Networking :: Losing Networking Protocols Every 24 Hours?
Jan 22, 2016
After the major Windows 10 upgrade that happened I think in late November to early December of 2015 my network connection started dropping periodically. This is wired connection directly to my router and I've done all the netsh winsock reset and other solutions listed all over the internet, but like clock work I lose internet connection to just my desktop. All my wireless devices continue to work just fine. When I select repair connection I get the error of protocols are missing. The adapter has a visual status of identifying network. I thought it was a DHCP issue, but it still happens with a static IP address. This so frustrating as the only thing that fixes it is a reboot and then it seem like the clock resets for another 24 hours. I've tried going to device manager and updating drivers but it tells me the drivers are up to date. I've uninstall the drivers and allowed the OS to reinstall them to no avail. I've even deleted the adapter and restarted and allow it to find the hardware and re-add the driver and none of this seem has fixed the problem.
View 2 Replies
Similar Messages:
Dec 6, 2015
Noted immediately after 1511 total system update, yet may have been inherited from an earlier build...
All is working well, yet Network Troubleshooter reports "one or more network protocols is missing."
Various posted remedies have been verified or implemented, to no avail.
Win 7, on the same machine, reports no errors.
View 9 Replies
Jan 1, 2016
What would cause my computer to have one or more network protocols missing and how can I fix it?
Below is the screenshot of the troubleshooting report.
View 9 Replies
Jan 12, 2016
So I've had this issue for about three days now. I am able to connect to my home router, but I am unable to connect to the Internet. Troubleshooter said "One or more network protocols are missing". Not sure what happened, never touched networking except for connecting to my network. I created a thread on Microsoft Answers website. You can view the page here: One or more network protocols are missing on this computer....
View 1 Replies
Feb 23, 2016
What can be done about "Missing Network Protocols", Windows 10 both computers/laptops?
View 2 Replies
Jan 4, 2016
I just had this very annoying issue for a while, and scouring the internet proved to no avail. However, I stumbled upon the solution by myself. Simply go into an elevated command prompt and enter netsh int ipv4 install and restart your computer.
This is what solved the problem for me, though I had already tried a few suggestions (resetting winsock, giving permissions in NSI, etc) so that might have something to do with it.
View 9 Replies
Feb 10, 2016
So I have been without internet for a couple weeks and have spent hours trying to figure out what is wrong with my computer. I only have an ethernet port on my machine, connected to my router via powerline adapters (which work with my other PCs). Windows troubleshooter tells me that there are missing protocols, I have tried various things and nothing has worked. I have already tried: winsock reset(tool), replacing my winsock registry keys with another windows pc, I have tried that sfc /scannow command, no errors were found, i have also tried disabling netbios.
At some point I accidentally uninstalled 'microsoft network adapter multiplexer protocol', dont know how to reinstall it and now I am getting and ip config error from the troubleshooter. At this point I am thinking about re-installing windows. Is there a way to do this without losing settings for applications? This is such a freaking mess.
View 3 Replies
Feb 10, 2016
When I run the troubleshooting I keep getting the message that says:
"One or more network protocols are missing in this computer".
When I run the "netsh winsock reset" in the Administrator Command Center, I get the messages:
" The following DLL cannot be loaded: NETIOHLP.DLL" and "The following DLL cannot be loaded: NSHIPSEC.DLL".
View 2 Replies
Feb 23, 2016
this issue has plagued me forever since windows 10, and even slightly in windows 8.1. this issue would come randomly and i cant connect to internet even if i were a point blank in front of the router. running the troubleshooting does not fix it. the only way to fix it most of the time is to disable the wifi adapter for about 2 minutes and re enable it again. in some cases only a reboot can fix it and in rare cases it can only be fixed by uninstalling the wifi drivers and starting over.i have tried with 3 different wifi adapters, 2 computers and 2 routers.
it seems to struggle the most with connecting to optimum wifi/Xfinity wifi (which my laptop is added to my account) its mainly this optimum wifi here causing issues making router itself a issue but still. the other router is my 4g sprint hotspot, sometimes on rare occasion the same thing happens.
View 6 Replies
Jan 2, 2016
This happened after the latest major update.
I've tried the following steps with no success 1) sfc /scannow. This showed no errors
2) netsh advfirewall reset netsh int ip reset*** netsh int ipv6 reset netsh int ipv4 reset netsh winsock reset *** This command did not work originally until I went to HKEY_LOCAL_MACHINE/SYSTEM/CurrentControl and changed Control/NSI folder 26 permission to everyone (This box was unchecked again after reboot
3) ipconfig /flushdns ipconfig /registerdns ipconfig /release ipconfig /renew
4) Disabling and Renabling the Network Adapter within device manager.
