Networking :: Can't See Network Printer
Feb 10, 2016
I have a USB connected printer (HP F4100) on my Windows 10 desktop. Everything appear to be working as I have no issue accessing the printer remotely on my Windows 7 laptop. The issue is trying to access from my Windows 10 laptop. I can see the shared workgroup in explorer, but no sign of the shared printer.
How to troubleshoot this? I've gone through the basics such as disabling Windows Firewall, but no luck. Everything looks fine in the advanced sharing settings and as mentioned, things are fine from my Windows 7 machine.
My impression of Windows 10 is not great so far. This along with my machine rebooting due to a security patch even though I had "Notify to schedule restart" selected. The whole mandatory security updates kind of irks me. I kind of get it, but as a power user, I should have the choice. Especially with the amount of sketchy patches that MS has released over the years.
View 3 Replies
Similar Messages:
Dec 20, 2015
Network Printer can't be deleted. It stays in removing status. I checked the registry entries and I do not see the printer.
View 1 Replies
Jan 26, 2016
The issue is I have a network printer selected as the default in Windows 10. I have the option "Let Windows manage my default printer" turned off. At one point randomly, the default printer goes back to the Adobe PDF as the default.
Steps taken:
* I have checked the registry settings to ensure that the options "let Windows manage my default printer" is switched off. I can confirm this.
* Switched the default printer back to the network printer and performed a reboot. The network printer remains as the default. At some point of the day it goes back to Adobe PDF.
View 5 Replies
Mar 9, 2016
Had phone system upgraded recently where I work. Router and phones where installed and right away half the computers where unable to connect to the server and the network printer is completely inaccessible.
All computers have new IP addresses now and only some of them are able to connect toe the server. The IP address for the printer times out when I try to ping it and it is the same for the old IP address of the server. These settings where not changed when phones where installed. The server still lists the old IP address on old Ethernet port but now has a new Ethernet port with new IP address that is being used by the working computers. Disabling this new Ethernet port disables all access to the server.
Trying to map the network drive with some computers does not work and says that the folder is not valid on windows xp or that windows can not access the folder on windows 10. On the working computers I can map the network drive normally with identical commands.
View 2 Replies
Dec 11, 2015
Yesterday I downloaded Windows 10 on my wife's laptop and she immediately lost access to my Brother MFC-8500 printer which she was previously accessing though a wireless network and a router. The Brother is hardwired to the desktop, which was also upgraded to Windows 10, with a USB cord and is listed under printers on the desktop as "Brother MFC-8500 USB." Could you give me the procedure and the syntax for making this printer accessible once again to the laptop? If the syntax requires the desktop's IP address, could you tell me how to find it because the tutorials on the Web still talk about the Control Panel which seems to have been replaced with "Settings."
View 6 Replies
Jan 21, 2016
In Windows XP, when I print a doc from my PDF viewer, I can select my network attached printer's FAX machine and send a fax. In Windows 10, when I print I have a print destination of 'Fax' which puts me into the Windows 10 Fax code which tells me that I don't have a fax machine set up and then we go downhill into total irrelevancy.
View 5 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Oct 16, 2015
I work for a small company, with a network of 25 users. We have recently replaced 4 of the users with new Intel machines.
All of the other machines on the network have retained their ability to print to the network printer after the Windows 10 update, but the four new machines cannot even see it.
I have tried the usual process of adding a printer using the wizard, and also tried locating the printer manually using the printers network address.
The closest I have got is a message telling me that the driver could not be located - i tried connecting the printer directly to a new machine in order to install the driver, before disconncting the printer and trying again through the network. I received the same 'No Driver' message.
It is worth noting that the printers access point to the network is via a Vista machine in the admin department.
View 1 Replies
Sep 28, 2015
I've installed W10, a couple of days back, and things don't go as smoothly as I had hoped. I have a couple of issues and lets start with using printers via the local network.
I have a Windows 10 computer, let's call it PC1, and there's a Windows 7 computer next to mine, say PC2, both connected on the same switch.
In another room there's a Xerox WorkCenter copy machine/printer, connected directly on the lan. Let's call it PRNT1. On PC2 there's a shared HP laserJet 1000 series, let's call it PRNT2.
