New Monitor - Windows Startup Not Showing Anymore
Oct 10, 2015
i got my new Benq 2411z and its really nice, configured everything.But my problem is the following:
The monitor does not show the windows startup anymore, so i cannot see windows loading and cant access bios menu at start.
Somehow in device manager there is a non-pnp monitor listed which is listed as standard, if i uninstall or deactivate it, it does not affect my problem and its back after restart.
Furthermore i cant disconnect this non existing monitor via windows control panel.
I need to set the benq monitor (shown as monitor 2) as main monitor in windows 10 settings, but it does not change anything about my problem with the start up.
When i start the computer the displays says: "no device found"
When the computer booted and is finally on desktop it says: "input: dvi" and the desktop shows
Moreover my CCleaner says i have "microsoft basic display driver", but i have got a gtx980..
View 9 Replies
Similar Messages:
Feb 10, 2016
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
View 3 Replies
Aug 16, 2015
I have a Toshiba laptop running Windows 10. My main display monitor is a LG 24 widescreen plugged into the laptop.
With Windows 7, I had no problems in using Fn key f5 to set the display to only the LG (showing as "CRT" on the screen). This did not change when I re-booted the laptop.
With windows 10, it reverts back to to the default setting and I get the laptop screen and the monitor lit up.. I frequently get a different resolution on the display too, until I open the laptop and re-set the display with the Fn key. This is annoying, as I use an external keyboard (which doesn't flip the Fn key) with the laptop lip down.
I've also tried via Control Panel (Display) but that doesn't hold the setting either.
View 3 Replies
Mar 13, 2016
On startup screen: no boot device available
View 1 Replies
Aug 15, 2015
Start up after installing Windows 10 and the final loading of start ups hangs up on NEC SpectraView II my monitor software color calibration as it continues to loop.
View 1 Replies
Jun 22, 2015
I tried to use lumia software recovery tool as well but it said software package not available for this phone. How can I resolve the problem?
View 1 Replies
Jul 31, 2015
I just updated to Windows 10, but all of my programs went into the Windows old folders. How can I permanently delete them. I am using a program called Eraser but it's taking forever and this is the second time I have been using another type of file shredder. Which is the best program....
View 1 Replies
Jan 5, 2016
CPU not showing temp in Open hardware monitor or core temp
Used to show ok, I am certain...In the BIOS when I boot the PC it shows ok approx 60-65oC
But not in the aforementioned apps....cant think why
View 9 Replies
Nov 11, 2015
windows not turning off their screen as scheduled? If so is there a fix to get it to turn off as scheduled?
View 1 Replies
Dec 21, 2015
After upgrading from windows 8.1 to 10, my monitor stopped working, showing a "no signal" error then popping to black screen. The computer works I can hear it running when I power on, but the monitor shows nothing.
I tried to remove the CMOS battery for a few minutes (something I read from another thread), but didn't work.
Specs:
Operating System
Windows 8.1 64-bit
CPU
Intel Core i5 4690K @ 3.50GHz
Haswell 22nm Technology
RAM
16.0GB Dual-Channel DDR3 @ 666MHz (9-9-9-24)
Motherboard
Gigabyte Technology Co., Ltd. H97-D3H-CF (SOCKET 0)
Graphics
22M45 (1920x1080@60Hz)
Intel HD Graphics 4600 (Gigabyte)
4095MB NVIDIA GeForce GTX 760 (Gigabyte)
Storage
1863GB Seagate ST2000DX001-1CM164 (SATA)
View 1 Replies
Aug 3, 2015
I am really trying to like windows 10 but I am having problems from games not working to Windows not detecting the refresh rate of 144hz on my VG278HE it just says 60hz and generic monitor drivers.
I am very close to putting Windows 7 back on my system.
View 1 Replies
Apr 4, 2016
I just purchased a Samsung 850 Evo SSD, and after connecting it up, my new SSD as well as my older WD Green HDD are not showing up anywhere in Windows. I can't seem to find them in Device Manager or Disk Management. They both do, however, pop up in the BIOS. The motherboard is an Asrock b85m pro4 if that matters.. I'm not really sure how to troubleshoot this issue. I have an 840 Evo as my boot driving which is starting Windows up just fine.
