Networking :: Logging Onto Corporate WiFi Networks
Jan 13, 2016
I can logon without problems to WiFi networks where I provide a passphrase/password to the Wifi-point. This is the case at home and at friends' and family.I can also logon on to public WiFi networks such as on trains, hotels, restaurants and what not. Some of these are like the situation described above, some are hotspot like.Where I run into problems is in corporate network situations. I'll have been provided with a UID and Password (which work, I verified them on my smartphone), see the WiFi signal I am to log on to and what is supposed to happen is:
After I have made the connection to the WiFi spot, my browser is to open automatically and bring me to a URL where I can enter the UID and Password after which I'll be connected. This does not happen. ORI should open my browser and attempt to access any url after which I am guided to a URL where I can enter the UID and Password
I'll see the WiFi point, make the connection, the browser does not open automatically and when I open it myself and try a URL (e.g. CNN.com), instead of requesting a UID and Password I just get the error 'server not found'...
View 9 Replies
Similar Messages:
Jan 5, 2016
How to configure my Win10 to automatically connect to multiple wifi networks?
I have wifi at home so when I get to the office I have to configure the "manage wifi settings" on my laptop, click "forget" my home wifi, and manually enter the office wifi password. I repeat the same process when I get home from the office or use the wifi in my brother's house. I had this on my Windows 7 but can't figure out how to in Win10.
View 2 Replies
Nov 16, 2015
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
View 9 Replies
Aug 4, 2015
So I installed windows 10 and everything was fine until recently when my computer suddenly disconnected from the wifi network in my house. I've tried everything and nothing working, i even tried using the the Ethernet cable and it worked but as soon as I disconnect the cable it'll have no wifi access. It's not my wifi or router because My phone and other things connect and work fine. My network just won't show up on the list.
View 1 Replies
Nov 16, 2015
I've recently upgraded my home PC from Windows 7 to Windows 10. I've been using a Realtek USB Wi-Fi adapter to connect to the internet. After installing the new OS and running it for the first time, I couldn't connect to my home network.
After reinstalling the drivers supplies by the manufacturer and reattaching the adapter, I attempted to again connect to the network. The "Verifying and connecting" message displayed, but after closing Settings and returning to the same page, all of the Wi-Fi settings have disappeared, like the drivers have crashed.
View 1 Replies
Oct 17, 2015
There are a few networks I cannot connect to and I'm not sure why. Most networks like the one I have at home, I am able to connect, however when I am at my friend's house or some cafe, it doesn't let me connect to the internet. I tried updating my drivers and it still doesn't connect. It was able to connect few months ago when I had windows 8.1 but when I upgraded to windows 10, I started facing these problems.
It doesn't tell me what to problem is either. It just says "Cannot connect to network"
View 3 Replies
Nov 7, 2015
I am connected to a wireless network but the connection is not showing on the Network and Sharing Center active networks. Also, I am unable to change my Network Location from Public to Private as there is no link on the Home-group page. I upgraded from Win 8.1 to Win 10 and already updated wifi drivers.
View 2 Replies
Jan 10, 2016
I can't change my profile location to private, and I can't make my computer register that it's connected with either my WiFi or my Ethernet. I've looked through the steps posted here, but to no avail. I don't even have the NetworkList key in my registry! I am online with Firefox and Chrome just fine, but Edge won't connect, nor can I connect to the Store. I did a wipe and reinstall a few days ago, partially to try and resolve this issue, and partially to resolve some other issues dating back to the Insider builds, but this problem is still happening. I'm at my wits end, and I can't even connect to my wife's PC to transfer files. I've enabled network discovery and file sharing on public networks, but that didn't even make a difference. Also, since I reinstalled Windows, I've been unable to activate it, but I think that is tied to this network problem. It's like all the new apps and features won't recognize the connection. I'm not running any security software besides Windows Defender, so that shouldn't be an issue.
View 3 Replies
Oct 3, 2015
In Windows 7/8 there was a setting, a small checkbox "Treat all future networks as public and don't ask me again".
You can see it in this picture - [URL] .....
In my version of Windows 10, I don't appear to have that option. I could try deleting this registry key ...
HKLMSystemCurrentControlSetControlNetworkNetworkLocationWizard
Delete the key: HideWizard
Perhaps there's a simpler way than export, delete key, if wrong result import saved registry file. Have I missed a setting somewhere to set the network location?
View 5 Replies
Nov 8, 2015
Settings > Network & Internet > Manage Wi-Fi Settings
Here on Microsoft Support page, there's a tutorial on how to "turn off Connect to suggested open hotspots and Connect to networks shared by my contacts"
Configure telemetry and other settings in your organization (Windows)
I used the exact code mentioned there:
REM Disable Wifi Sense
REG ADD "HKLMSOFTWAREMicrosoftWcmSvcwifinetworkmanagerconfig" /V "AutoConnectAllowedOEM" /T REG_DWORD /D "0" /F
But the above code only turn off "Connect to suggested open hotspots" and not "Connect to networks shared by my contacts". How can I turn off "Connect to networks shared by my contacts" via registry?
View 3 Replies
Jan 31, 2016
Is there a way I can change all connected networks to private instead of public with a click-able script? The problem was that a User was connected to an open network using a VPN which then also connected showing Public. With both as Public, they could not map to a network resource. I fixed it using the "go to home-groups and change network settings, etc." But surely there is a way it could be handled with a simple script to edit same? End result was the VPN showed private while the open WiFi he connected to still showed public but he could access the server now.
