My network icon has a Red cross on it and says no connections are available . I have a toshiba satellite. and my windows 10 was working fine.I used to hook up no problem.
I went to settings and open network and internet, I fond no wifi section in it.
I have a Lenovo IdeaPad S10-3, it was upgraded from Windows 7 Starter to Windows 10 early august. Working find everything until updating to version 1511 in november, after rebooting with the new version the WiFi appears disconnected, it only shows airplane mode and I can only connect to internet by cable. I have tried changing drivers, disconnecting and reconnecting wireless, even going back to former Windows 10 version, etc. but no way. WiFi appears with a red cross!. Why WiFi worked so fine in the former version and why it´s disconnected in the new version?.
View 14 RepliesWhat these Windows system connections were for? Just want to know so I can decide whether to block the destinations, or executables in my firewall.They occurred while I was logged in, but not running anything yet. There are other connections, but I've listed these ones because they seem to be new to Windows 10.
Name: SIH Client
Version: 10.0.10240.16384
File Path: C:WindowsSystem32SIHClient.exe
Connection Origin: local initiated
Protocol: TCP
Local Address: EDITEDOUT
Local Port: 49487
[code]....
Windows 10 upgrade results in the Network Center not showing any network connections. The troubleshooting wizard does not detect the issue or rectify it. There are a lot of reports on the web supposedly related to pre-installed Cisco VPN or other VPN software.
The downside is that without this feature, crown jewels... Cortana and Edge do not work.
So originally I upgraded my mini PCI card and was trying to get that working... It was recognized in the device manager but not the network connections.. I could not see the adapter to use or enable/disable etc despite having the drivers up to date. Now I have my old card back in and now have the same issue with it! It is present without a problem and with the newest drivers in network connections... But I can't use it, can't see it anywhere else! I try to create a new connection in network connections and it does not give me wireless as an option.Running Windows 10 64bit on a Sony VAIO SVT151A11u laptop.The old wireless card that is reinstalled is an Atheros AR9485WB-EG.
View 1 RepliesI need a program which will show all the incoming and outgoing connections of the system from various process. The program should be able to point out the incoming weblinks as well to any programs in order to trace them back via web browser.
Or in other ways, an app to know from which links the other programs and downloading their files in order to trace them back and download them directly with a download manager.
An Advanced TCP View which shows full address of files.
I have a pocket Wifi Device, however, it is NOT using Wifi connection, as I have it connected to my PC using an USB Cable. Every morning I turn on my PC, it creates a new network connection, for example "Network 7"
How do I remove Network 1 to 6, and where are they located?
And how do I stop it from happening, as it seems it will keep going to Network 8, then Network 9 and so on.
Ok so got a new usb WiFi adapter. I installed the driver first which I downloaded on my phone then transferred to my pc via usb cable. Have tried reinstalling multiple times, still won't work. I'm guessing the problem is there's no win 10 drivers for it. NOTE: I did have a old usb adapter working with no driver before but not even that's working even with drivers uninstalled. The new adapter shows up in device manager with a problem indicated with a code 10.But not in network devices.
View 1 RepliesMy assistant in the other room accidentally unplugged the router and I lost connection. I told her to plug back in. I clicked the correct connection when it appeared, but I did it too soon. From that point on, when I clicked the systray icon, nothing happened...no display of available connections. Over and over I tried clicking the systray icon and no window popped up to show available connections. If I hovered over the icon, it did say connections available..
Then I right-clicked and went into the Network & Sharing Center. I could never find where it showed available connections like in Windows 7.
Finally, I had to reboot and I had my connection back.
If this happens again, where can I find available connections so I don't have to reboot? Or even better, is there a way to get the systray icon to again be responsive?
I have a fresh install on my PC and for some reason it doesn't detect my headphones, I've plugged them in the front and rear and still no luck, all drivers and software are up to date, They did use to work before the fresh install.
View 6 RepliesNetwork and Sharing is the only plce I can see the list of detected networks. How do I get the the icon on the taskbar?
View 7 RepliesAfter I updated to the latest Windows 10 "upgrade" (Build 1511, 10586) released yesterday thru Windows Update, my system shows only the Wi-Fi icon on Taskbar instead of the Ethernet Network icon which it used to display earlier. I have a wired broadband connection, and keep my Wi-Fi Adapter settings "Disabled". Yet, the icon shows the Aeroplane mode of Wi-Fi icon on Taskbar, instead of the Network icon it used to display before this update. At times my wired BB connection tends to become unstable, so I need to keep track if the connection is down, before I do some critical activity on Internet, like large download (which I may be unable to Resume), or Netbanking or online shopping, etc. How do I get the Network icon instead of the Wi-Fi icon on the Taskbar in the new Build 1511 ?
View 9 RepliesI got a new IBM Lenovo about a month ago that was running Windows 8.1. Before doing anything I immediately upgraded it Windows 10. When I hover over the network icon it says "Not Connected-Connections Available." The thing about it is, is that I am connected to the network and the Internet. I did update the network card driver today. I thought that would solve the problem, but I'm at a loss. It wasn't really a big deal until I wanted to connect to twitter and the weather apps that pop up when you click the Windows button in the lower left corner.
View 3 RepliesWith no changes to my computer, the network icon has vanished from the notification area. ...When in settings, notification/quick actions, I am unable to turn on the Network Icon (the option is greyed out)?
View 1 RepliesIn my Windows 10 Mail, a cross-in-circle symbol suddenly appeared?
What is this means and how to solve and remove this?
Last night I bit the bullet again & upgraded to windows 10 & then did a clean install. I have noticed that the network icon in the system tray shows a yellow triangle & says no access but I can surf fine with chrome & use qbitorrent etc.
The only way I can get rid of the yellow triangle is to disable the network adapter & then re enable it.
Not using any third party firewall as private fireall doesn't support windows 10.
My laptop pulled down the latest Technology Preview a few days ago and now my Wi-Fi is totally messed up. I cannot even open the network settings from the task bar icon.
View 1 RepliesI am unable to access the windows store but i can connect to the internet with nearly everything else...
Not a massive issue as I don't use the store much but it is quite annoying as it only happens sometimes.
I believe all my drivers are up to date... the MOBO is a asus b85m-itx..
So basically I installed windows 10 3 weeks ago.Its been working perfectly fine until I got this problem today.when I click on the wifi at the bottom right.it tells me no connections are available,I tried re booting my desktop,uninstalling and reinstalling the network drivers but nothing works.the weird thing is that it says the drivers are working properly but yet it won't let me connect.also my network adapter settings folder is empty.
View 5 RepliesI'll have connections available on my computer (Windows 10 Home 64-Bit HP) but whenever I click the connection menu, they don't show up, which means I have to reset the modem, wait the 15 minutes it takes, and then the connections FINALLY show up. Once I'm connected however, if I click the menu again, the connections wont show up. The image I've connected shows what I'm talking about. I can wait for a long time and connections still don't show up. I was wondering if there's a way to troubleshoot this without resetting the modem every time I want to use my computer.
View 2 RepliesIs Remote Desktop only available on Windows 10 PRO? I have Win10 Home and the option to "Allow remote connections to this computer" is not present.
View 4 RepliesI upgraded to Windows 10 from 7 a few months ago, but unlike other users with this problem, my wifi started working perfectly fine. This was still the case this morning, but after I came out the shower, suddenly all my wifi connections were lost. It's a similar situation to that described here: [URL] ...., except obviously it didn't occur right after the upgrade. It's annoying that I missed exactly what happened, but oh well.
I have tried seemingly everything, including endless restarts and resetting the router, and I know it's definitely not a problem with the wifi since I'm typing this on another device on exactly the same network. One of the solutions I found was to go to the Power Management tab in configurations of the wireless device, and uncheck "allow the computer to turn this off to save power" - I found it was checked, so I unchecked it, but it still hasn't made any difference.
Initially, the wifi icon changed to an unplugged symbol with a yellow exclamation mark, but after uninstalling Hamachi, it's changed to the usual icon you get when wifi connections are available (wifi symbol with asterisk). However, the problem's been exactly the same. I have a Dell Studio 1555, which admittedly is quite an old machine, but it was fine until now.
I have a new HP laptop win 10 installed and I like it very much but I have an issues with One Drive .
I use my WiFi connection at home for browsing and usual stuff which is fine and One Drive uploads to the cloud with no issues and of course does not affect my data allowance as my Internet connection is unlimited.
In my workplace I do not have a land line and use a talkTalk MiFi dongle with a 5gb limit . I connected to the MiFi and carried on as normal but realised that the One Drive used my data quickly and soon I had a message that I had no data left .
My enquiry is can I get One Drive to ignore my MiFi connection and only do the uploads on my home internet connection only ?
I installed Oracle's virtualbox on a windows 10 machine. I'd like to download software to it like adobe reader. I can't. I can start up internet explorer and connect to the web and if I click on links it goes to those links. If I try to go to google.com I get a message that it can't make a secure connection. I tried downloading adobe acrobat in windows 10 and transferring it with a shared folder to the virtual machine. I was able to transfer to the virtual machine but when I tried running it, it tried to connect to the web and could not. This looks to me like a security problem because the browser can connect to some sites in the virtual machine and only complained when they were secure sites. Is there some security setting in windows 10 that could be blocking virtualbox from connecting to secure sites?
View 4 RepliesI recently purchased an all in one HD PC which has windows 10 as its operating system. When trying to set up broadband connections and email accounts I have encountered problems. Technicians in both cases said there were probably corrupted files in the system. Another problem is the when the computer goes into sleep mode or is shut down the modem also switches off. I have been told by Telco technician that the modem is ok. It is only connected to PC by Ethernet cable.
View 8 RepliesMy Dell XPS 8900 worked perfectly fine for several hours, but now won't let me connect to the Internet. Another computer in the same room gets online without a problem, using the *same* internet cable.
I also get error messages on the Dell when trying to use system restore, and when trying to reset the computer. (I thought if I just started over it might fix it.)
There is an icon on the screen lower right of a little monitor, with red X over it. When I click that it tells me "no connections are available." I've unplugged and replugged everything (modem, router, computer) and nothing has worked. I have Windows 10. Anything I should do?