View 1 Replies
Feb 26, 2016
Without any third party software: Can I with Windows 10 set new windows to open on the monitor (with dual monitor setup) from which it was launched?
By default Windows opens a new window on the monitor on which it was used last. So if I close file explorer on monitor 1, the launch it from monitor 2's start menu, it will still open on monitor 1 because that is where it was last active, even though I launched it from monitor 2.
View 1 Replies
Mar 11, 2016
Not sure if you will understand my problem but I tried to search it everywhere but was not able to actually find the correct searching criteria so I was not able to fix my problem. My laptop has win 10 and it was always in English. All my windows used to have the menus (file, edit, view...etc.) on the left and the (X) to close the window on the right. for all my windows like control panel and my computer. But now they are reversed (X) on the left and menus are on the right.
View 5 Replies
Jun 1, 2015
just turned on my pc and i can see an icon in my system tray saying " Get Windows 10 " . What is this ? Is it like the final version or demo ?
View 1 Replies
Aug 13, 2015
On the Start window after booting or restart I get a small Run window and associated statement: cannot find C:Program Filesuser extensionsclient.exe; how do I make that go away?
View 10 Replies
Nov 22, 2015
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
View 9 Replies
Nov 27, 2015
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
View 6 Replies
Aug 22, 2015
Since upgrading to Win 10, I have noticed that with most (but not all) system shutdowns and restarts, it result in a nice red X with the 'Windows was not properly shut down" Clicking on it gives no clues, just says "The previous shutdown at [time] on [date] was unexpected.
There is no other indication other than what the Reliability Monitor reports. I would not even be aware there was an issue. The PC starts as normal with no errors on every boot.
View 3 Replies
Aug 10, 2015
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
View 1 Replies
Aug 14, 2015
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
View 1 Replies
Oct 6, 2014
In task manager I can see all programs which are supposed to start together with windows, however, none is starting. Every time I start windows I have to start these programs manually.
View 9 Replies
Sep 20, 2015
I downloaded windows 10 from Microsoft windows website and I installed it but I thought of reverting back to windows 7 and so I did. The windows 7 boot up logo showed up but got stuck in between the boot logo. then the windows startup fixing program would be recommended for me and I did it but failed to fix the boot up error. and i cant even start windows from the safe mode as well. So what do i do to bring back windows 7 back up. and which one windows is good 7 or 8 or 8.1 and sure that i wouldn't wanna go back to 10. so how do i start up windows again?? Yeah i guess i will have to make a bootable USB or DVD drive. I would like to go for usb but not sure how to create one bootable usb drive.
View 10 Replies
Aug 11, 2015
I had installed Windows 10 for over a week now. The issue of windows not sleeping after sleeping once after startup from a shutdown has been going on for a couple of days.
I've been through many of the power options that deal with what devices wake up the computer, and I have turned them all off at one point which did not work, Windows 10 still refused to sleep properly after sleeping once.
I've went to power options and made sure that the sleep button makes the computer sleep, but it still refuses to sleep after it slept once. I'm really unsure where to solve this, and I don't think this issue has been addressed with Windows 10 yet. Perhaps this is a bug?
View 1 Replies
Aug 19, 2015
So this is really hard to explain so maybe my image will clear any confusions. Btw when Im talking about windows Im not talking about the OS Im talking about the applications like Google Chrome window, file explorer window, etc. So my problem is when I move a window from one place to another (like in the image) it only shows the outline. Before it didnt do that. Maybe I touched something and now I dont how to change it.
View 2 Replies
Aug 22, 2015
I just installed windows 10 on my laptop
ASUS ROG G751JM Laptop
NVIDIA GeForce GTX860M with 2GB
1TB HDD 7200 RPM With 256 GB SSD
1.5TB HDD 5400 With 128 GB SSD
1TB HDD 5400 With 8 GB SSD
Intel Core I7 HQ-4710 2.5 G
Memory 8G
When I start some programs the program will start up normal, It shows up as running in the task bar I can even alt-tab and see the running program but I cant see the program on my desktop in order to interact with it. I have tried cascading all my windows it still will not show up. Ive tried right clicking the program on the task bar and selecting "move" that does not work. This only started when I installed windows 10. Some of the programs that wont show up are.
ASUS GPU Tweak
Netflix
Control Panel (occasionally happens but can get it back by restarting computer)
View 4 Replies