View 1 Replies
Nov 29, 2015
I just updated my media center to version 1511 of windows 10. Via wifi, downloaded and installed ok i thought. But have found i cannot see any wireless networks. Normally about 7 up in my area.
I've tried uninstalled the device and installing it again.
I've tried checking for newer drivers, but isn't any.
I've tried resetting these in command prompt (admin) net sch advfirewall, int ip, int ipv6, winsock and rebooted afterwards.
I've tried plugging the usb wifi adapter into a different usb port.
I've tried restarting the Router. Mobile phone picks up wifi in the same room.
View 1 Replies
Nov 2, 2015
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
View 7 Replies
Jan 9, 2016
Running Windows 10 on a Dell Latitutde I was trying to setup a Netgear Wifi Extender because the Fios Router does not reach all the way to the other side of the house. I did the setup (so I thought) the way the manual told me and my computer was trying to connect to the extender, but it just stayed in "Connecting..." For a long long time. Eventually I gave up and thought I'd hit the reset button on the extender and try again.
Now my wifi adapter finds NO networks. All my other devices see all the networks.
The only other time this has ever happened I had accidentally hit the network adapter switch on the side of the PC, so I'm 100% sure that's not the problem and that it is 'on' in the settings. I've tried restarting the pc several times as well as toggling the adapter on/off, airplane mode on/off, and the switch on the PC on/off.. And it still sees no networks..
View 1 Replies
Nov 24, 2015
I have just replaced my WiFi card from (BCM943228HMB) to BCM94352HMB. Before replacing my WiFi card i done the following:
Made computer boot in safe mode with networking.
After that i replaced the card, then booted into windows 10 (safe mode with networking) and checked device manager. Everything was OK (See attached picture). I then tried to turn on WiFi, but it does not turn on.
View 9 Replies
Nov 24, 2015
I have internet service from AT&T which worked great until I updated to windows 10. My pc now connects to the wifi just find, I can download updates, but I can not browse a web page. When I go into open a web page I get an error that the page can not be displayed. If I vpn to my work it works just fine then. I have reset the browser settings, created a new account on my pc and nothing has worked.
View 6 Replies
Nov 27, 2015
I have no wifi after upgrading to Windows 10 from Windows 7. Looking at Device Manager, I believe my Network Adapter is Intel(R) 82578DC Gigabit Network Connection. Looking online, I do not find a driver for Windows 10.
View 4 Replies
Jan 24, 2016
All of a sudden I get "your device does not support Miracast" and wifi is gone !
I don't want Miracast.
Acer Laptop;was win 7 on it had upgraded to W 10 Pro and was using wifi until now ?
View 2 Replies
Oct 31, 2015
i have tried connecting to my school's apartment however it always goes to no connections are available and then airplane mode and shows connections are available. the Wi-Fi connects just fine in all other areas of the school byt not in my apartment. The apartment is located inside the school and there are a couple of access points. I can connect to my friends Wii-U just fine but not my laptop? And when I troubleshoot, it says "Problem with router or access point.
View 1 Replies
Aug 21, 2015
I've installed windows 10, but I've got a strange problem. My WiFi connection randomly gets limited for one second. It isn't so bad, when I'm browsing, but if I wanna download something... that's terrible :S 'cause when the wifi stops, the download stops too... What can I do? I think it's not my laptops problem, because before win10 - on windows 8.1 - it worked fine. If it matters something, it gets limited in about every 5 or 10 minutes.
View 9 Replies
Aug 23, 2015
I was wondering if it's possible to utilize both WiFi and ethernet in tandem. I'm pretty sure some of you are going to tell me that I can only access the internet through one of these, up to my bandwidth limit, but that's not what I mean.
I'd like to access the internet through my WiFi connection, yet have a wired connection through my router to access the files on the other computers in my house.
View 1 Replies
Feb 17, 2016
I have a brand new MSI QE62 apache pro, and I just installed an update to windows 10 (the computer came with win 10, so i cant revert back to 7 or 8) and after the update, I no longer have a visible wifi adapter in my network settings, and i obviously cant connect to wifi as a result.
View 2 Replies
Apr 14, 2016
Title says it all.
View 5 Replies
Nov 4, 2015
My PC would be connected to WiFi, but I wouldn't be able to go on any site. I restarted my PC and the damn thing locked up on the HP logo screen! So I had to hold the power button to turn of my laptop.
View 1 Replies
Sep 12, 2015
I don't really know how to say this but my wifi wont turn on, when I diagnose the driver it says I need to turn the wifi button thing on but this laptop doesn't have one so how do I enable wifi without the button
View 9 Replies
Feb 10, 2016
I upgraded my friends HP laptop to Windows 10. The issue now is I can't enable Wifi. The card is recognized correctly in Device manager and no issues is found with it. It looks like it is fine. However in the Network Settings WLAN is set to "Off" and when I try to turn it on it always jumps right back to off. eg. I can't enable it.
HP clearly state any laptop bought prior to specific date in 2013 will not get any driver updates from their side for windows 10. And updating through device manager only tells me it's the newest driver available.
The Wifi card i Broadcom 4313GN card. I searched for win 10 drivers but did not find anything.They only offer linux drivers on their homepage...
So any solution to the issue or link to a win 1' driver for this wifi card?
View 2 Replies