Networking :: Cannot See ANY Machines On Home LAN
Jan 2, 2016
After latest W10 updates W10 computers can't see ANY other machines on my LAN.
2 Linux Machines, one W7, one XP and 2 W10 machines on a LAN.
Linux easily sees ALL computers and can access shared folders.
W7 and XP machines see All machines - Wndows and Linux. XP needs 128 bit encryption altered - no problem here though.
I've got both IVP4 and Ivp6 enabled.
W10 machines ONLY see their OWN individual machine -- nothing else -- not a sauasage.
The W10 machines can access PLEX and Logitech media servers running on Linux / Windows machines but the computers are missing.
Seriously MS Windows networking seems hosed up BIG TIME.
Note all these computers are on WIRELESS connections -- my Wireless speed is pretty good so not a problem for what I need.
C'mon ms - why is Windows Networking always a bit of hit and miss -- I've been using SAMBA on Linux for years and have never found any problem with Networking.
W7 is pretty good too (usually although I've had the odd rogue machine where networking seems to fail even though hardware and software is identical to another machine on network. W10 though while good in other things brings a whole slew of difficulty to networking. I shudder to think of what happens when I install a decent NAS this year.
View 3 Replies
Similar Messages:
Feb 10, 2016
I have two machines running Windows 10 "ermintrude and dougal" and I want my home folder on each to be shared with the other on my home network. dougal can see my home folder on ermintrude, but not the other way round. I have been through all the advanced sharing settings on each machine and compared them, and I have done the same for the sharing settings for each home folder, but I cannot find any difference between them. They are identical. Each is set to share as owner using the same Hotmail address as login and the same password. As I said, I cannot find anything different between the two configurations.
View 3 Replies
Aug 28, 2015
I am trying to connect my Windows 10 laptop to my Windows 10 PC. I have enabled all the sharing setup and both machines are detected but that is as far I can go. Each time I try to join the homegroup (on PC) I am told that no network exists. Both machines are on the same network system and work fine on the internet. I seem to be having laptop problems since Windows 10 was installed although the PC is OK.
View 1 Replies
Nov 7, 2015
I have 5 computers and 4 are running Windows 10. The machine I use as the main one I upgraded from Windows 7 ULT to Win 10 and have had little trouble but, my number 2 machine I added the insider preview 5 builds ago and since then, when trying to view all machines in explorer only the Computers come up yet, on the main machine no problem, all machines that are on the network show up. The pic on the left is the No 2 machine and the one on the right is the No 1 machine. I use assigned IP addresses on all the hardware that show up in No 1.
View 4 Replies
Nov 22, 2015
I have a small network of computers and Homegroup is working a little to well. The network has had to have some changes, machines converting to W10 and changing names. The problem is there does not seem to be a way to refresh the Homegroup list of machines that have joined the Homegroup.
Or is there? do you know a way to display only the machines live on the LAN.?
View 4 Replies
Aug 6, 2015
I upgraded mu Alienware M14 from 7 to 10 using the Media creation tool, and now have no WiFi. Ethernet and Bluetooth both show fine, and a wired connection works perfectly, however, not being able to use WiFi puts a damper on the portability of said laptop.
I've tried the reg delete method, which informs me the key is not found, there was no VPN software installed. I do show a network adaptor under unknown devices, but no matter which driver I choose, it is unable to start. Short of a clean installation, and the loss of personal files and/or hours restoring them or reinstalling.
View 3 Replies
Aug 10, 2015
After upgrading to windows 10 my network comes up as private when it should be "Home". I can't find any way to change it.
View 3 Replies
Mar 5, 2016
My wife doesn't use a password to log on to her Windows 10 PC. Her user name is her email address when the "Enter Network Credentials" window pops up when access is attempted from other computers. Her email password does not work here. We don't know what password it might be expecting. We've run NETPLWIZ on her machine and cleared the "users must enter a user name and password" box. This has no effect.
View 2 Replies
Oct 10, 2015
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
View 6 Replies
Aug 5, 2015
The upgrade from 8.1 went smoothly, the only problem so far is that
I lost my Home Network connection and don't see how to re-connect.
My Home Network consists of 3 computers, an ancient XP, a newer WIN7,
an HP Printer and this one running WIN10.
Where do I find the screen(s) that will let me connect this computer to mt Home Network ?
View 8 Replies
Feb 10, 2016
I have 2 desktops and 1 laptop at home. All 3 are joined in a homegroup, and all network and sharing settings are selected properly. All 3 computers have same windows accounts (passwords), same programs and same internet security.
The 3 computers show up in the network folder and can be accessed from any other computer.However access to the laptop is often denied, by error message 0x80070035 "network path not found"
From the laptop, each desktop is always accessible, no matter who is signed in.
From the desktops, the laptop is often not accessible (error message)
View 2 Replies
Dec 19, 2015
I run a business from home with four computers all running win 10. All was smooth and easy going until a recent round of updates where a couple of computers ended up changed from "home network "to "business network", leaving them unable to communicate with other computers on the network. When I found the problem on the first two computers it was easily solved by just changing them back and rebooting. Now the same problem has happened to all of them, but I'm unable to change it, in that every time I do, when I reboot it comes up saying its on a business network again.
View 5 Replies
Feb 10, 2016
As stated in the subject line I can't connect my Windows 7 Pro system to a Windows 10 Home system via the network without a password being required. Strangely, I can connect from the Windows 7 Pro system to two other Windows 7 Home Premium systems on the same network without a password being required.
Also, all these systems (including the Windows 10 Home system) can connect to the Windows 7 Pro system without any password being required. How I can eliminate the requirement for a password to access the Windows 10 Home system from the Windows 7 Pro system? The Windows 10 Home system version number is 1511, build 10586.0.