On PC2, I run "find printer" and it locates PRNT1 and can use it with no problem.
To the PC1 (W10), now: when I run "find printer" it doesn't see any of the two.
View 2 Replies
Oct 11, 2015
I had Windows 7 on the main computer at home. The printer was attached to that computer, with sharing turned on. Other computers in the house, some upgraded to Windows 10 and some not, could all use the printer. Now i have upgraded that desktop to Windows 10, and no one else can print to the printer.
View 3 Replies
Dec 14, 2015
I have a new Windows 10 system (A) which has a printer attached. I'm trying to share the printer with another computer (B) also running windows 10, both computers can see each other on the network but when B tries to look at A it gets a message that it can't access A.The printer is shared and as a far as I can see file and printer sharing is enabled but the add printer routine can't find it.
I can see A and it's shares on a W7 computer (C) on the same network without problem and it has detected and can use the printer.All computers are in the same Workgroup and both W10 machines (A+B) are in the same Homegroup.B was able to use the printer when it was attached to D, unfortunately D is now dead and replaced by A.
View 7 Replies
Jan 11, 2016
PC is a brand new tower running Windows 10 & I love it but I cant seem to get my Mac laptop to connect to the Kodak c310 AIO printer when I hook it up to the new tower. It connects to my old Mac Pro tower easily over the same LAN.
The LAN is an ether-net using a Linksys 4 port router. The Mac identifies the tower as being on the network and seems to try to print to the Kodak but then just hangs at sending the data. As I said above, it prints fine over the same network to my old Mac tower.
I have followed all the steps here: [URL] ....
Enabled LPD protocol & printer sharing in Windows 10.
View 9 Replies
Oct 20, 2015
My office LAN is p-p LAN, every time i want to use the printer connected other PC on LAN, i must enter credentials to connect, how to disable it? Both 2 PCs are Windows 10 Pro, turned off password protected sharing and turned on file and printer sharing.
View 2 Replies
Nov 30, 2015
I upgraded my laptop and desktop to Windows 10. Everything OK after re-setting up Homegroup, including file and printer sharing. However, shared printers on desktop suddenly have become invisible to laptop, although shared files are still visible. I deleted the homegroup and set up a new one - same problem, shared printer invisible from laptop, shared files visible.
View 1 Replies
Sep 16, 2015
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
View 7 Replies
Sep 7, 2015
I cannot add a printer that is connected to a PC with Windows 10 installed. Client OS is Windows XP.
When I try to open "WIN10COMP" and doubleclick on printer name, I get: "Operation could not be completed. Access is denied.".
When I try to add this printer using master, after entering credentials I get: "The credentials supplied are not sufficient to access this printer. Do you want to specify new credentials?".
I can browse a shared by Windows 10 folder, create, edit and delete files in that folder, though.
How can I add that printer?
View 7 Replies
Nov 16, 2015
I have a 2 desktops and a laptop all running Windows 10 Home.
I have a Homegroup that is working and I can see and access the shared folders on each machine.
I can see and connect to the printer on Desktop 2 from the laptop but not Desktop 1's printer. That printer is on and working properly on Desktop 1.
This previously worked fine. I think it stopped working when I updated to the new Windows 10 update yesterday on the laptop and Desktop 1. Desktop 2 has not yet been updated.
I have rebooted both computers and ran the Homegroup Troubleshooter which could not find any problems.
View 1 Replies
Aug 7, 2015
I'm using windows 10 and I'm trying to connect to a printer attached to a remote networked Windows 7 Pro computer. When I go to Settings/Devices/Add printer my printer attached to the remote computer shows up. When I click on the printer I get a window that says "That didn't work". We can't install this printer right now. Try again later or contact your network administrator." How to handle this??
View 9 Replies
Sep 5, 2015
Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 Replies
Nov 29, 2015
I have two Windows 10 Pro x64 machines - say, A and B - connected into a home network. Both machines have two interactive user accounts registered on them: Admin (member of Administrators) and Bob (member of Users). On both machines user names are exactly the same and account passwords are exactly the same.I don't use HomeGroup file sharing, all sharing is set up using accounts and passwords. Everything works fine with folder sharing.
