I have a booting problem with my Windows 10, after having it for two months. Few days ago after turning my PC on, I had a message Starting Windows Repair, after some time it shows me the same screen with text - Diagnosing your PC. Then after having a black background, a light blue screen appears with error 'Your PC did not start correctly', it gives me options to restart it again or to open on Advanced options. There are so many of them, I tried all except the one with Restarting PC and deleting files, all the others, including Safe Mode won't work. I am stuck now here and can't use my PC.
Windows won't boot, and it also won't repair install, refresh, reinstall (Windows 10), chkdsk, boot repair etc. I have tried all these so unless anyone can think of anything else I will have to do a clean install and upgrade. I suspect the hard drive has failed though.
So I force-restarted my computer to hopefully refresh the system but I just got back into the loop. It may be a conflict with some files but for now it's never-ending. What should I do?
I'm trying to resolve an issue with a Windows 10 desktop, HP small form factor purchased with OEM Win 7. Windows Update suggested Windows 10 and now the machine boots to the automatic repair screen but there is no mouse or keyboard function where the option panes appear.
While I did purchase the computer myself originally, it was purchased for the use of my church group, and two weeks ago came under the care of my co-deacon and friend. So, let's just say there is no recovery media now for Win 7 or Win 10. I can create a recovery disk here at home from one of my local Win 7 systems, but not sure if that will work or not.
I'd be perfectly happy to un-install Win10 from the machine, but there doesn't seem to be a way to get to the recovery partition... all F-key options have been tried.
So when I'm trying to log on, my computer does the whole automatic repair thing, but constantly loops. Now, I know this has been notified before, even for windows ten, but it seems I just can't fix it. All the solutions on the articles I've seen don't seem to work .
Although, the upgrade this morning initially was successful - it did reboot into Windows 10. When I restarted the machine, it's now stuck in the setup repair loop. None of the options seem to work, even if I try and have it reinstall windows while keeping my files, it still restarts and goes back to the setup repair. I really don't want to do a clean install as I didn't make a backup of my files (which I will always do from now on).
So i found a possible repair on fixing the current situation o the infinite loop from this forum [URL].... around step 13 it said"If any one of them are 0 bytes, then you should stop what you're doing now and seek an alternative method of recovering your system, because Windows cannot function with a 0-byte size registry hive ". I have 0 as my "RegBack" values and i can't find an alternate .
Recently I got a new gaming PC which came with windows 7. The day after i upgraded to windows 10 and it was working fine. Yesterday i was using my PC and then the task bar disappeared so i decided to restart the computer to try and fix it. When the computer turned on again it went through the normal startup process but when it got to the windows logo it said preparing automatic install and then kept looping through startup and the windows logo. I have tried doing the system repair but when I press F8 nothing happens, so right now all i can do on the computer now is access the BIOS.
have an Asus Laptop running Win 10, upgraded from win 7. While reading one of the many links from Facebook, using Chrome as a browser, I got a popup that looked like some kind of ransomware . The popup would not close so I turned off the computer.
Now when I turn the computer on it flashes the Asus logo. Then “preparing automatic repair”, “diagnosing your computer” followed by “repairing your computer” appear. It then tells me that the PC did not start correctly and gives me the option to restart or advanced options. Restart brings me back to this point.
Advanced options gives me three options, Turn orr the PC that does that, Exit and continue to Win 10 that gets me back to the previous step or troubleshoot. Trouble shoot gives me the options to reset or more advanced options.
Reset is either a partial or full removal and reinstall or windows. I have some academic software that I do not want to lose if possible and in any case do not have any media to do a Windows reinstall.
The advanced options gives me six choices.
1 System Restore, but there are no restore points found. 2 System image recovery, but I do not have an image disc . 3 Startup repair, starts the process all over and does not find the problem. 4 Command Prompt, appears to open a working command prompt. 5 Startup Settings, Gives me a non clickable list of options but just continues the loop. 6 Go back to previous build. It warns me that I may lose apps and any changes I have made, but not my personal files.
The System is an ASUS laptop, X54C, made in 2012 with Widows 7 Home premium updated to win 10. I have no other access to the computer.
I've been using Windows 10 for few weeks now and it's been really good.
8GB Ram 1 TB Hard Disc Asus Motherboard i5 processor
Used the PC as I would normally do and shut it down last night. Recently installed the latest update for Win 10 as I recall. Otherwise no new changes or installation to the system.
So now when I switched it on its showing Automatic Startup Repair and it diagnose the PC but fails every time and shows a blue screen of startup repair where I can:-
- reset PC (reinstall but this fails at 36%) - system restore or image restore ( but can't use either) - startup repair (doesn't work either) - command prompt (tried sfc/scannow and they won't allow me to do so unless I restart but keeps getting same error.
Tried unplugging the hard disc etc but same old loop again.
