Networking :: Can't Connect To Network Drives
Apr 13, 2015
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035
the network path was not found
upon clicking troubleshooting the problem says
the remote device or resource wont accept the connection..
View 9 Replies
Similar Messages:
Jan 12, 2016
Well, not exactly. I have NAS drives and mapped them just like I did on my Windows 7 laptop. It all works fine and the NAS drives show up just fine in network link too. Everything is Ethernet connected. But I see anomalies. If I reboot my machine, or even turn it off and switch it back on fairly soon after then I occasionally get a message about one of the drives being unable to connect. So I then go to 'this pc' and see a Red Cross through one of the drives. If I double click it then it either connects instantly or I will get the green bar filling for about 20-30 secs before it connects. I only have to do it once as after that access is instant every time I go to it. Now this doesn't happen all the time and it never happens if I turn the machine off and start it up after leaving it alone for an extended period. It just seems to be more likely after doing a restart or turning back on within minutes of it last being on.
but I do also notice that when I am in outlook and someone sends me a file (such as jpg pic) that I want to save to my NAS drives. I will click the attachment and select ' save as' and navigate to one of the NAS drives and it will not browse its contents straight away, you can kind of see it trying to open up and eventually after a few seconds it suddenly responds. And again it only occurs once, subsequent navigations all react instantly , for example I go into a second attachment to save down. It's hard to explain but I am inclined to think Windows 10 is just plain buggy . It's not as if the networking is a complete fail. It works but it's just unpredictable. My other Windows 7 machine (which I will never ever let Windows 10 get into it) behaves flawlessly with the NAS drives. They are always live and instantly accessible to it regardless of whether the machine has recently been on or restarted.
View 2 Replies
Jan 3, 2016
We have 2 desktops, 2 convertibles and an hp tablet. We started with total mess network wise - tried most of the fixes and none really worked. I removed homegroup and started over making sure ALL units were in homegroup and still had problems. After many tries of fixes etc. I discovered two of the units were in different workgroups??
We are finally able to see all computers on all the computers but are left with two network drives which show up as media units but never show up and available in the computer area on all computers. Both show up fine on my desktop but never on any of the other units.
Have rebooted, checked settings and what to check now. We have used networking of some sort for years and depend on it - have been without it now for way too long.
View 3 Replies
Aug 17, 2015
I am having problem adding folders from a network drive to the Quick Access.
Firstly I can only drag and drop into the QA in explorer, as right clicking option doesn't work and it only allows one folder at a time to be included. Local folders are not a problem and any number can be included in QA.
Also pinning files to taskbar apps has a similar problem if they are on the network drive.
View 9 Replies
Dec 4, 2015
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
View 2 Replies
Sep 19, 2015
I have some harddrives on a "server" computer in my home-network running win 7. From my "client" running windows 10 I am mounting these drives using
psexec server -u username -p password -d net share F=F: /GRANT:user,Full /GRANT:media,read 2>nul
net use F: serverF
Today my client crashed and I had to remove the graphics card. Since then I cannot enter my network drives anymore, the commands seem to run, but when I try accessing the drives I get a message indicating I should put a media into these drives. Also, I cannot mount them manually using "map network drive" since the drive letters are not available.
I tried removing them from HKEY_LOCAL_MACHINESYSTEMMountedDevices (they are listed there as "DosDevicesF" etc.), but once I restart, they are there (in the registry) again.
how I could fix this? Win10 somehow seems to remember that thes drives once have been there before and keeps blocking the drive letters...
View 1 Replies
Nov 21, 2015
Well I thought I had this problem solved! I had the same exact issue running Windows 7 so I upgraded to 10. It worked for a few times and now each time I restart, the 3 mapped drives I have show the dreaded RED X. This pc worked perfectly prior to me installing a new Samsung SSD after cloning my OS.
I have a Synology NAS connected via Ethernet and have 3 mapped drives to it (each a separate folder, one for music, movies, and pics). All I have to do is double click the mapped drive and it open right away and the Red X disappears until the next reboot.
Any solid solution or a bat file that will fix my issue? I am not saavy when it comes to this type of thing. I need the mapped drives to work upon startup being I use this pc to load XBMC / Kodi for video playback. Kodi is in my startup folder and when the pc boots up, in Kodi I cannot access the files being the mapped drives are not accessible until I click them. Its a PITA...
This pc is in the basement and I rarely go down there so I boot it up via a WOL app and never have to touch a thing on it hence my dilemma!
Is it possible the SSD loads to quickly and the mapped drives are not visible yet?
View 5 Replies
Dec 9, 2015
I started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
View 4 Replies
Feb 10, 2016
I have a Windows 10 Pro 64bit box as my NAS
Storage Spaces, ReFS, 2 drives mirrored
HomeGroup
HDD sleep on idle
Hibernate/Sleep disabled
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
View 1 Replies
Feb 10, 2016
How do I connect to a shared network drive I have setup on my Windows 2012 R2 standard server at home, from my Windows 10 pro laptop is at work?
Do I have to setup a vpn on windows 2012 server and connect to it from my laptop?
View 5 Replies
Oct 12, 2015
I have 2 new PC's set up and running, connected to a NAS via a Switch. Internet is available via a router.