View 7 Replies
Nov 16, 2015
I just installed (yesterday) the latest W10 update that installed Version 1511 (OS Build 10586.3) and my home network consisting of five W10 PC's has been "destroyed." I do not use Homegroup. Instead, I have always set up all the drives/folders as shared on all the computers. That worked just fine until now! For some reason only one of the PC's is detected by the other PC's on the network. However, all the drives that I had previously Mapped are OK. Is there some new magic setting that I have to change to get network discovery working again ...or... is MSFT forcing me to use Homegroup?
A little more information to add to my confusion. I was wrong above - two of the PC's are shown in the Network on all the PC's. One of the five PC's, which I use as a home server, runs 24-7. For some reason it has all the other PC's showing under Network and can access all the stuff on all the PC's!! I know it used to take Windows a few minutes to find all the PC's on the Network but... all the other PC's have been running for many hours and nothing changes.
View 9 Replies
Oct 4, 2015
I recently upgraded one of my laptops from Win7 Pro to Win10 Pro. Ever since then it has been taking a much longer time for the laptop to connect to either of my home networks (two different homes). This is with either WiFi or Ethernet.
When it was running Win7 it would connect to either home's network in a few seconds. Now it usually takes over a minute, as much as two minutes. Once it does connect everything works fine.
View 6 Replies
Oct 20, 2015
I've got a LAN in my home/office with 5 machines now running Win 10 and I've not been able to transfer files between them due to "permission problems". These were all running Win 7 and sharing files with no problems but now I'm blocked. I've made every "advanced" change I can think of to networking and sharing screens and to firewall screens. The machines can see each other in File Explorer but "access denied" on transferring anything but vanilla homegroup folders. Need to get some insights on "permissions".
View 7 Replies
Dec 5, 2015
I've just moved house and isp. I am trying to connect my pc to my router via an ethernet switch.
At first my pc would not even connect to a network so deleted and reinstalled the ethernet drivers.
Managed after several attempts to change my network from public to private, but i still have no access to the network.
View 3 Replies
Feb 10, 2016
Starting with the Redstone insider previews, my HP mediasmart home server works for automatic backups, and I can open the server console to manage the server. But it is impossible to map a folder on the WHS to a drive.; none of the shared folders on the WHS are visible, and the homes server is not visible under network. Troubleshooting indicates a missing protocol, but has no solution. Everything works fine on the no-preview PCs on the network. I am concerned that MS is abandoning the WHS and am worried about future official updates.
View 5 Replies
Nov 28, 2015
Here is the setup that I have. I have a wireless network. I have two Toshiba laptops, one running Windows 7 and the other running Windows 10 and I have a printer.
I continually lose connection to the home network although I am still connected to the internet on both laptops. This happens about every 10 or 15 minutes. The only way I've found to re-establish the network connection is to reboot both of the laptops.
I live in a very rural area and only have one option for internet access. It is through the phone company and all they offer is one of those 3G data card things that looks like a little USB data stick. The signal at my house is terrible, in fact, there is only one corner of my house that has a signal and that is where I have my wireless router. It is two rooms away from my computers. But the distance doesn't seem to be a problem for internet connection.
I complained to the phone company about the terrible signal and the woman there suggested that I use my Samsung phone as a router. I took the chip out of the data stick and put it in the phone. And it does work much better than the little Zoom router that I had been using. I do not know anything about the settings in the phone. The lady showed me which buttons to push on the phone to turn the phone on so it can find the signal.
I would prefer to know what I can do to keep it connected but if that fails, then I need to know how to re-connect to the network without rebooting either one or both of the laptops.
View 2 Replies
Dec 28, 2015
I currently have a combined set of links on the favorites bar. How do I get all the machines to sync to the same set of favorites? I've repeatedly tried deleting favorites from one machine or another but they keep coming back.
View 4 Replies
Feb 23, 2016
If I have three computers on local network and only one has internet access will this update all machines on local network?
View 5 Replies
Jul 30, 2015
i've upgraded to Windows 10 (x64) from Windows 8.1.Using HP Probook 4540s..Before, i used Virtual Machine OK ( with Network: LAN, Wifi).But when Windows upgraded 10, i cannot use Network with any options.Check Device Manager - Driver Network OK.
View 1 Replies
Nov 11, 2015
I was wondering if i can connect to my home network from anywhere. More specifically my place of education as i need it for work,Is it possible to connect to my Home Hub?
View 1 Replies
Aug 8, 2015
I successfully upgraded from Windows 8.1 to 10 last week. For the 1st time since the upgrade, I tried emptying my recycle bin. However, it *appears* to fail, in that the dialog box that pops up shows "Discovered 0 items (0 bytes)" indefinitely. More details shows the useless "Time remaining: Calculating" message, and nothing useful. The dialog box has been doing this for 2 hours; nothing has changed. It's neither discovered anything nor progressed. I am able to cancel the dialog box, but when I retry, it goes back to "discovering 0 bytes".
I'm on a pretty powerful Dell Inspiron 15R, 16GB RAM, Intel i7 CPU, 1 TB HDD, that's now running Windows 10 Home, 64-bit.
View 9 Replies
Aug 2, 2015
I have a new Asus desktop running win 8.1 home. I also have a copy of win 8 pro with a legal upgrade key. Is it possible to upgrade the win 8.1 home to win 8 pro and then to win 10 and still be activated. If so, How do I proceed.
View 8 Replies
Sep 13, 2015
A lot of home videos that played well on Windows 7, are not showing up on Windows 10. Some play but are audio only. Seems a common complaint on-line.
View 1 Replies
