New Desktop Will Not Boot Into OS
Feb 10, 2016
I just received my PC and Windows 10 will not open. After bios starts the screen says, Hi there Let's get a few basic things out of the way. Asks for home country, language, keyboard layout, and time zone, then click on NEXT. Then I have a screen that says, Get going fast, click on USE EXPRESS SETTINGS. The screen then says Just A Moment with small white balls going in a circle above. At this point the screen goes black except for the white mouse pointer. I have tried two different monitors using the VGA port, one TV using the HDMI port, all with the same results.
View 9 Replies
Similar Messages:
Aug 14, 2015
How do I boot my pc straight into the desktop without the username and picture shown.
View 1 Replies
Aug 7, 2015
Today when i booted up i noticed ive no desktop background, i can cycle through backgrounds and i can see borders changing color but my desktop stays black, ran sfc /scannow which it found/fixed errors but nothing to do with my issue, rebooted, ran ccleaner, still broken....
View 3 Replies
Aug 29, 2015
This problem is as old as Win itself, it was in every version of Win and now in 10 I have it too. Everything worked fine until a few days back everytime i boot or restart the PC all the icons go to the left side of the screen and I can't seem to figure out why. Yes, the automatic icon arranging is turned off, yes there is no malware in my PC, no I don't have dual monitors and no I do not want to install 3rd party software to solve this problem. I want to get to the root of it and solve it.
View 9 Replies
Jul 26, 2015
My wife is about the worst technophobic person you will ever find and I have our Win8.1 laptop set up so that it boots directly to the desktop. I will put a standard user profile for her but I would like to make Win 10 as easy for her to get used to as I can.
View 9 Replies
Jan 31, 2016
Everytime I boot up my Desktop and sign in, my desktop doesn't show. Only my mouse, the rest is black.
View 2 Replies
Aug 6, 2015
I'm using an Intel SSD 240GB 520 series. Always loading very fast, i.e., about 8 seconds from cold boot.
Since windows 10 is installed, boot time is about 20 seconds and desktop icons take some time to refresh and load their images.
Regarding the boot time: I've narrowed it down the an unexplained read/write access on my external HDD eSATA which is used for backups, though currently all backup process are stopped.
When I remove / turn off my external HDD, boot time is about 8 seconds. I can't figure out why all of a sudden it required this access to this HDD.
As for the slow icon refresh.. how to fix this.
View 4 Replies
Feb 10, 2016
Running Windows 10 on a Dell Venue 8 pro Tablet. Several months ago, and just yesterday I lost my desktop. Turned on the Tablet went to the desktop picture after signing in and ... nothing. No live panels, no desktop icons, the action center would not appear. Just the desktop picture. If I tapped on the picture, the icons would appear for a split second. Anything pinned to the bar along the bottom would work. I was able to get to system restore and restore to a couple of days ago. That worked. What happened. Don't really know how to fix other than system restore.
View 1 Replies
Apr 21, 2015
A desktop icon suddenly appeared on my desktop.. If I delete it, the whole desktop is also deleted... The desktop folder on the drive, does not contain that icon...
View 7 Replies
Aug 30, 2015
Some files get backed up by File History but not Desktop or files on Desktop. I have excluded Videos, Documents, Music and Pictures as I do not want these backed up with File History.
I have turned off File History and turned it back on again, reselected the backup drive F: and selected the only folder in File History...
However, Desktop is in my user profile...
What have I done incorrectly or not done correctly?
View 5 Replies
Jan 27, 2016
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
View 3 Replies
Nov 10, 2015
After installing a 32 bit windows 10 from a USB by mistake I decided to upgrade to the 64 bit version. I have 3 hard drives, one of which is an ssd that I am trying to install the OS to. After downloading and setting up the media creation tool and creating a USB I restarted and boot form USB.
I followed the steps and deleted the existing windows 10 partitions on my dad and tried installing straight to the unallocated space. After the installation completed it restarted the installer, which is not what happened when I previously successfully install windows 10. I then changed the boit order to have my ssd first and rebooted, which gave me the Reboot and select proper boot device or insert boot media error.
Confused I loaded up the installed and there were correctly partitioned installs already on the ssd ( although one partition looked a little small). I tried reinstalling windows 10 with the same result over and over.
View 1 Replies
Sep 24, 2015
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
View 3 Replies
Feb 2, 2016
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
View 3 Replies
Apr 29, 2015
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
View 9 Replies
Dec 15, 2015
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
View 4 Replies
Jun 15, 2015
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
View 9 Replies
Dec 19, 2015
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
View 7 Replies
Feb 2, 2016
I used MicroTool partition manager to delete the extra partitions on an OS drive with win10 (leaving just the main C partition on the drive), and now the laptop will not recognize the SSD with the OS on it, and obviously cannot boot. I also tried using the bootable partition recovery tool from MicroTool, but restoring the partitions also does not work, it will only allow one of the two partitions to be restored.
