Networking :: Ipv4 And Ipv6 Have No Internet Access
Aug 1, 2015
Yesterday I updated my Windows 7 desktop PC to win10, and my internet worked perfectly, both wired and wireless. But today, it just stopped and until now it is still like that, famous yellow triangle. Wifi works. Tried almost everything, changing from DHCP to static, disabling firewall, updating/reinstalling network drivers. I am not using any VPN as far as I know. My network adapter is nvidia nforce.
After switching to static address, I noticed that my adapter changed from unidentified to network, but still in the status window of my adapter i see that ipv4 and ipv6 have no internet access. As I said, other devices work perfectly via wifi.
We use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
My internet worked fine and I didn't do any changes to it up until it stopped working. I've managed to fix the internet access to allow me to access the internet on my laptop through wi-fi but network access still says no internet access. Websites work however ethernet does not work! I can't connect online on my playstation because ethernet doesn't work. I've tried disabling and enabling the ethernet. I checked the cables, I re-installed the drivers and i turned off and on the router more than I could count.
The internet works on my laptop however a connection test on my playstation 3 says obtain ip address succeeded and internet connection failed. So I can't play online. I am absolutely certain the playstation 3 is not fault as I checked vigurously the settings and I've put in the right connections, however it still does not work? Should I buy new cables for the router?
My router is supplying IPv6 to all the LAN clients in my house. In particular, IPv6 is working on my Windows 10 desktop computer, but not this laptop. This laptop is a Windows 10 Pro OS, and I don't see IPv6 connectivity when I look at the connection in the Network and Sharing Center. When I look at the network adapter (wired) properties, it shows that IPv6 is enabled in the networking software.
The laptop used to have IPv6 connectivity with Windows 10 before I installed the giant threshold 2 update last night, now IPv6 not working on the laptop.
what I can do to diagnose the problem with the laptop? I've run the Windows troubleshooters, and they don't find any problems (of course). Even my Apple and Android mobile clients have IPv6 connectivity.
I've installed the 1511 update (threshold 2) on my desktop computer. It has always worked correctly with my dual stack IPv4 and IPv6 LAN, with both Windows 8 and Windows 10. Now, after the update, it will initially have IPv6 working after I reboot. Then, after a few minutes, IPv6 will stop working, and I see "no internet connectivity" for IPv6 from the Network and Sharing connection properties, even though the other clients in my house still have IPv6 connectivity.
So far, I've tried using netsh to reset the winsock catalog and the tcp stack, and have installed the latest network interface driver from the OEM. I also tried disabling IPv4, and seeing if the network troubleshooter could get the IPv6 connectivity going. That didn't work, either.
At this point, this behavior is a mystery to me. Right now, no IPv6 on this desktop. If I rebooted the computer, IPv6 connectivity would be restored for a few minutes... How to troubleshoot this one, it's just strange.
Upgraded to windows last week and all has been great. Today, I lost internet connectivity on my Windows 10 PC this morning. I still have Network access to view the Windows 10 machine from the rest of my network. . Restarted the router and modem and still no internet access. Device manager says no issues with my Realtek Network card.
I've been having the above issue at different times and it is getting a bit irritating to restart the modem(router).How can I permanently fix it so that my internet can be online 24/7 without me having resetting the box?And how come it says that I have no IPv4 connection but IPv6 does have a connection?
I have an issue on both my Windows 10 laptop and desktop PC. Both are DELL and new. Suddenly, my PC wouldn't connect to the internet using ANY wifi network. For this reason, I eliminated my WiFi modem - because the same issue happened when using my phone tethering. Using the Ethernet cable worked. Then a few weeks later my laptop has the same issue, but with this I can't plug in an ethernet port, because it dosen't have one. Both computers had IP Vanish VPN (probably nothing to do with it but thought I'd mention). I believe these issues happened after updates.
I've tried disabling firewall, antivirus, uninstalling Vanish VPN, using cmd from things I've seen recommended, updated network adapter on desktop.
Recently my laptop has a boot error and auto recovery and maintenances could not solve the issue. So I reset the laptop but kept the files and now it boots perfectly fine however none of the internet is working. It shows that I am connected to the wifi but there is no access whatsoever. I even uninstaled my network adapters and even tried a wired conmection and everything seems to not work. All my other devices are connected to the router perfectly.
I am using a lenovo y50 touch with windows ten 64bit.
I have already tried updating drivers, deleting temp files, disabling firewall (antivirus was removed from reset), and already tried the ip config release and renew.
so i have recently upgraded to window 10 and im having some issues with my internet. so the problem is that it keeps on saying "no internet access " and theres also a yellow triangle on my wifi icon.I have watch so many tutorials on how to fix this but still havent found the right solution.ive tried things such as reset my router,flush my dns,reset my ip,update/uninstall my driver,changing power options .
I installed Windows 10 yesterday on 2 lap tops. Everything was fine, i could access the web. I installed it on a third one this morning. It was seeing the network but said it could not access it. I changed the password in the rooter thinking that it would ask me for the new password has Windows 7 does. But it did not.
Now I also have the same problem on the 3 lap tops. I cannot find the place to put in my password like I did on Windows 7. If I try to access 'manually' it does not recognize either. I know it is not my rooter because I was able to access the new password with an old lap top still on Windows 7 and also with my cell. So password and rooter work fine.
I recently upgraded my laptop to Windows 10. Since then, I can not connect to Internet at all. The cable says no Internet when connected and wifi says limited access when connected. I am posting this through my phone because my laptop keeps saying limited access.