Obviously I can't click on anything or type anything because the loop is constant. I've been reading forums etc for the past couple of days for a fix for this Automatic Repair loop..nothing that would work and I notice many others the past year also never found a solution.
I burned on a dvd a Windows 10 bootup thing- as suggested by someone. That doesn't stop the loop either- and yes, I did get to the page via F12 that allows to change it to boot from the DVD etc.
I have upgraded from windows 8.1 to Windows 10 The upgrade went well and i was able to use my computer initially. After i restarted my computer, i am stuck in Automatic repair loop.
I have downloaded a copy of windows 10 iso image and made a windows 10 USB boot drive. I tried repairing the startup issue as suggested in some of the forums but no joy.
Its a new PC setup three months ago. Sad there was no hardware or app compatibility check before upgrading.
Config: Intel I7 with 16GB RAM. dual boot with Ubuntu
This afternoon my wife was doing something on the computer, got stuck, and rebooted. Once she rebooted a screen popped up into a repair diagnostic screen and said it was diagnosing the error to repair it. Only problem was that it didn't repair anything and the options that were available were all tried and nothing fixed this infinite loop issue. Luckily, I backed up my system with Acronis TrueImage so as we're speaking my PC is being restored. Windows 10...
I recently upgraded to an SSD, I don't know if this is related.
While my PC was idle, it shut down for some reason (probably updates). I came back to an "Updating Windows" screen -- the exact screen used when installing, that big circle icon with a percentage. I have never had a computer boot to that on its own, but I assumed it was some important update. I let it do its thing.
Later, I came back to it doing this strange boot loop:
Motherboard splash screen Normal W10 loading icon Screen flash A second, slightly larger loading icon
The "Updating WIndows" screen. Starts at 0%, raises to 75% a split second later, then disappears and turns off. This happens in about 1/5th of a second.
I booted into a startup repair disk, and ran startup repair. It said it couldn't fix issues. Next, I ran a chkdsk, there were issues it fixed but the boot loop is still in place.
Since I just installed an SSD last week, I still have my previous disk with the operating system still functioning. I booted it up, turned off automatic updates, and checked to see what may have caused this on my current disk. There were 2 updates available: A flash player update for IE, and Windows 10 version 1511 10586. I assume it is the latter, but how it installed, since I DID NOT AUTHORIZE THE INSTALL. Automatic updates are enabled, but I would have thought it'd install in November, when it was released (not 2 months later!)
I don't dare install it on my backup, in case I have to re-clone the SSD.
I have had this loop for 4-5 hours now, and I have not found any fix for it. I am using build 10240. I have tried reverting back to windows 7, and that failed. Tried start-up repair, that failed. Tried system restore and image recovery, those failed too. Even resetting my pc has failed. I have tried cmd commands, and those also failed. I have upgraded to windows 10 via online from Windows 7, and I do not have a disk or another computer to work with. Nothing has even caused this issue. I just booted my pc like any other day and I was sent into this loop. I have a Gigabyte USB 3.0 powered motherboard.
So I thought I'd try out free version of Avast. Well, after few weeks of getting rocked by popups, I uninstalled it(from programs and features) and rebooted it, thinking life is good now. Hell naw it ain't good now, not at all.
I'm stuck in Automatic Repair loop. Windows attempts to auto repair, tells me my PC didn't start properly, does not boot to safe mode, does not find any restore points, fails to "Startup Repair" and is unable to "Reset this PC"
In command prompt that I can open in that cute lil blue metro interface I get following:
1. Disks are there and volumes are healthy(tho volume letters are wrong my os SSD is D: and storage HDD is C: ) 2. sfc /scannow tells me that there is a system repair pending which requires reboot blah blah fml 3. dism ran against D: with /Cleanup-Image /RestoreHealth fails with logs containing few errors(among tons of info logs): *Error creating registry mapping:COMPONENTS - CIfflineRegistry::Init *Failed to mount the remote registry *Failed to set the windows directory to 'D:Windows' 4. dism ran with /revertpendingactions gives me same errors in logs as above
that's pretty much it. So is my registry completely screwed?
Firstly, I can't generate the dumpfile as I can't access windows at all. I can't access it through any boot options including safe mode.
I've recently upgraded from Windows 7 to 10 through the microsoft updater.
The only major thing I did before this happened was installing the AMD CCC and rebooting, which caused this loop. I actually reinstalled it as switchable graphics wasn't working.
Things I've tried - 1. Automatic Repair - doesn't work. txt file in srt folder says the OS version is not compatible even if I use the Windows 10 usb.
2. chkdsk /f /r - it fixed a bunch of things, there seemed to be a lot of problems but now it says that there is no problems and no further action is required.
