Networking :: Connect To Hidden WiFi Network?
Jul 3, 2015you could connect to an hidden wifi network? or it's just my laptop?
View 9 Repliesyou could connect to an hidden wifi network? or it's just my laptop?
View 9 RepliesI have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom
Model Number F@ST2304
Firmware Version 7.16a4N
ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
Nov 7 15:09:11 (none) user.alert kernel: Intrusion -> IN=pppoa0 OUT= MAC= SRC=136.159.181.168 DST=2.125.174.9 LEN=60 TOS=0x00 PREC=0x00 TTL=50 ID=40139 DF PROTO=TCP SPT=45482 DPT=23 WINDOW=5840 RES=0x00 SYN URGP=0 MARK=0x8000000
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
Product Name: Hp Omen 15
Operating System: Microsoft Windows 10 (64-bit)
Wifi card: Intel Wireless-N 7260
since some days my wifi has stopped working.If I click on Wifi icon it shows only ONE (max two) NETWORK:And I live in a building with 20+ networks, as you can see from WiFi Analyzer (I'm the red one on the right).If I deactive/reactive Wifi with fn+f12, it goes to Airplane mode and to Wifi mode again and it eventually shows all the networks/My Wifi is on the top. If it's saved, Windows connects to it and then it drops the connection; if it's not saved and I try to connect, it says "You're not able to connect to this network".The fun fact is that after some seconds every network disappear and only one is showed (probably the neighbour one..I dunno).
I've already tried to HARD-RESET the notebook keeping the power button for 10/15sec with the laptop turned off.I've already tried to follow these instructions [URL] ... updating drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [Windows 10 default], 18.32.0 [Lastest drivers]) with no success. Everytime I install a new drivers, I uninstalled the previous one + Wireless software + reboot.
I tried to uncheked "Allow this computer to turn off this device to save power" on my Wifi hardware settings without success.The HP Network support says I didn't choose a Wifi (Really? The problem is I don't see my Wifi on the list!).This is not related to a new Windows 10 upgrade since I've installed it months ago and It's the first time I've this problem :/ It always worked
I tried different settings too/I changed channel, I set 802.11g on my router, APSD off on the router.I set "Magic packet off, ad hoc QoS off, U-APSD off, fat channel off,incremental throughput off, HT mode off" on the card setting without success. Nothing chaned.The Hardware test doesn't detect any failure. If I go close to the router, it shows my network with full power connection and it connects to it. Then I go back to my bedroom (probably 3/4 meters far), it KEEPS the connection for 30/40min and It drops the connection and I can't reconnect to it anymore. It always worked perfectly in my room in these months (I bought it in March 2015), so the distance is not a problem, I'm 6/7m far from the router.In this case It shows my Network (Connected) and the neighbour network...and the other 20+ networks???
The only way I have is USB tethering with my Nexus 5.I tried the Wifi connection on Elementary Freya (Ubuntu linux based OS) and it shows 20+ networks available on the list. It has not connection problem with my Wifi, but sometimes it stops working, the webpages stop loading and I must reboot Wifi to reconnect to it (usually after 30/40min using it).What's the problem? Is my Wifi card broken?
My laptop pulled down the latest Technology Preview a few days ago and now my Wi-Fi is totally messed up. I cannot even open the network settings from the task bar icon.
View 1 Repliesi have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
View 1 RepliesTitle says it all.
View 5 RepliesI purchased a new computer running Windows 10 (build 10240) today and have set up the windows. However, it will not allow me to connect to my WiFi. When I use the network option in the task bar, no wifi networks are shown and it says that there are no connections available. When I access the network settings, where the different sections are listed on the left-hand side, WiFi is not an available option.
Updating drivers Deleting drivers and then allowing the computer to reinstall A few different command prompt methods such as resetting the TCP stack, as well as trying some that were for people who upgraded from windows 7/8.
I have a PC out in my building and it runs off wifi, sometimes my modem shuts down and reboots but it will take like 5-10 minutes unless I go all the way back to the house and power cycle it. The problem is my windows 10 is set to auto connect to it but never does unless I click the wifi drop down list then it will reconnect, any application that tries to reconnect to a specific wifi more aggressively than windows 10 it gets annoying because if I need to use the pc I cant just look across the room to see if my modem is back.
View 4 RepliesChanged my wifi name and password. After that I`m unable to type the password. After clicking connect it loads for a while showing "checking network requirements" and it ends with "cant connect to this network". Password box does not even show up!
View 2 RepliesThe computer is at my dad's so I am relaying what he told me. It is a new Cell laptop, a quad i7 CPU with 10 Home ed.
He has a problem: everything that uses WIFI, that is Explorer, Skype, Firefox has long freezes. The connect is practically intermittent. None of his other devices (another Dell quad i5 laptop, an old Core duo Dell laptop not his Galaxy tablet, or his internet TV) have the problem. It is one network which is from his cable company wifi router.
I am thinking reinstalling WiFi driver first..
Brought a new Dell laptop and came with windows 10 and i can't get it to connect to wifi. It worked perfectly at my mums, but at home it says wifi password incorrect when its not. I have updated drivers, disabled and enabled the wireless adapter. In command prompt i type ipconfig/renew it says no operation can be performed.
View 11 RepliesToday, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
I have an odd issue with my laptop since upgrading to Windows 10. The first time I boot I cannot connect to my home Wifi, however when I reboot I can. It is always the same every time I switch it on in that it will only connect on the second boot.
View 6 RepliesI recently upgraded to windows 10. i started having a series of problems but they eventually fanned out but I still am unable to connect to the internet via wifi. I have to use the ethernet cable.
View 2 RepliesMy son disconnected the wifi on his laptop. I know it is in Parameters - Reseau et internet (network - internet) - Wifi but the button to activate won't move. Don't know what to do.
View 7 RepliesYesterday I relocated our Wireless Modem to a cooler room. We live in the Philippines so these devices can get quite warm...After relocating and hooking up all the wires, cables etc. My wife's computer a Dell, would not connect to the Wireless modem. I checked and replaced all wires with new ones, and rechecked the connections, everything was okay...I use a MAC which is still working fine, and connected right away, so I know the Signal is getting out. I did the "ping" command and it is not going thru. Tried everything I know, cannot get her wireless to work. I have a Red X on her adapter, in the Network Connections dialog box, "Not Connected"...Her system uses a Broadcom 802.11n adapter, which I replaced just recently...When I registered I added all the Dell system info, CPU info etc..
View 1 RepliesI started my PC in a new premises with a Wireless modem, I have two other PC's connected.
When I started the PC it saw the wireless network and the option came up to connect and there was a tick in the "Connect Automatically" box.
I selected OK but got a message "unable to connect".
I did not get the opportunity to enter the Password/Key.
Now the PC will not connect to the Network nor will and Diagnose and repair fix anything.
BTW the Ethernet adaptor has been disabled.
The laptop I am sending this from is next to the PC so the wireless signal is okay.
I have a Windows 10 Pro 64bit box as my NAS
Storage Spaces, ReFS, 2 drives mirrored
HomeGroup
HDD sleep on idle
Hibernate/Sleep disabled
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035
the network path was not found
upon clicking troubleshooting the problem says
the remote device or resource wont accept the connection..
How to configure my Win10 to automatically connect to multiple wifi networks?
I have wifi at home so when I get to the office I have to configure the "manage wifi settings" on my laptop, click "forget" my home wifi, and manually enter the office wifi password. I repeat the same process when I get home from the office or use the wifi in my brother's house. I had this on my Windows 7 but can't figure out how to in Win10.
After updating from windows 7 to 10 I faced a problem, my laptop's wifi does not auto connect when i turn it on, instead i have to reset my wifi adapter to connect to my wifi, this was not an issue on windows 7. My drivers are all up to date i even tried to reinstall them but still no result. It feels annoying to reset my adapter all the time when i turn on my laptop
View 2 RepliesHow do I connect to a shared network drive I have setup on my Windows 2012 R2 standard server at home, from my Windows 10 pro laptop is at work?
Do I have to setup a vpn on windows 2012 server and connect to it from my laptop?
I have 2 new PC's set up and running, connected to a NAS via a Switch. Internet is available via a router.
I need to be able to access folders on and from both machines. I have shared C: on both, given permissions on both (everyone = Full control)
I can see the relevant machines in the network section of Windows Explorer (master & backoffice). Sometimes I can see C: on the other machine but I can not connect to it. If I Double click I get "path not found" error ( 80070035 I think )..... masterc
If I type in using the IPaddress it connects and works fine.... 192.168.1.69c
It seems that once I've used the IPaddress method, it can sometimes use the name method ( But this is hit and miss )
My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
View 5 RepliesI'm running WiFi on my desktop since a couple of months but tonight(since 2 days ago) I suddenly "can't connect to this network". I live in an apartment building for students and we share a Wi-Fi connection in the house. I've asked my neighbor and her connection works.
My smartphone can connect to the network as usual, my chromecast can connect but not my PC.
I run win 10 and use an ASUS PCE-AC68 network card.
ATM I'm connected to my smartphone hotspot so it seems like there's nothing physically wrong with my equipment.
Smartphone connected to the wifi network
Full signal can't connect!?
Desktop can't connect
I think I've tried all the obvious stuff. Checking for new drivers for my ASUS card, firewall is completely off, telling Win 10 to forget the connection and rebooting, waiting... I just get that annoying message "can't connect to this network" "close"...
Here is a wireless network report(netsh wlan show wlanreport) ....
I recently upgraded one of my laptops from Win7 Pro to Win10 Pro. Ever since then it has been taking a much longer time for the laptop to connect to either of my home networks (two different homes). This is with either WiFi or Ethernet.
When it was running Win7 it would connect to either home's network in a few seconds. Now it usually takes over a minute, as much as two minutes. Once it does connect everything works fine.