDR_Failure (NVLDDMKM.SYS). I got that BSOD only one time, every other time the VGA just started stuttering gradually, eventually coming into a halt and then a forced reboot.
I'm pretty sure this was caused by one of the update that Microsoft forces me to install because these kind of problems have never happened before, which you can see here [URL] ...
IMO I think it's because of KB3141032. I could be wrong though
And here's the minidump file: [URL] ...
A clean install of the newest driver doesn't work either.
Right now I've just uninstalled the newest Nvidia driver that I installed in a panic and reversed back to 355.98 (cleaned with DDU) but the damned problem still persists.
I am running Windows 10 on a desktop PC. I downloaded the free update many weeks ago and it's been running very smoothly until recently. Yesterday, Windows 10 downloaded and installed a new update, after which my PC began running much slower on start-up, and my speakers no longer worked. I went into the device manager and updated all the drivers, and did the troubleshooting techniques that pretty much every page on the 'net recommends for Windows 10 sound problems, but nothing fixed the problem.
View 5 RepliesSo I had a pretty big update for my Windows recently and since then whenever I restarted my pc it take like 10 on the restart screen and then the screen goes black so I just turn it off from the button because I'm impatient. And same thing happens when I shut it down, the screen goes off but the pc keeps running for lik it seems forever.
View 1 RepliesSince a recent Windows 10 update was automatically installed last week I can't open any exe files.I get the following error "The application was unable to start correctly (0xc00000e5). Click OK to close the application."
View 1 RepliesI have a Windows 10 Home machine that recently went through a windows update and restarted. It now boots past the BIOS and goes through "Windows Updating" to "Windows Diagnosing/Repairing" boot loop. My computer uses an SSD so it is (I believe) impossible to get it to boot into safe mode. Is there a way to boot into safe mode or rollback the update somehow?
View 1 RepliesWe use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
So I recently gave my laptop an update today. It was fine before but...now it boots to a black screen with just a mouse pointer visible. What should i do?
View 1 RepliesI have Windows 10 laptop hooked up to an ethernet connection which has been working well for the past 6 months. On 2/18/16 it stopped working. I traced the problem to the Qualcomm Atheros network Controller/ Killer E2200 Gigabit Ethernet Controller: Internet status > IPv4 Connectivity: No network connection IPv6 Connectivity: No network connection Clicked: diagnose --> System checked & reset, with IPv4 Connectivity and internet access restored.
This resolved the problem until 3/4, following a Windows 10 update. The above solution no longer works. Clicking 'Disable this net work device' and then enabling it again restores IPv4 Connectivity and internet access for a limited time but loading a new site or page is slower than it was prior to the emergence of this problem on 2/18, and then the connection is again lost after maybe 10 to 20 minutes.
Since I downloaded windows 10 I keep getting no internet connection before I log on. I called my internet provider and she had me checking a lot of things before she had me to type Device Manager in my search bar and look under networking to see if anything was off. Both my Ralink RT 3290 802.11 bgn Wifi Adapter and my Realtek PCle GBE Famili Controller had a yellow triangle with an exclamation mark in the middle beside them. She had me to right click on them to disable them, then go back and right click again to enable them. My internet connection came back but it keeps losing connection about once a week. I didn't have this problem before the download. This is a HP Desktop and I am connected wireless.
View 3 RepliesCan't connect to broadband connection... The Modem (or other connecting devices) has reported an error
While I troubleshooted in network and sharing center I got:
There might be a problem with the driver for the Ethernet adapter
And
There might be a problem with the driver for the wi-fi adaptor
I am using Windows 10...
My PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
View 1 RepliesI upgraded my ageing Dell Inspiron 530 desktop PC this morning from Win7 Ultimate to Win10 Pro. The PC is connected to the router via ethernet cable.All seems fine in terms of the OS, but I have no internet access. I know the router's OK as my other devices are fine.When I run the troubleshooter it flags up "There may be a problem with the driver for the Local Area Adapter".Digging further, it seems the issue is "Windows couldn't automatically bind the IP protocol stack to the network adapter"
Looking at Services, I found the Wired AutoConfig and WLAN AutoConfig services weren't running were set to Manual. I changed these to Automatic and rebooted, but still no joy.The network adapter is an Intel 82652V-2 10/100 and Device Manager says it's working normally and the driver is up to date.
