Networking :: Network And Printers Not Showing?
Jan 4, 2016
We have recently updated our four work computers to windows 10. Mine shows none of the network computers or printers under network. Under printers it shows one of our four printers but says driver unavailable and the spooler is not working.
I can get onto two of the other computers using a link under my quick access bar which was set up on our previous windows, so it can go to these computers, but they are not showing up on the network.
I have googled some of these questions and tried control panel/ administrative tools/ services/ to turn on UPnP Device host to automatic but it wont start and comes up with Error 1068: The dependancy service or group failed to start. Similar for SSDP discovery and Print spooler.
Under change advanced sharing options I pick 'turn on network discovery' but it wont stay on/keeps going back off.
I may be able to find a way to get onto the printers I need but would ideally like everything to show up properly under network.
View 1 Replies
Similar Messages:
Jan 14, 2016
i have been suffering slow WiFi speeds for a while now and sky have replaced my router.
I have two computers both running windows 10 with the latest build.
Now since i started with this router i have lost my home network and i have not changed anything on the computer.
some times i can see my other computer but not able to connect to it. sometimes i can see nothing. sometimes i can see the sky router and sometimes not. I am not able to see my printer at all on ether computer.
My network is set to private on both computers and file and printing is turned on.
All i have done is plugged in a new router.Sometimes i can see on my network a device called AirTies WAP what is this.
View 1 Replies
Nov 15, 2015
I can reach them by the quick access shortcuts I added before the upgrade but they don't show up in WE Network.
Rebooting my WD MyCloud solves the problem until next time I reboot my Win10 c.
View 6 Replies
Dec 2, 2015
I recently upgraded the 3 machines on my home network to windows 10 home.
Currently when I open up "this PC" and click on network, only one of the 3 computers shows up, and this machine is not the local machine on 2 of them. However If I type in the UNC address for the other machines I can access them.
If I set up a home group all the computers show up in the home group roll out under "this PC" but still not in the network.
Something else that is strange. If I look at "network and sharing center" two of the the computer see one private network name and the other one sees a different name.
View 4 Replies
Jan 20, 2016
Why suddenly out of the blue my network quit showing one of my computers? I have a tablet and laptop both with windows 10. my tablet still shows both computers, but my laptop no longer shows the tablet. I didn't change anything. What can cause this and how do I fix it?
View 4 Replies
Sep 15, 2015
I have DELL Inspiron 14R N4010. Automatic upgraded to Windows 10 Home. Previously I have Windows 7 Home Premium. After upgrade I didn't see the wired network adapter. However my wifi is working fine and can access Internet. I tried to re-install the LAN driver (Atheros AR8152 PCI-E Fast Ethernet Controller Driver); it ask for upgrade/repair/de-install means driver is already present in the system. In spite of that upgraded the dirver (got the upgraded driver setup from Dell). Unfortunately, the device is still not visible in device manager.
View 4 Replies
Oct 20, 2015
I upgraded to windows 10 from 8.1, ever since then, my Huawei 173 stopped working. The led light flashes, yet the network signal is not showing, the display hangs and several other issue.
View 1 Replies
Oct 15, 2015
I have a Lenovo Thinkcentre preloaded with Windows 10 Pro. Sometimes when I go to File Explorer and click on Network it shows something called "Ralink Linux Client" connected to my home network. When I select its properties the only information I get is it's MAC address. But the funny thing is when I check my router's list of connected devices the Ralink Linux Client doesn't show up on my router's list even though it shows up on Network on my computer. I am using a Buffalo WHR-300HP router. I also have a Thinkpad notebook computer running Windows 7 Pro on my home network and this phantom device never shows up on Network on the Thinkpad. This Ralink Linux Client comes and goes on my Thinkcentre showing up sometimes but not all the time.
