Networking :: Network File Sharing

Jan 26, 2016

I need this for work. I don't want to have to buy a laptop with Windows just to do this. I am running UbuntuGnome 15.10 on my laptop. I need to connect to file shares on a Windows 10 Desktop on the same network. This desktop has one user. The user has it set up so that when computer is powered on, it automatically logs into the user's account without a password. I need to access a folder that is shared on that machine.

When I attempt to access it from laptop, I am prompted for a USER ID and PASSWORD for the WORKGROUP. If I enter the user's ID without Password, i cannot access the folder. I have tried different combinations but cannot get access. I want to automount this when I log into my laptop as I need access to work.

View 4 Replies


Similar Messages:


Networking :: Find Network DVR In Network And Sharing Center?

Oct 1, 2015

How do I find my network DVR in Network and sharing center?

View 4 Replies

Networking :: Cannot Stop Sharing A Folder On Network

Oct 31, 2015

I've got a problem in stopping sharing some folders across my home network. Not sure if it matters, but I'm on Windows 10 Pro, running my admin user account.

Anyways, I have a folder I want to unshare from my network called Pictures2 which I believe is empty. The problem is I don't seem to have access to it even though it seems to originate from my PC.

While I was able to unshare the 'Videos2' folder by going into the Properties normally, I can't stop sharing 'Pictures2' from my network even though my computer is the one sharing it. Double-clicking gives a "Windows cannot access XXX" error.

I did notice a difference between these folders which may or may not be important - The Pictures2 folder doesn't have an owner (either that or it can't display it in advanced security settings) while the Videos2 owner was SYSTEM.

My user account was in the 'shared' list of both these two folders which is strange, as I couldn't access Pictures2 but could access Videos2.

Honestly I don't know how or when they were even created and I can't find them on my local drive if they're even meant to be there.

I tried using the manual cmd method suggested in another thread but get this:

I would like this Pictures2 folder unshared, and if I know where it's located on my PC I can delete it too.

View 1 Replies

Networking :: Network Setup - Sharing Public Folders

Dec 29, 2015

Trying to set up a network for the first time. My intention was to share public folders but when I right click on my user folders (e.g. PCUsersDaveDocuments they are shown as "Shared" and clicking on "Stop sharing" doesn't seem to do anything. Am I missing something.

View 3 Replies

Networking :: Unable To Host Virtual Network For Internet Sharing

Sep 2, 2015

I've been getting the following error : "The group or resource is not in the correct state to perform the requested operation" Things I've already done trying to solve the problem:

1) Clean install of Windows 10.

2) Made sure my WiFi network card doesn't go to Sleep, by disabling that option in the Power Management.

3) Have set hosted network mode to allow

4) Made sure that my network with internet access is set to sharing

Additional info: It was working fine untill some random windows update, after which the PC started getting BSOD when trying to host a network. Reinstalling drivers started giving me this error instead of BSOD. Then I rolled back to windows 8.1 and checked again. It was working flawlessly. I assumed it to be a driver problem, so I upgraded to Windows 10 again and this error is back.

View 7 Replies

Networking :: Turning Off Password Protected Sharing On Private Network?

Nov 6, 2015

I have a Windows 10 PC, with one of it's functions being that of a file server/NAS for my home network. I set it up with password protected sharing and a user account/password that everyone knows and uses to access it. I didn't really have any reason to use password protected sharing at the time, but it was the default so I left it.

Now I have a couple of network streaming devices that can't handle password protected sharing, so I was considering turning it off. Is there any reason not to turn off password protected sharing on a private network? Obviously I don't mind everyone on the network having access, but I was wondering if it had any other potential security benefits that I haven't thought of.

View 1 Replies

Networking :: TP File / Printer Sharing Doesn't Work In Mixed Environments

Oct 13, 2014

I'll first describe my LANs network environment. Three Windows PCs and one Linux PC. Each PC is sharing one folder called TEMP.