View 9 Replies
Oct 27, 2015
Basically, I have a really bleepty BIOS that will only let me change the boot order with secure boot disabled and legacy boot enabled. I need secure boot because I just installed windows 10 onto a new drive and it won't activate. I have heard that this has something to do with secure boot being disabled. I still have the activated drive, which is the primary drive. Is there anything I can do to change the boot order?
View 7 Replies
Oct 25, 2015
I've got a Lenovo Desktop that was upgraded from 8.1 to 10 just after the release. I have a Toshiba Laptop which I upgraded from 7 to 10 about a month ago. Occasionally, the desktop screen for the desktop would be the default desktop image for the Toshiba laptop with "Toshiba" in the lower right corner.
Last night I performed a clean install of 10 on my Laptop. I went to bed and let the laptop work the updates as I was sleeping. When I woke up the Lenovo, again, the desktop showed the Toshiba default image rather than the one I had changed it to previously.
I had researched the issue but only after making this post is when I realized that all accounts under the same Microsoft ID will sync, including the desktop personalization. Not exactly a feature that I like. I'd like to turn that feature off.
View 3 Replies
Aug 10, 2015
Control PanelAll Control Panel ItemsPower OptionsSystem Settings
Unchecking the "Turn on Fast Startup" command in the above setting path does not do it. There is supposed to be a motherboard software for enabling a normal startup the next time the computer is restarted.
View 9 Replies
Oct 9, 2015
Today I installed Windows 10 on my machine (ASUS N55SF laptop) for the first time on a separate hard drive. Now I have Windows 7 on my main hard drive and Windows 10 on my new drive (the latter being an SSD one). After installing Windows 10, I got a new boot option in my BIOS called "Windows Boot Manager" which is set as default, but it runs Windows 10 directly, I can't see any boot manager (I can assure "Windows Boot Manager" behaves this way because my BIOS lets me override the boot option, so that I can directly run any boot option, and this is probably the only way I can run Windows 7 currently).
If I go to Start → Advanced system settings → Startup and Recovery → Settings, I only see Windows 10 in the "Default operating system" drop-down menu, while I only see Windows 7 if I do this while on Windows 7. It's like the two OSs are not completely aware of each other.
View 9 Replies
Feb 10, 2016
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 Replies
Sep 29, 2015
Over the weekend I upgraded from 8.1 (which was working perfectly) to Windows 10. Unfortunately, it had a few problems - namely that it would 'hang' at random intervals (5 minutes to 5+ hours). In an attempt to isolate what was causing this, I was advised to use Msconfig to do a clean boot.
Unfortunately, in the process, I have rendered my PC near-useless, as I accidentally ticked the box "Use original boot configuration" under Selective startup. (I know, I know. I'm so cross with myself.) As a result, I am now presented with what looks like my old boot screen - offering Windows 7, Windows 8, Windows 8.1, Windows 8.1 with Media Center, but no Windows 10.
(I originally had Windows 7 on what is now my D: drive. I ended up dual booting with this and Windows 8, but I'm pretty sure the version of 8.1 - which I've just upgraded to Windows 10 - was a clean install. It's certainly on my SSD (C: drive).)
Anyway, by using Change defaults... - Choose other options - Troubleshoot - Start-up Settings, I was at least able to bring up the screen that gives you Safe Mode as an option. This allowed me to boot into Windows 10 Safe Mode.
I went back to MSConfig and eventually found a way to deselect 'Use original boot configuration' (it was greyed out for a while). However, on restart, it still showed me the old options, i.e. no sign of Windows 10 Pro. It seems the only way I can currently boot into Windows 10 is via Safe Mode.
I've tried various things today - I tried to use Bcdedit to force it to look at the C: not D: drive, and I've tried booting with a Windows 10 DVD and using the Repair option (but partway into the repair process it starts thinking it's a Windows 8 machine again...).
I've just 'spoken' to a chap at Microsoft and he is adamant that there's no alternative (because there's no Refresh option under Settings - Update & Security - Recovery) but to reinstall Windows 8.0, and then upgrade to 8.1 and then Windows 10. As you can imagine, I really, really don't want to go down that route. But, at the moment, I can't even roll back to 8.1.
Given that I can still - sort of - boot into Windows 10, the correct MBR/BCD/whatever must still be on my C: drive somewhere, surely?
View 4 Replies
Nov 16, 2015
If I save things to the desktop I can't see them - either on the desktop itself or in File Explorer showing the desktop - until I press F5 to refresh.
View 1 Replies