I tried researching this on the Web and apparently others have had this problem too both with Windows 7 and Windows 8. But I am reading conflicting information about what might be going on. One forum poster suggested that this means that the router connected to the network is picking up another router within range. Someone else suggested that this is actually something to do with the local router's internal components.
edit - My Thinkcentre is connected to my router via Ethernet. My Thinkpad is connected wirelessly.
View 6 Replies
Nov 1, 2015
I am unable to access the windows store but i can connect to the internet with nearly everything else...
Not a massive issue as I don't use the store much but it is quite annoying as it only happens sometimes.
I believe all my drivers are up to date... the MOBO is a asus b85m-itx..
View 1 Replies
Dec 26, 2015
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
View 1 Replies
Aug 18, 2015
having some issues sharing local printers from windows 10 to xp.
I've atached the error message which i get. the process works fine utill i reach that point.
The process works without an issue in reverse (eg saring from xp to windows 10 but that doesn't suit my needs.
View 2 Replies
Nov 28, 2015
The printers do not show in "device manager" but they appear in Devices & Printers. If I select it and click on "remove" it temp goes away but reappears again later.
View 5 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies
Sep 2, 2015
Ok so got a new usb WiFi adapter. I installed the driver first which I downloaded on my phone then transferred to my pc via usb cable. Have tried reinstalling multiple times, still won't work. I'm guessing the problem is there's no win 10 drivers for it. NOTE: I did have a old usb adapter working with no driver before but not even that's working even with drivers uninstalled. The new adapter shows up in device manager with a problem indicated with a code 10.But not in network devices.
View 1 Replies
Sep 5, 2015
Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "?
View 3 Replies
Feb 10, 2016
I'll have connections available on my computer (Windows 10 Home 64-Bit HP) but whenever I click the connection menu, they don't show up, which means I have to reset the modem, wait the 15 minutes it takes, and then the connections FINALLY show up. Once I'm connected however, if I click the menu again, the connections wont show up. The image I've connected shows what I'm talking about. I can wait for a long time and connections still don't show up. I was wondering if there's a way to troubleshoot this without resetting the modem every time I want to use my computer.
View 2 Replies
Nov 7, 2015
I am connected to a wireless network but the connection is not showing on the Network and Sharing Center active networks. Also, I am unable to change my Network Location from Public to Private as there is no link on the Home-group page. I upgraded from Win 8.1 to Win 10 and already updated wifi drivers.
View 2 Replies
Dec 22, 2015
When I'm accessing my media library on the computer with my phone it does show all movies/songs in the same folder. I have chosen to share different folders like, E:movies E:kids E:adults C:user*videos. all those folders are shown as only one folder on the device i'm accessing my library with. Sub-folders within the paths does show.
In Windows 7 the folders did not batch up as only one folder, each path was shown separately.
View 1 Replies
Jan 2, 2016
On my home network, the other Win 10 PC is suddenly showing in my taskbar near the task view icon. I like the idea and would like to set the other Win 10 machine to do the same but I can't find out how or why it decided to show up.
View 1 Replies
Sep 29, 2015
I have several server drives mapped to my Surface Pro 3 tablet, and from time to time they disappear from Windows Explorer and XYplorer (an Explorer replacement). They are still there and mapped, as Net Use shows them mapped properly. But to get them tho show up in either Explorer or XYplorer, I have to physically remap them (right click: Map Network Drive...) and when I do so they already show up with the proper drive connection but won't appear unless I finish the remapping. XYplorer has a tool to reconnect all network drives, but nothing happens there.
View 5 Replies
Aug 21, 2015
Latest driver installed, StarTech USB300WN2X2D, Mediatek/Ralink RT3572L
View 9 Replies
Dec 4, 2015
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
View 2 Replies
Mar 5, 2016
I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?
View 6 Replies
Dec 16, 2015
I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?
View 1 Replies
Jan 4, 2016
I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.
What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.
View 2 Replies
Jan 10, 2016
I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.
Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.
What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.
This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)
View 9 Replies