The PCs:
WIN10 - Windows 10 TP (non-enterprise edition)
WINXP - Windows XP Pro SP3
WINXP0 - Windows XP Home SP3
CENTOS - CentOS 6.5

Using NetBIOS over TCP/IP on each PCs for name and IP address resolution
No hosts file contains the names of the LANs PCs
The Computer Browser service is active on WIN10
The Computer Browser service is disabled on all the other Windows PCs
Samba services on CENTOS is on but the master browser in the WIN10 PC

Firewalls on all PCs is off except for WIN10 but the rules allow file/printer service through The same primary user account is used to logon to each PC No HomeGroup networking used. All PCs are in the same workgroup=LANSYS

Now with all that stated, I'll describe the problem. From WIN10, I can see the list of PCs in the workgroup and access the shared folder TEMP on each PC

From WINXP, I cannot see the list of PCs in the workgroup and can only access the shared folder TEMP on the other PCs when I use the IP address of those PCs in either My Network Places, Internet Explorer or Windows Explorer. I always receive the "Workgroup not accessible ...." popup window when attempting to view LANSYS from My Network Places.

From WINXP0, it's the same as WINXP

From CENTOS, in order to see shares I use the smbclient command. When I execute the command for WIN10, the command fails and reports that NetBIOS over TCP/IP is disabled on WIN10

But NetBIOS has to working on the LAN because I can ping each PC from any PC. I executed ipconfig/all on each Windows PC and it displays NetBIOS is enabled.

So it appears that NetBIOS Sessions service over port 139 inbound traffic on WIN10 is either buggy, crippled, or broken.

View 19 Replies

Networking :: File Explorer Network Tab Shows PC (This File Is Empty)

Dec 25, 2015

Under the Network tab of File Explorer, I can see three entries, one of which is my router (with attached Hard Drive) and two computers, each running Windows 10. When I expand the router entry, I can see my hard drive files. I can also see my Users icons when I expand one of the computer's tabs. However, when I click on the other computer's name to search for users, all I see is a message that "This folder is empty". In fact, the folder is not empty, as there are two users on the computer. How I can get this computer to show users, etc.? 

View 6 Replies

Networking :: NAS Not Appearing Under Network In File Explorer?

Jan 31, 2016

I have been having issues with my WD MyCloud NAS not showing up under Network on the left navigation pane of File Explorer. I am able to access the NAS by entering the host name (WDMYCLOUD) in the address bar in File Explorer. I was able to find a solution that fixes this and makes my NAS appear in Network as expected. The solution involved running Command Prompt as Admin, executing some commands, then restarting the computer.

What I would like to do is automate this process by creating a batch file that will:

Open Command Prompt as AdminAutomatically enter specific commandsClose Command PromptRestart the computer

View 2 Replies

Networking :: File Backup Not Working With A Network Drive

Dec 29, 2015

I recently set up a Homegroup on a Win10 laptop so I can see another PC on the network. That PC is running Win8.1, and I would like to use it for file backup. The devices are visible on both ends of the network and have connectivity, but when I choose to use the File Backup function from the laptop, nothing transfers and eventually I have to restart because of no response from the system. Also, my browser will stop working. I have added the PC as a network location and specified the location for backup, but is has locked up twice now. Could this be a routing issue? I previously ran the auto backup feature to a memory card, but need more space.

View 2 Replies

Network Sharing - Can't Access Disk Of Other Computer

Oct 26, 2015

I have the following problem. I upgraded to Windows 10 and now I can't access the disk of my other computer.

- Both PCs have the disks access open for everyone (home network).
- Both have the same password.

When I try to enter the C: drive of my other PC, I get an error that I don't have the privilages to do so.(I see them on the network, but I can't access them).