I need to be able to access folders on and from both machines. I have shared C: on both, given permissions on both (everyone = Full control)
I can see the relevant machines in the network section of Windows Explorer (master & backoffice). Sometimes I can see C: on the other machine but I can not connect to it. If I Double click I get "path not found" error ( 80070035 I think )..... masterc
If I type in using the IPaddress it connects and works fine.... 192.168.1.69c
It seems that once I've used the IPaddress method, it can sometimes use the name method ( But this is hit and miss )
View 3 Replies
Nov 7, 2015
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom
Model Number F@ST2304
Firmware Version 7.16a4N
ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
Nov 7 15:09:11 (none) user.alert kernel: Intrusion -> IN=pppoa0 OUT= MAC= SRC=136.159.181.168 DST=2.125.174.9 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=40139 DF PROTO=TCP SPT=45482 DPT=23 WINDOW=5840 RES=0x00 SYN URGP=0 MARK=0x8000000
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
View 6 Replies
Oct 16, 2015
My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
View 5 Replies
Jul 3, 2015
you could connect to an hidden wifi network? or it's just my laptop?
View 9 Replies
Nov 22, 2015
I'm running WiFi on my desktop since a couple of months but tonight(since 2 days ago) I suddenly "can't connect to this network". I live in an apartment building for students and we share a Wi-Fi connection in the house. I've asked my neighbor and her connection works.
My smartphone can connect to the network as usual, my chromecast can connect but not my PC.
I run win 10 and use an ASUS PCE-AC68 network card.
ATM I'm connected to my smartphone hotspot so it seems like there's nothing physically wrong with my equipment.
Smartphone connected to the wifi network
Full signal can't connect!?
Desktop can't connect
I think I've tried all the obvious stuff. Checking for new drivers for my ASUS card, firewall is completely off, telling Win 10 to forget the connection and rebooting, waiting... I just get that annoying message "can't connect to this network" "close"...
Here is a wireless network report(netsh wlan show wlanreport) ....
View 5 Replies
Oct 4, 2015
I recently upgraded one of my laptops from Win7 Pro to Win10 Pro. Ever since then it has been taking a much longer time for the laptop to connect to either of my home networks (two different homes). This is with either WiFi or Ethernet.
When it was running Win7 it would connect to either home's network in a few seconds. Now it usually takes over a minute, as much as two minutes. Once it does connect everything works fine.
View 6 Replies
Feb 2, 2016
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
View 1 Replies
Oct 15, 2015
I have 2 machines connected via a switch. They both have shared folders. They both run a piece of software. One machine acts as a master the other connects to it for data.
The issue is that the "Server" service is randomly stopping on the master and none of the shares work. The software on the second machine is crashing because it can't see the shares on the master. Windows explorer can't see the shares either.
Once this service has been started the software works fine. I have set the service recovery to restart on all failures but this hasn't resolved the issue. Why this stops or how to rectify the problem?
View 4 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Feb 15, 2016
Can see the hot spot but when try to connect comes back with can't connect to this network
View 1 Replies
Feb 4, 2016
Installed Win 10 on network client. I have 8 mapped drives from the server and on a regular basis 1 or more of drive are lost. They come back on their own usually a short time later. This causes major headaches when programs using files on the drives lose the connection while files are in use.
View 1 Replies
Aug 4, 2015
I am using two computers at home one with windows vista 32bit and the other with windows 10 64bit both are home versions. I want to map the drive on my win10 machine to access my saved files and wanna share from my vista one but when I do it I cannot connect to it because it my windows 10 machine doesn't have the same user and pass but that's irrelevant I guess because no matter what use/pass i use it says this drive is mapped to another user/pass even though there is only 2 accounts on the pc that i have access to and have full access to the shared drive.
I have password protection off for the vista machine because it would be stupid to have to use a password to print since my printer is shared just fine and I can print from any pc. Everguid I use is just not detailed enough I have tried using different credentials bt they don't work.
View 1 Replies
Mar 20, 2016
I have a Dell Latitute E5530 laptop that won't connect to my secured home SSID. I have 2 other laptops connected to it wireless, plus phones, plus 2 TV's (via a Roku and a Chromecast). I thought there might be a limit to what I can connect (i.e., 5 devices), however I brought home a 2nd laptop from work and that connected with no issue while the Dell Latitude still cannot. I don't even get the option to type in the Password Key, it simply says "Cannot connect to the network". I'm able to connect to an unsecured network with this same machine, no problem. I've tried reset the network adapter, I'm just stumped at this as to why this computer won't connect.
View 3 Replies
Nov 30, 2015
The time i have installed windows 10 my wifi & audio started creating some problems. Everytime I switch on me laptop i have restart it again to connect it to a LAN or a network & the same thing happens with the audio too, it automatically gets disabled & to enable it i have to troubleshoot the problems to fix it.
View 1 Replies
Aug 15, 2015
Have Z97 GAMING 5 (MS7917) 1.0 MoBo with Intel Core i7 4790K Just clean installed Windows 10 after upgrade from 7 Pro, but had issues with a Samsung SSD 840 EVO 250GB with MBR instead of the prefered one. Had to EUFI instead of BIOS, and apparently, my data drive (ST4000DM0001F2168) was converted and made the system disk to boot from. Anyway, Windows 10 starts and all, but it will not connect to the internet, 'no network drivers are available'. I downloaded the AMI Bios flash v1.b and updated that. Also downloaded MSI LiveUpdate 6 and installed it via USB stick, but nothing shows up on the scans as it cannot connect.
This all started because the stupid "USB Device not recognized" error message kept popping up and Chrome became so slow back in Windows 7. I did everything I read, to include popping out the MoBo battery. The error message still pops up in Windows 10, and Chrome was still slow after the upgrade. Figured a clean install would fix it all...and now I have a very large paperweight...
View 1 Replies
Apr 1, 2015
My laptop pulled down the latest Technology Preview a few days ago and now my Wi-Fi is totally messed up. I cannot even open the network settings from the task bar icon.
View 1 Replies