3. Fixing and rewriting bcd files - This was the interesting part because my computer some how changed the C: to D: and created a new C:. I've reassigned it so that original C: is renamed back to C: and removed the new C: partition which only had the boot files in it and reformed all the bcd files in original C:
4. I can't run sfc /scanow. It doesn't work with any commands I found over the internet.
5. Other things I found were that if I tried to reset the computer while keeping the files, it doesn't allow me to do it. Also, I found out that some of my drivers were missing by using devcon - graphics (both integrated intel, dedicated radeon m6740) some sound cards, single usb driver. Also when I installed thne integrated intel graphics driver through pnputil, when I restart the computer, the driver disappears and comes up with code 28 again.
I don't mind doing a fresh install but only if I am able to access my current hd files and create a backup, which hopefully should be possible because I can access the files through cmd prompt in WindowsRE.
I was running the Win 10 build 10074, in the slow ring. I left it unattended for update, which included the newer build 10130. Before leaving, it was at 99% downloaded. When I returned after 30 mins, it was stuck in an endless restart loop.
It restarts within 2 seconds of displaying the Windows logo, when I try to boot from the HDD. If it goes into Automatic Repair, it shows "Starting automatic repair" under the logo and restarts after some time.
But the worst thing is that the same problem occurs, Even if I try to run Windows 10 setup/repair from a USB drive!! (build 10130). It just reboots a few seconds after showing the logo, even when I removed the HDD. I am totally stuck. I am currently running Ubuntu from a USB drive, which is working just fine.
I am not sure what happened in my absence, though it's unlikely that the newer build was installed in just half an hour. The only idea thing that I can think of and have not tried is to try running an earlier build or version from the USB drive.
Win 7 user here, wanting to dual boot with Windows 10 preview (on a different partition).
So I made a Win 10 usb boot disc, and it installed it fine. Played around with the new Windows for a few mins, whilst it downloaded an update, and after installing the update, it said it needs to restart, naturally. So I did.
However, since then, the PC keeps restarting, showing a Windows 10 logo, and below that is the text, "preparing automatic repair". Then it just resets, and goes in this endless loop.
I've been having problems recently with my laptop (Samsung 7 series) freezing. I then get a pop up saying "windows has stopped working", and it either unfreeze after a few minutes or I need to force close it.
This happened again yesterday, and wouldn't unfreeze so I force turned it off. Upon restarting, I got a BSOD with the message "critical_process_died", and the laptop restarted itself, only to BSOD again. Now when I turn it on it goes straight into disk repair for C:, saying it is scanning for and repairing errors. However, even after running overnight it never progressed beyond 9% on this, and now I cannot exit the loop without force closing the laptop - but when I reboot it goes straight back into disk checking.
A recent AVG scan was clean, and I cannot recall an update that happened yesterday. Unfortunately. Unfortunately I cannot load up the laptop to even check anything. Hopefully this is a software issue and I can get it fixed at a tech store, but I'm worried it could be a hardware problem (Internet suggested there was some memory corruption?).
During startup automatic repair launches, restart ensues, that's the loop. The error mssg is WDF violation which it seems is related to iTunes. I just can't get out of this loop to do anything about it. I don't have a boot disc. Safe mode is what I would like, but that doesn't work.
OS - Windows 10 (64 Bit) RAM - 8gb CPU - Intel Core i5 3.3Ghz Vid Card - Nvidia GeForce GTX 570
Yesterday I had deleted a Word document by mistake, so I used System Restore to try and get it back. System Restore told me NOT to turn off the PC whilst it was running, and next thing I know after it got halfway through my PC blue screened and I had to restart. Now every time I load up the PC it does the following...
It loads up to the Windows 10 icon > After a few seconds it says 'Your PC ran into a problem and needs to restart' with the error code 0xc000021a > It then restarts itself but THIS time it tries to start Windows Automatic Repair instead > It then says 'Automatic Repair couldn't repair your PC', and gives me the option to click Restart or Advanced Options. This is where I'm having the most trouble, as the mouse and keyboard don't seem to be working at all on this screen so I can't even click any of the options. It's like the screen has frozen/crashed > The only way off this is to then force a restart using the power button on the PC.
The above just keeps carrying on in a loop every time I turn on the PC now. I still have access to the BIOS where my mouse and keyboard DO work.
I ran the window 10 installation last night on my Lenovo Y50 laptop. Today it is stuck in an endless loop of trying to Preparing Automatic Repair, diagnosing PCs and wanting to restart. I can't get past the limited choice of options to actually do anything useful. I just want to get rid of the thing and go back to Window 8. I am to computer stupid to know how do this. I only recently got the laptop. I don't have a recovery disk.
I upgraded to Win10 about a month agn Friday my pc was stuck in the Automatic Repair Loop. I tried alt+ctrl+del no result. I reboot and pressed F10 the monitor went to sleep mode. When I pressed the on button on the monitor, the Monitor Status reads as follows:
DVI: No signal VGA: No signal Auto Switch Source: on Default Source: DVI
At a point in time, a msg appeared saying "check video cable" so I used the VGA cable on two different ports no success. I bought a DVI-D cable and used it still the monitor is in sleep mode
