Networking :: Error - You Are Not Currently Connected To Any Networks
Jan 10, 2016
I can't change my profile location to private, and I can't make my computer register that it's connected with either my WiFi or my Ethernet. I've looked through the steps posted here, but to no avail. I don't even have the NetworkList key in my registry! I am online with Firefox and Chrome just fine, but Edge won't connect, nor can I connect to the Store. I did a wipe and reinstall a few days ago, partially to try and resolve this issue, and partially to resolve some other issues dating back to the Insider builds, but this problem is still happening. I'm at my wits end, and I can't even connect to my wife's PC to transfer files. I've enabled network discovery and file sharing on public networks, but that didn't even make a difference. Also, since I reinstalled Windows, I've been unable to activate it, but I think that is tied to this network problem. It's like all the new apps and features won't recognize the connection. I'm not running any security software besides Windows Defender, so that shouldn't be an issue.
Is there a way I can change all connected networks to private instead of public with a click-able script? The problem was that a User was connected to an open network using a VPN which then also connected showing Public. With both as Public, they could not map to a network resource. I fixed it using the "go to home-groups and change network settings, etc." But surely there is a way it could be handled with a simple script to edit same? End result was the VPN showed private while the open WiFi he connected to still showed public but he could access the server now.
There are a few networks I cannot connect to and I'm not sure why. Most networks like the one I have at home, I am able to connect, however when I am at my friend's house or some cafe, it doesn't let me connect to the internet. I tried updating my drivers and it still doesn't connect. It was able to connect few months ago when I had windows 8.1 but when I upgraded to windows 10, I started facing these problems.
It doesn't tell me what to problem is either. It just says "Cannot connect to network"
I am connected to a wireless network but the connection is not showing on the Network and Sharing Center active networks. Also, I am unable to change my Network Location from Public to Private as there is no link on the Home-group page. I upgraded from Win 8.1 to Win 10 and already updated wifi drivers.
I can logon without problems to WiFi networks where I provide a passphrase/password to the Wifi-point. This is the case at home and at friends' and family.I can also logon on to public WiFi networks such as on trains, hotels, restaurants and what not. Some of these are like the situation described above, some are hotspot like.Where I run into problems is in corporate network situations. I'll have been provided with a UID and Password (which work, I verified them on my smartphone), see the WiFi signal I am to log on to and what is supposed to happen is:
After I have made the connection to the WiFi spot, my browser is to open automatically and bring me to a URL where I can enter the UID and Password after which I'll be connected. This does not happen. ORI should open my browser and attempt to access any url after which I am guided to a URL where I can enter the UID and Password
I'll see the WiFi point, make the connection, the browser does not open automatically and when I open it myself and try a URL (e.g. CNN.com), instead of requesting a UID and Password I just get the error 'server not found'...
In Windows 7/8 there was a setting, a small checkbox "Treat all future networks as public and don't ask me again".
You can see it in this picture - [URL] .....
In my version of Windows 10, I don't appear to have that option. I could try deleting this registry key ...
HKLMSystemCurrentControlSetControlNetworkNetworkLocationWizard Delete the key: HideWizard
Perhaps there's a simpler way than export, delete key, if wrong result import saved registry file. Have I missed a setting somewhere to set the network location?
How to configure my Win10 to automatically connect to multiple wifi networks?
I have wifi at home so when I get to the office I have to configure the "manage wifi settings" on my laptop, click "forget" my home wifi, and manually enter the office wifi password. I repeat the same process when I get home from the office or use the wifi in my brother's house. I had this on my Windows 7 but can't figure out how to in Win10.
Settings > Network & Internet > Manage Wi-Fi Settings
Here on Microsoft Support page, there's a tutorial on how to "turn off Connect to suggested open hotspots and Connect to networks shared by my contacts"
Configure telemetry and other settings in your organization (Windows)
I used the exact code mentioned there:
REM Disable Wifi Sense REG ADD "HKLMSOFTWAREMicrosoftWcmSvcwifinetworkmanagerconfig" /V "AutoConnectAllowedOEM" /T REG_DWORD /D "0" /F
But the above code only turn off "Connect to suggested open hotspots" and not "Connect to networks shared by my contacts". How can I turn off "Connect to networks shared by my contacts" via registry?
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
I just updated my media center to version 1511 of windows 10. Via wifi, downloaded and installed ok i thought. But have found i cannot see any wireless networks. Normally about 7 up in my area.
I've tried uninstalled the device and installing it again. I've tried checking for newer drivers, but isn't any. I've tried resetting these in command prompt (admin) net sch advfirewall, int ip, int ipv6, winsock and rebooted afterwards. I've tried plugging the usb wifi adapter into a different usb port. I've tried restarting the Router. Mobile phone picks up wifi in the same room.
My office LAN is p-p LAN, every time i want to use the printer connected other PC on LAN, i must enter credentials to connect, how to disable it? Both 2 PCs are Windows 10 Pro, turned off password protected sharing and turned on file and printer sharing.
Recently my laptop has a boot error and auto recovery and maintenances could not solve the issue. So I reset the laptop but kept the files and now it boots perfectly fine however none of the internet is working. It shows that I am connected to the wifi but there is no access whatsoever. I even uninstaled my network adapters and even tried a wired conmection and everything seems to not work. All my other devices are connected to the router perfectly.
I am using a lenovo y50 touch with windows ten 64bit.
I have already tried updating drivers, deleting temp files, disabling firewall (antivirus was removed from reset), and already tried the ip config release and renew.
I've scoured the web and pulled together enough info to enable me to create an incoming VPN connection on our dedicated P2P file "server" which runs Windows 8.1 Pro. On my Windows 10 Pro laptop, I've also created an outgoing VPN connection to the server. When I click the "Connect" button in "Network and Internet" Settings, the connection is established immediately with no error messages and a resulting status of "Connected". On the server side, the incoming connection also shows connected. Sounds like success, but no matter what I try, I can't find a way to actually access any of the drives/files on the server.
I expected the server to show up in the list of "Network" computers, thereby enabling me to map a drive to the shared folder(s), but no such luck. I made sure when I was creating the incoming connection on the server that I enabled "File and Printer Sharing", as well. Also, FYI, the server's WAN connection is on a static IP, and I've done the necessary port forwarding to the server's internal IP address. The one especially odd thing is that when I view the connection details on my laptop, it shows a subnet address of 255.255.255.255, and I don't have a clue whether or not that's correct. There's oddly little information that I can find that describes all of the possible entries that are required in the many and various dialogues that are presented while trying to setup the VPN.
I am connected to the internet, but in the toolbar it says Not Connected and Connections are available.
I am referring this to the Wifi Icon on the Bottom Right Corner near the Clock (Notification Area). There is no yellow asterix and I am properly connected to the internet. When I click this Wifi Icon , a window pops up and on its top it shows my ssid and below it shows connected.
Disconnect option is also here.
I have already changed my Wifi adapter - previously it was Wayona and now I am using Prolink. Both works well.
I was having some network problems and in the course of fixing them I uninstalled the network driver for my TP-Link AC600 Archer T2UH USB network card. This card has been working without a problem for months on 2.4 and 5Ghz channels and at high speeds > 150Mbps. When I attempted to reinstall the drivers, I can get connected to the WiFi but I get the Windows 10 message "Secured, no internet I have tried numerous drivers and I have now tried to connect using two separate NIC cards. (I had an old 802.11n usb adapter) as well as a 5Ghz wireless bridge that I used to use that connects to the PC via ethernet. All of these have connected to the network, but I get the same "Secured, no internet" message.
The only thing I can think of at this point is that I've somehow screwed up the adapter. I've looked at that ipv4 settings are they are all set to "Obtain an ip address automatically" and do not have a DNS name specified. I have attempted all the windows repair options as well and they return telling me their may be something wrong with the driver or the adapter. I'm at wits end.
I'm connected to the WiFi, but I can't access the internet. I was trying to fix my rocket league connection so I followed this tutorial to reset the internet options of internet explorer and then to restore the options. I restarted my pc and now I can connect to my WiFi but none of my browsers or applications can access the internet.
I am now encountering a series of bugs that i've never seen before in any windows.
OS: Windows 10 Pro official 64 Connection type: Wifi, no firewall activated
Applications impacted: Steam unable to connect, Google chrome unable to connect to install software, Mozilla Firefox same thing, and probably more apps get the same problem but i can download them and install if the installer doesn't have to download anything. It seems like a services that is not working inside windows installer.
I am able to navigate in Microsoft Edge, and some other apps, but unable to install other application, it is like the firewall is blocking the internet acces but the problem is no firewall are activated right now , nothing has been changed to the router settings as other computers on windows doesn't experience that problem. See screen captures below...
Screenshot 1 : it says check you firewall setting to put chrome to your white list
Screenshot 2 : your download has been interrupted, click ok to continue ( nothing has downloaded not even 1% )
Screenshot 3 : it's in English already just read...
I have a "Wi-Fi not connected" message in Control Panel Network and Internet > connections. The computer is a Windows 10 HP envy 700 - 414. The Wi-Fi is Broadcom 802.11. the driver is 7.35.336.0 12/7/2015 .... How do I connect it?
I got a new IBM Lenovo about a month ago that was running Windows 8.1. Before doing anything I immediately upgraded it Windows 10. When I hover over the network icon it says "Not Connected-Connections Available." The thing about it is, is that I am connected to the network and the Internet. I did update the network card driver today. I thought that would solve the problem, but I'm at a loss. It wasn't really a big deal until I wanted to connect to twitter and the weather apps that pop up when you click the Windows button in the lower left corner.
Roughly half the time I restart my PC I am told I am not connected to the internet, the Ethernet icon in the notification area shows a yellow triangle. but the thing is I am connected just fine and can access everything I normally do. Even microsoft.com. So this shouldn't be a problem if I can access all my stuff right? See things like Office and Skype use whatever detection method that is failing to determine if things can be sync'ed. The only answer I have is to reboot until the little yellow triangle goes away. There has to be a better way.
I am having this issue with a Surface Pro 3 on a dock, that when it is plugged in to a certain port it doesn't recognize the internet connection. If I take the surface to a different port and plug it in it works, if I get a different surface and plug it in to the port I am working with it works. Its only when the surface I am working with is plugged into that specific port, that it doesn't work. I need this surface plugged into this port, I can't plug it in anywhere else.
I have tried updating drivers, changing the dock, and also plugging in a USB to Ethernet adapter to bypass the dock. Nothing has worked. I also can't just get a different Surface because I don't have another surface with Win 10 on it. I need to have this Surface connected to this port but it will not work.
So I installed windows 10 and everything was fine until recently when my computer suddenly disconnected from the wifi network in my house. I've tried everything and nothing working, i even tried using the the Ethernet cable and it worked but as soon as I disconnect the cable it'll have no wifi access. It's not my wifi or router because My phone and other things connect and work fine. My network just won't show up on the list.
I was recently reading this article on ShieldsUp [URL] .... about disabling the client for Microsoft networks.Are there any real security benefits for doing this and if so what would happen if I did? e.g. would I still be able to receive updates from Windows? I've already unchecked file and printer sharing and not bothered about any file sharing.
When I go to a web sit, windows can't open it. when I run troubleshoot I get the message : windows can't detect networks proxy settings. I only have this problem since I downloaded windows 10.
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.