View 1 Replies

Network Sharing Not Working Properly - IP Address Already Assigned To Another Adapter

Sep 16, 2015

I have a problem with Windows 10 Network Sharing feature. It assigns fine the IP address 192.168.137.1 to the network card that acts as the bridge to connect other computers to the Internet. But it's not working, and when one goes to the share NIC adapter and right-click on it and select PROPERTIES, and then from the list of it shows one select :

"Internet Protocol Version 4 (TCP/IPv4) then you see that everything is fine, the IP address 192.168.137.1 shows there and the subnet 255.255.255.0 also there. BUT ONCE YOU CLICK ON OK in that window, another Window POPS UP and a message saying:

"The IP address 192.168.137.1 you have entered for this network adapter has already being assigned to another adapter (in parenthesis it shows the same adapter that it's assigned in the SHARING tab in the main adapter), so there is not way to get out of that 'network card properties'. further down the message in that window says: DO YOU WANT TO FIX THE PROBLEM BY CHANGING THE IP ADDRESS FOR THIS ADAPTER? and the choices are: YES or NO

The command Line in an MSDOS window run as administrator: IPCONFIG /ALL doesn't shows any other virtual or real NIC with the IP address 192.168.137.1 except for the one that was assigned in the "Sharing" tab in the properties of the real NIC that connects directly to the ISP box.

I don't know if I have explained well this issue, but all I can say it's that no other network adapter has that IP address. I have a VirtualBox virtual adapter that it has an IP address totally different, the same as another Virtual VMWare adapter.

I even went to control panel > Device Manager > Delete both NIC's (the one that connects directly to the Internet and the one that acts as the SHARING network, and the issue remains the same.

I cannot use the Wireless Router to connect my tablets or WI-FI Cellphones.

I have several Operating Systems in the Same Computer to boot with, and Windows 8.1 for instance Network Sharing works fine in the same computer.

I'm running Windows 10 PRO 64bits

View 1 Replies

Networking :: Sharing Printers To XP?

Aug 18, 2015

having some issues sharing local printers from windows 10 to xp.

I've atached the error message which i get. the process works fine utill i reach that point.

The process works without an issue in reverse (eg saring from xp to windows 10 but that doesn't suit my needs.

View 2 Replies

Networking :: Can't Stop Sharing Folder

Sep 4, 2015

I Upgraded to Windows 10 two days ago, I shared one of the folders on my desktop and now I can't close the share.

When I click stop sharing on both the ribbon and the context specific menu, after I right click the folder, nothing happens.

View 8 Replies

Networking :: Sharing Files To Windows XP?

Oct 4, 2014

Well, I've just about configured everything I need for Windows 10. Last is file sharing. It's the same old story with Microsoft sharing. See from one, can't see from another. I'm not using homegroup. The problem or error I receive is that on the XP laptop, the message says I don't have permissions. Need file sharing with the old Windows platforms and Win10?

View 7 Replies

Networking :: Turn Off / On Password Sharing Doesn't Exist

Nov 6, 2015

I'm using windows 10 prof 32 bit and joining a domain.

I'm trying to share printer and folders but everytime people trying to connect it, they need to enter user and password to access it. I know the way to fix it is by turning off the password sharing in the network sharing but the option to turn off / on password sharing in network sharing simply doesn't exist. How to turn it off?

View 9 Replies

Networking :: Sharing Ethernet And WiFi Connections On One Computer

Jan 15, 2016

My desktop is connected to my router by Ethernet. However, the printer I use is in my wife's office on another floor. It is a wireless Epson Artisan 730. I have added a Dlink DWA-171 wireless usb adapter to my desktop to print wirelessly to the Epson.

However, every time I want to print, I have to disable my Ethernet connection so the WiFi connection will see the printer. Then I'm done printing and I re-enable the Ethernet (faster, more stable).

View 2 Replies

Networking :: How To Rename Network 2 To Network 1

Sep 5, 2015

Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "? 

View 3 Replies

Networking :: Hosts File Alias Not Working With File Share

Sep 26, 2015

I can set an alias in the hosts file on a win7 machine and access it just fine but doing the same in Win10 prompts for creds that never work even when entered correctly. What did win10 change?

hosts file entry:
127.0.0.1 hostname alias

ip - works fine
hostname -works fine
alias - Prompts for creds and creds don't work

I have gone to the extent of fully disabling UAC from reg, same outcome. Network and file sharing is set to password access and not homegroup. Simple file sharing is off.

Something to note. I always disable ipv6 form the adapter but when I ping my hostname it shows the ipv6 loopback. Why is that? When I ping the alias it returns 127.0.0.1 ipv4 loopback that was entered in the hostname.