I updated to Windows 10 from Windows 8.1
Connection to Internet through Wi-Fi is not happening after that though it is happening via LAN Cable.
Whenever I try to connect through Wi-Fi it gets stuck showing Limited Connectivity and No Internet Access.
I went through some threads and found that it can be solved by disabling "Block Internet Connection Sharing" setting in Bit Defender but I am not using Bit Defender.
I am using Windows Defender instead and am not able to find such setting in that.
disconnect 1-2 min say "login another user"
i have win 10 pro im change remote resvices session time limit and another method but not solved...
So, my wireless router went out on me yesterday during a thunderstorm, which I replaced today. My desktop will not connect to the wireless network at all. I have it connected right now, through my cellphone's hot spot. Also, I can connect my phone to the wireless network as well as a different desktop and get internet access, which suggests something wrong with this desktop, I would imagine.
Network Adapters:
ASUS PCE-N10 11n Wireless LAN PCI-E Card
Broadcom NetLink (TM) Gigabit Ethernet
I'm sure some additional information may be needed but I'm not sure what you would need, so I'll gladly provide what I can if needed.
I've been running Windows 10 on my PC for a few months now. I upgraded from Windows 7 and absolutely love it! However, I am having an issue. When I use my PC on a normal basis, Everything is good. Internet connection is perfectly stable, no problems. But ALWAYS if I restart my pc, and SOMETIMES when I put it to sleep, when my computer turns back on, my internet connection can't be detected. I have to unplug it for about 5-10 seconds and do a full reboot in order for my internet connection to be detected by my pc. None of my other devices have this issue. I have an xbox one, Smart tv, my phone, laptops, etc. connected and none of them have the same issue.
View 9 RepliesAfter spending many anxious days trying to elude a hacker, I Reset my desktop PC yesterday to get a clean Windows 10 install. The legacy network connection I know is routed through the Hacker who is using Teredo tunneling software. I am trying to set up a new and secure VPN network connection to the Internet. But the PC keeps whirring without any visible connection progress. The Network Connection dialog box tells me that Windows 10 is trying to create a WAN Miniport (IKEv2). The legacy connection is on Ethernet with a Realtek PCIe GBE Family Controller, which I imported to the new Windows install.I am worried that I don't have the correct adapter settings and that a new connection can not be created while the legacy one still exists.
View 8 RepliesWhy do I constatnly lose my internet connection since upgrading to Windows 10? Did not have this problem with Windows 7 and Century Link. Once it is gone, cannot get it to reconnect. Keep getting a reset error message each time when running the diagnostics. If I can't resolve this soon, will be going back to Windows 7!!
View 3 RepliesIf remote computer has user password all works well,but if no user password can't log on. In windows 7 this was not a problem,is there a work around so if two windows10 computers have no user passwords you can connect?. This is on a private home network. Don't want to use third party software for this process.
View 2 RepliesI had windows 10, free download, on 25 of August, upgrade from windows 8, and the internet connection was fine till about 10 days ago. Trouble shouting result.."Ethernet does not have a valid IP configuration" . Contacted my provider Talktalk, was sent latest router, can connect with mobile wireless to router, can connect with laptop (Windows 7) hard wired, cannot connect with my desktop (hard wired) on which windows 10 is down loaded.
Have checked cable to desktop by using cable with laptop.
What do I need to do to get connected to the internet with my desktop?
Just upgraded to Windows 10, no internet connection. Had no problems before on 8.1.
No network adapters are recognized (Bluetooth, Ethernet, WLAN). Have Atheros Qualcomm AR9485WB.
Device manager says all is OK, but PC settings say no network adapters detected.
I tried to uninstall/install multiple versions of drivers but nothing works.