5) Uninstalling the driver
6) Installing the latest drivers both from the Asrock/intel website and googling my network adapter.
7) I saw the fix where someone deletes the Windows 10 WIN and WIN2, and replaces with a clean Windows 7/8 version in this registry: HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock HKEY_LOCAL_MACHINESystemCurrentControlSetServicesWinsock2
- Did not work also, it gave me a new problem no ethernet something which troubleshoot can't also fix.
8) Finally Reset W10. Still get the same error
View 9 Replies
Feb 23, 2016
This just happened recently, and still not fixed.
My router modem is changed. The internet works properly in any other devices which are not win10.
From the wifi connection: it's connected to ssid but no internet access. I cant even ping the gateway. And from the troubleshooting it mentioned that some protocols are missing.
View 4 Replies
Jan 17, 2016
I purchase my laptop last March and was running 8.1. I upgraded to 10 and am now having issues with wifi being connected and then losing wifi connection for only outlook and micorsoft edge. I can still access the internet through chrome or internet explorer. I have call Microsoft twice and they have not corrected the problem. I took the laptop back to Micro Center and they could not find any issues. The first session with Microsoft the technician removed some temp files and ran a malware program, which seemed to fix the problem, but the fix only lasted an hour or so. Wifi will come back by waiting for a while or by shutting down or by signing out and signing back.
View 5 Replies
Aug 10, 2015
Why do I constatnly lose my internet connection since upgrading to Windows 10? Did not have this problem with Windows 7 and Century Link. Once it is gone, cannot get it to reconnect. Keep getting a reset error message each time when running the diagnostics. If I can't resolve this soon, will be going back to Windows 7!!
View 3 Replies
Feb 10, 2016
I have suddenly noticed a problem with internet connection. I cannot download any apps from Microsoft store (with unknown error message). Strange is that each other software (cloud clients, browser, ....) works perfectly.
I have already searched for solution on google and found command wsreset.exe but this did not work..
I have also tried network troubleshooter. It has found these errors:There is one or more missing network protocols. Windows sockets registry entries are missing
I have tried to repair these errors with some netsh commands, which actually did something but did not solve anything.
Another solution is to reinstall network drivers but this did not work either.
View 4 Replies
Dec 28, 2015
I have w10, running a static ip address through time warner cable in Ohio. Time warner said they had a problem on their end, ever since then I can't connect to our security cameras. I run a powerline from the house to the office., have reset my computer, modem and wireless router. Still getting the same error - one or more network protocols are missing from this computer. I tried talking with time warner cable - no go!
View 9 Replies
Mar 5, 2016
Which Network Protocols should I enable or disable for my PC?
My PC usage and router set up:
- file downloading while also browsing web or streaming video
- I don't do any lan/network sharing
- Torrent file sharing
- QOS is disabled on my router
- The PC is connected with Ethernet cable
My current settings
[ ] Client for Microsoft Networks
[ ] File and Printer Sharing for Microsoft Networks
[ ] QoS Packet Scheduler
[ x] Internet Protocol Version 4 (TCP/IPv4)
[ ] Link-Layer Topology Discovery Mapper I/O Driver
[ ] Microsoft Network Adapter Multiplexor Protocol
[ ] Microsoft LLDP Protocol Driver
[ ] Internet Protocol Version 6 (TCP/IPv6}
[ ] Link-Layer Topology Discovery Responder
View 1 Replies
Feb 24, 2016
Trying to reinstall a WD MyBook external hard drive. Receiving the following "One or more network protocols are missing on this computer" Following diagnosis receiving "Restore network protocols to default settings", and "Windows Sockets registry entries required for network connectivity are missing". My computer is an HP Pavilion 23 all-in-one. My wireless router (connected with an Ethernet cord) is an ATT 67XHG8k.
View 4 Replies
Feb 10, 2016
I even went to the point going to the configure in Network Adapter Settings > Configure > Ticked off Allowed The Computer To Turn Off This Device To Save Power
It worked For 15 minutes or so, then the Wifi kept on dropping out, I've Restarted and Done All The Router Stuff, That Other Blogs Suggested, Still Nothing, Wifi continuously Drives me insane, now it drops to 2 bars of signal all the time.
I also did ipconfig/ flushdns and that didn't work either, though i was hoping it would, but anyway, I have port forwarded my IP so I can play Mine Craft with my cousin, but other than That, why it just drops constantly in wifi signal all the time.
What I can do to get it staying 5/4 bars signal Strength and not drop when I'm watching Netflix or playing Mine Craft or Battlefield 4 Multi Player. what else I can do, if they need my Wire Less info/name of it, it is
Intel(R) Dual Band Wireless-AC 3160
and yes it is up to date in patches and etc... it worked fine even in Windows 7 Home and Windows 8.1 Home, but as soon as I grabbed Windows 10 Home Update, it just keeps on doing this annoying bug.