Today, when i opened my PC i found out that i have "No internet connection". The last time i used it was last night, and it worked like a charm. The problem is from the software itself I guess because other devices seem to be working fine connected to the internet. This also happened to me while using windows 8.1 but I got it fixed everytime with a simple "netsh" command. Now things aren't this simple, i tried multiple fixes and none of them worked. I tried to update the driver from the device manager but i can't find the microsoft and the producer driver, instead i find some outdated drives from like 2013.
I have two computers running Windows 10 Pro Technical Preview Build 9926. One computer is a desktop and it is working perfectly. The other is a new HP 15-F039WM laptop and it came with Windows 8.1 With Bing installed and it also works perfectly in Windows 8.1 mode. I resized the hard drive on the HP laptop to free up 150Gb of space and then installed Windows 10 TP Build 9926 from DVD. It still works perfectly when I use dual boot to go into Windows 8.1. When I use dual boot to go into Windows 10, the network icon in the system tray says "Unidentified network - No Internet access". I did swap cables, etc, but I knew that wouldn't work because the laptop does have Internet access when booting to Windows 8.1.
I read through some threads here after searching for DHCP and connectivity issues and even tried some of the suggestions such as using regedit to look at the network profile. There isn't a network profile. It is displaying a 169... IP Address, so I know that it isn't getting an IP. I tried to manually add the correct settings that work for Windows 8.1 (192.168.0.15 with 192.168.0.1 as the Gateway), but that fails.
My router modem is changed. The internet works properly in any other devices which are not win10.
From the wifi connection: it's connected to ssid but no internet access. I cant even ping the gateway. And from the troubleshooting it mentioned that some protocols are missing.
I'm connected to the WiFi, but I can't access the internet. I was trying to fix my rocket league connection so I followed this tutorial to reset the internet options of internet explorer and then to restore the options. I restarted my pc and now I can connect to my WiFi but none of my browsers or applications can access the internet.
I am now encountering a series of bugs that i've never seen before in any windows.
OS: Windows 10 Pro official 64 Connection type: Wifi, no firewall activated
Applications impacted: Steam unable to connect, Google chrome unable to connect to install software, Mozilla Firefox same thing, and probably more apps get the same problem but i can download them and install if the installer doesn't have to download anything. It seems like a services that is not working inside windows installer.
I am able to navigate in Microsoft Edge, and some other apps, but unable to install other application, it is like the firewall is blocking the internet acces but the problem is no firewall are activated right now , nothing has been changed to the router settings as other computers on windows doesn't experience that problem. See screen captures below...
Screenshot 1 : it says check you firewall setting to put chrome to your white list
Screenshot 2 : your download has been interrupted, click ok to continue ( nothing has downloaded not even 1% )
Screenshot 3 : it's in English already just read...
Almost every time I open the start menu, I get the proxy authentication popup, despite ticking the box save the details. There are also a whole bunch of potential proxy servers which can be connected to (I'm at university), and it randomly selects which one to connect to (as this would be the default for "automatically detect settings" in Internet Options.
Cortana isn't available in my country, and I've changed the search menu to not use bing to find results. I have no internet-accessing apps pinned to start. Why is it constantly trying to access the internet? Why won't it save my details after the first login despite it trying to access the same proxy? Maybe too many proxy requests lined up after each other?
I have been using a wireless connection but have decided its better for online gaming if i go wired/ethernet.
I am having a problem "unidentified network/ No internet access"
Now in the past with an xp pc i connected the ethernet cable and that was it i assumt there is some sort of set up i need to do for win10?
Also it may be worth letting you know i am not directly connected to the router via an ethernet cable, i am using the plug in things that sends the signal down the house electrical wires. Maybe this is an issue although it wasnt on my xp pc.
I have a gaming pc. Core i7. Gigabyte Sniper 5 motherboard with wireless lan, ethernet and intel ethernet. So 2 lan ports and a wireless connection. My network and internet is working on my mac iPad and phone. But for some reason on my pc it is showing that the connection has internet access but no apps will work. Skype, steam, origin, i.e, chrome. I have tried everything. I can use a personal hotspot via bluetooth with my phone to the pc as it has bluetooth as well and then the internet works with no problem. I am guessing it is a hardware issue ? I have uninstalled and reinstalled the software but it is not working.
But I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in - e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
I can not use my connection of telephonic access to internet with Windows 10, the options of configuration in protocol do not deploy TCP/IPv4 where I must put themselves them my supplier's DNS of internet, this is the one and only negative situation that I have found with Windows 10...
I have upgraded from Windows 7 to Windows 10. I have not had any issues in Windows 7. Everytime I restart my computer, it will say I will be connected to my WiFi but with a triangle saying no internet access. A solution is to open the device manager, uninstall the driver under "network adapters", unplug and plug the usb wifi adapter. Then enter the password for the network, then it works. I have to do this everytime I restart my pc.
I am using, Realtek RTL8192CU Wireless LAN USB Network Adapter...
Windows 10 worked great after initial download and installation. After 10 days, started seeing long delays in accessing the internet which I attributed to CHARTER (TV, phone, and internet). Now, when I try to open Edge, I get an error message:
Windows 10 ------------------------------------------------------------------------------ Explorer.EXE
The group or resource is not in the correct state to perform the requested operation. -------------------------------------------------------------------------------- I can still open my eMail (Yahoo! Mail) through the Explorer logo in the Startup Box, but when I click on links in an eMail message, nothing happens.
When I click to open Edge, the screen shows a quick white outline of the Edge (large Blue box), then disappears!
The Internet must still be working...my eMail messages are updated as usual, and I am receiving all the Windows 10 Updates as indicated in Settings.