Now I would like to share a printer. The printer is connected to machine A. I enable sharing for that device and give it share name HP. I also go to the printer security settings and enable everything for Administrators and Users.Now I go to machine B. First, I log in as Admin. I go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. At some point I have to enter the name of the printer, so I enter AHP. Without asking for any credentials Windows successfully connects to the remote printer, installs drivers, prints the test page etc. The remote printer appears in Devices and Printers. Everything works as it should.
Then I log out from Admin and log in as Bob on the very same machine B. The first thing that I notice is that for Bob the new printer does not exist in Devices and Printers. This is probably OK, since access to shared network resources depends on per-user credentials.
So, I attempt to "install" this printer for Bob as well. I repeat the same procedure from scratch. this time as Bob: go to Devices and Printers in Control Panel and perform the regular procedure of adding a network printer. Again, at some point I have to enter the name of the printer, so I enter AHP. However, Windows suddenly asks me for credentials to connect to the printer. If I enter Bob's user name and password, Windows refuses connect to the printer, claiming that Bob does not have permission to access it. End of story.
Note that I can work around this problem: I can enter Admin's user name and password when installing the printer for Bob and ask Windows to remember these credentials. Everything will work fine after that, which means that Bob will access that printer as Admin.I don't want to give Bob credentials of Admin to access the network printer. I want Bob to access that printer under Bob's credentials. It works perfectly fine for file sharing. How come it doesn't work for printer sharing?
View 1 Replies
Oct 19, 2015
I got new router today and I can't access my printer wirelessly anymore. I removed my printer from devices and printers and tried a reinstall. It's a cannon Pixma 3150 and Windows 10 Home. The router was faulty so got new 1 off Virgin. But as it's a new password my printer appears offline. So I removed the device and tried reinstallin it with option of install printer wirelessly using USB connection. But as soon as I plug usb in, windows 10 adds the printer itself and then I get the error printer driver is already in use and I can't go any further with the setup.
View 9 Replies
Feb 10, 2016
Auto Updates have 'broken' my HP Network AIO Printer's driver. Repeatedly. On all four networked PCs/Laptops in my household. Requires uninstallation then re-installation of printer driver to regain network printer access/functionality. I and my family are just so impressed </sarcasm>Indeed so impressed that my daughter just bought a MacBook. It behaves perfectly.Seriously considering going over to the dark side as it appears that 'it just works' isn't just a marketing slogan.
View 6 Replies
Oct 13, 2014
I'll first describe my LANs network environment. Three Windows PCs and one Linux PC. Each PC is sharing one folder called TEMP.
The PCs:
WIN10 - Windows 10 TP (non-enterprise edition)
WINXP - Windows XP Pro SP3
WINXP0 - Windows XP Home SP3
CENTOS - CentOS 6.5
Using NetBIOS over TCP/IP on each PCs for name and IP address resolution
No hosts file contains the names of the LANs PCs
The Computer Browser service is active on WIN10
The Computer Browser service is disabled on all the other Windows PCs
Samba services on CENTOS is on but the master browser in the WIN10 PC
Firewalls on all PCs is off except for WIN10 but the rules allow file/printer service through The same primary user account is used to logon to each PC No HomeGroup networking used. All PCs are in the same workgroup=LANSYS
Now with all that stated, I'll describe the problem. From WIN10, I can see the list of PCs in the workgroup and access the shared folder TEMP on each PC
From WINXP, I cannot see the list of PCs in the workgroup and can only access the shared folder TEMP on the other PCs when I use the IP address of those PCs in either My Network Places, Internet Explorer or Windows Explorer. I always receive the "Workgroup not accessible ...." popup window when attempting to view LANSYS from My Network Places.
From WINXP0, it's the same as WINXP
From CENTOS, in order to see shares I use the smbclient command. When I execute the command for WIN10, the command fails and reports that NetBIOS over TCP/IP is disabled on WIN10
But NetBIOS has to working on the LAN because I can ping each PC from any PC. I executed ipconfig/all on each Windows PC and it displays NetBIOS is enabled.
So it appears that NetBIOS Sessions service over port 139 inbound traffic on WIN10 is either buggy, crippled, or broken.
View 19 Replies
Dec 4, 2015
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
View 2 Replies
Mar 5, 2016
I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 Replies
Dec 16, 2015
I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 Replies