View 5 Replies
Oct 28, 2015
Still losing wifi sporadically for no apparent reason. Other devices still working on same wifi router, so signal is not a problem. It drops off at least once a day.
Tried all the recommended fixes including updated drivers, down-shifting to 802.11b.
Only "solution" is to disconnect and reconnect. Feels like going back to dial up days!! This part of Win 10 is appalling - NOT an improvement. And of course it always happens as the most inopportune time.
I initially went back to Win 7 and it all worked fine for over a week without one issue. As soon as I returned to Win 10 it started immediately, so it's definitely a Win 10 issue.
View 9 Replies
Feb 10, 2016
From one of my Windows 10 machines I am unable to access the shared folders on the other. The troubleshooter says "One or more network protocols are missing on this computer" and "Windows Sockets registry entries required for network connectivity are missing."
I have run sfc /scannow, but no problems were found. I don't get the problem when sharing in the other direction or when accessing the shared folders on the same machine.
This comes amidst a cluster of sharing-related problems. Before the reboot after which the present problem manifested itself, shares going in the other direction were invisible in the network browser (but could be accessed via the search bar). Also, the machine in question does not appear in the HomeGroup browser even though it is a member of the HomeGroup.
View 3 Replies
Nov 15, 2015
Problem trying to connect to internet on laptop, but all working as normal on desktop.
Investigations revealed....one or more Network Protocols are missing on this computer, also Windows sockets registry entries required for network connectivity are missing....this on both Ethernet and wireless but they had been working perfectly since the update last week.
My laptop supposedly required "Internet connections Package Version 3.0 Publisher Microsoft Windows."
After messing about for an hour without success I loaded the 1511.. ISO.. knowing that I could not connect to the internet to download anything, this seemed to solve the problem, (fingers crossed) I can only assume this made the internet connection possible.
View 9 Replies
Dec 28, 2015
I try to update a Win7 PC to Windows 10.
After a while the update starts searching for updates, this search keep running for hours and hours without any result.
The screen keeps showing 'Searching for updates (0%).
Also the Win7 update on the pc keeps running without any result.
View 2 Replies
Aug 1, 2015
We use a lot of VPN PPTP Connections. On most we turn off "Use default gateway on remote network". See the image below that shows where this setting is turned off.
We cannot open the properties for Internet Protocol Version 4 on VPN connections under Windows 10. This is located at Network Connections and Properties of a VPN Connection. Networking Tab, then select Internet Protocol Version 4 and click Properties. But under Win 10 the properties dialog does not open.
This has been tested on several Windows 10 systems and we have enabled Administrator and tested under that login as well.
View 8 Replies
Jan 6, 2016
I have several PCs at home as well as music streaming devices such as Pure Sensia and Freecom MusicPal. The PCs run a mix of Windows 7 HP and Ultimate all 64bit. I use Serviio to share music to the streaming devices and PCs. The PCs all use password protected network shares, and I selectively share certain folders from different PCs to enable both simple file sharing and backup which are simple script driven processes.
All has been working reliably for years until (Dum-Dum-Dum!) Windows 10...
A new laptop arrives with Windows 10 preinstalled.
I've got it up and running but cannot work out how to add Microsoft cloud accounts, such as those directly linked to OneDrive, onto the windows 7 PCs to enable password protected sharing to and from this new laptop.
The accounts have the same usernames on each flavour of windows PC, but the windows 10 version also has an email.
View 9 Replies
Aug 4, 2015
I have an app named "Timer+" which after it is set and finishes makes a loud beeping noise until it is turned off.
I can have up to three timers running at the same time.
I have discovered if my QUIET HOURS are turned on, then no sound will be made (at any time of day)
when any of my timers finish. Only a notification appears in the action center. (NO BANNER, NO SOUND)
When Quiet Hours are turned off "Timer+" works perfectly.
Any way to set custom hours for QUIET HOURS. What are the default Quiet Hours?
View 8 Replies
Dec 12, 2015
I am on the east coast and my computer has always reflected EST but with Windows 10, it shows six hours off when I set it for EST. I have to set it to -11 hours off from GMT to get the time correct. That would be fine but that time zone does not allow for Daylight Savings time changes so it's OK now but when there is a time change, this computer will be off by an hour the next day.
I updated from windows 7 and the computer kept hanging so I did a complete install and am seeing this time problem now. I tried using a NIST program that syncs with the government time server but Win 10 won't let it sync saying I don't have administrator privileges. That is a separate issue I'll have to look into but as it stands, I have this computer set for EST, I am 100 miles from New York City and it is showing 4:50PM but the real time for me is 10:50AM.
View 4 Replies