View 2 Replies

File Server - Network PCs Not Appearing

Dec 13, 2015

I am trying to set up a file server with other computers on my network but they are not appearing the advanced sharing section. My computer is called KSERVER and I would like GEZA-PC to appear there. They are both on the same network connection and it appears in the Network section of the File Explorer.

[URL] .....

View 1 Replies

Networking :: Can't Connect To Network

Dec 4, 2015

Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?

For example:

DHCP server did not respond
DHCP server did not issue an IP addressStored password incorrect; enter new password: _________
WiFi adapter card not respondingInsufficient virtual memory

But no, none of that useful information was offered. How am I supposed to fix the problem?

View 2 Replies

Networking :: Connecting 2 PCs Without Network

Mar 5, 2016

I have a desktop PC running Win7 64Bit Ent. It's not actually in use, so nothing is connected. I also have a laptop running Win10 64Bit which I'm using to type this post. I have some audio files on my desktop that I'd like to pull off of there, and put them on my laptop, and then maybe on a cloud. My 1st question: Is it possible to simply use a USB cable between 2 USB 3 ports if I simply power up the desktop with the USB cable connected? Does the USB protocol provide for me to see those HDD's on the desktop via the laptop? I'm quite limited for physical space, and I don't need the desktop to be running permanently, I just need to get these files off of it. If that's NOT a solution, what is the next easiest method?

View 6 Replies

Networking :: Network Security Key

Dec 16, 2015

I have forgotten my network security key, all of the info I find points me to connections, wireless properties, etc..... This does not match my updated Windows 10. What is the procedures for the latest updated Windows 10?

View 1 Replies

Networking :: Can't See Other Computers On Network

Jan 4, 2016

I have two Win 7 computers on my wired network and 6 Win XP computers on this same network. This main computer was Win 7 and just upgraded to Win 10 in November. For a year this network has worked just fine, plug and play basically when I set it up, now after Christmas shutdown (2 weeks), I can't see any of the computers on this network. The only thing I can see is the media drive on a computer called 6Head2. All I really do is transfer files from this main computer out to those 8 other computers.

What is wrong with my computer? Network discover, file sharing all checked, network location was changed from Public to Private today by me. But it did work last year, even with the network location being public.

View 2 Replies

Networking :: Can't Access Network

Jan 10, 2016

I have a home network that includes-Two Windows 7 PCsTwo Linux machinesA Brother MFC7820N networked multifunction printer..All the above are on wired connections. Then there's an 802.11n wireless link for laptops and media devices.I'm just setting up a new machine that's running Windows 10 Home, using the wireless network. I was annoyed to find that Brother don't have a full-function Windows 10 driver for the 7820N that supports scanning, but the Brother site says the built-in drivers in Win 10 should work for basic printing.

Problem: I successfully added the printer device to Windows 10 (at the 3rd attempt) using the "manual advanced" method. The printer has an entry in the hosts file, and was added by host name.The printer fails to print, with a "not responding" type message. The driver also can't pick up the status info from the printer.

What's really weird is-I can ping the printer from the W10 box (and the other machines) by either IP address or hostname.However, this printer has a web interface. I can access this from any of the Windows 7 machines, but the Windows 10 machine says "web site failed to respond" or somesuch. This happens with any of: Edge, IE11, or Chrome browsers.I can't even make a manual connection (telnet to port 80) from the Win 10 machine (timeout).The Windows 10 machine CAN access all the other devices on the home network, including the web servers (Apache) on both the Linux boxes.

This looks like the web access to that particular address is being blocked somehow. I have tried disabling my AntiVirus package (Kaspersky), but that makes no difference. Is Win10 perhaps detecting an "old" web server on the printer and refusing to talk to it? (and why would that prevent printing using lpd?)

View 9 Replies

Networking :: No Network Access

Nov 8, 2015

Nothing is working to get my computer to connect to the internet again. It was working fine yesterday so don't know what was changed. All other devices can connect. Using my laptop to search.

IPv4 is connected but I can't get IPv6 to connect at all. No error messages anywhere.

Fixed. Updated drivers worked. Just had to restart a couple times for it to work.

View 9 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved