No Network - Cable Is Unplugged
Jul 30, 2015
I upgraded to windows 10 yesterday from windows 7. I noticed that my network isn't working. It says that cable is unplugged but my cable is fine. I tried different cables but s still the same problem . My internet worked fine yesterday( in my windows 7) . My drivers are up to date. My wifi works fine only internet isn't working. When I press troubleshot it says that cable is unplugged or your broadcom netxtreme gigbait adapter have problem with hardware or driver.
View 1 Replies
Similar Messages:
Oct 24, 2015
The other day I was connected to the internet via Ethernet cable I bought around 3 weeks ago and it was working well with no problems, but for the past two days when I plug in my ethernet cable, my laptop doesn't detect it and it says "Network cable unplugged".
View 1 Replies
Sep 18, 2015
2 days ago, I was happily enjoying my internet when suddenly my internet stopped working, I checked it and it showed that the ethernet cable is unplugged. I have by now, tried reinstalling win 10 (lost all my files and drivers ) and few more things like automatically searching for updates online. I have a realtek family controller
View 1 Replies
Sep 21, 2015
Win 10 32 bit will only load properly with Ethernet cable. Discovered this looping issue when I moved the PC and went to use Wi-Fi. Plug cable back in and everything goes back to normal. Troubleshooter doesn't find anything wrong.
View 8 Replies
Aug 21, 2015
I am periodically experiencing an issue where the o button starts typing itself continuously until I either restart or lock the PC. It's not a keyboard issue, since it happens whether the keyboard is plugged in or not, even with a different keyboard.
I haven't yet found a way of triggering it, but once it starts, it happens quite often after each time I stop it.
View 2 Replies
Mar 3, 2016
I have my laptop set to sleep when I close the lid. That works. But after the computer is sleeping and the optical mouse has shutdown (lamp off), if I simply unplug the power brick it will wake up again, the sleep light goes off and the mouse lamp comes back on and it starts running (lid closed).
View 2 Replies
Oct 24, 2015
I upgraded my laptop from Windows 7 to Windows 10 recently. The laptop battery is now draining 20% overnight when the laptop is shutdown and unplugged. With Windows 7 the battery drainage was negligible (even over a week). The laptop is a Lenovo Thinkpad Type 1143-3FU. The Thinkpad has a red light which glows while on. After shutdown it now flashes a few times after shutdown before stopping (rather than just going out) which indicates to me that something is still running, but I do not know what. The laptop battery is good. The computer does not appear to be hibernating because when I start the computer it shows the Lenovo screen first thing.
View 2 Replies
Jan 1, 2016
Last night I plugged in headphones to the small round jack (not the USB) and sound worked fine as Iistened to a program. When I unplugged the headphones, I cannot get any sound to come out of the computer. I've tried restarting, muting/un-muting, and I've looked at all audio settings I can find. I cannot locate headphones settings - they don't show up anywhere. I recently installed the Windows 10 update a couple of weeks ago and this is the first time I've used headphones in this jack. Wondering if I need updated drivers but can't locate and system says drivers are fine.
View 17 Replies
Jan 31, 2016
I recently updated my HP ENVY laptop from Windows 8.1 to Windows 10 & immediately started having issues with my WIFI speed. I was able to connect to the wireless network just fine with no limited connectivity, etc but the speed crawls. It's only my laptop...all other wifi devices are running with no noticeable difference. I went through a bunch of troubleshooting steps and couldn't get it to improve.
I was able to figure out my wifi speed is great when my laptop is connected to ac power, but immediately drops speed when unplugged. All of my initial troubleshooting was on battery power.
I checked the driver Power Management tab and unchecked the Allow the computer.... option. Also Control Panel-Power Options and changed the Wireless Adapter Settings to be on Maximum Performance for both On Battery & Plugged In.
Realtek RTL8188EE 802.11 bgn Wi-Fi Adapter with updated driver.
View 1 Replies
Aug 18, 2015
i just built my pc and installed a fresh windows 10, i tried to connect ethernet cable to my pc but win 10 still cant detect the cable.
View 1 Replies
Jul 31, 2015
My acer notebook after upgrade from win8.1 to win10, my ethernet port keep disconnected and sometimes cant detect cable till i restart ny notebook. reinstall driver still same..
View 1 Replies
Mar 16, 2016
A couple days ago I noticed that instead of having the ethernet in my taskbar that it is connected to wifi. I dont understand that because I have been using hardwire forever. To top it off my xbox connects via ethernet, but my pc wont. have tried the same cable that connects my xbox. I am pretty sure this is causing serious game lag, and i dont know what to do at this point. i cant access my router settings either. i type 192.168.1.1 and it doesnt load. that is the same ip address that i have always used before.
So this solution did work in a sense. Once reinstalled my drivers, my computer did detect that there was a ethernet plugged in, but it said the there was no connection. I disabled wifi on the computer, so it can only connect to ethernet. even tho it says that there is not internet connection through ethernet, everything is working great. It permanently has the Caution symbol over my internet.
View 1 Replies
Oct 4, 2015
My problem is i use a hardline into my computer and upon starting it up yesterday was greeted with the problem “no ethernet cable installed or connected”. I have replaced the cable already/restarted both the computer and router multiple times/did a system restore and none of those worked. Also disabled and re enabled the adapter multiple times.
The only thing that seemed to work or hint at the problem was a windows 8 forum that said to use an elevated command prompt to do “sfc/scannow” and that came back with errors. There was a “DSIM” command that was unable to find a correct download location.
View 1 Replies
Oct 14, 2015
So I've built my first ever PC and I chose the ASUS Z170-A as motherboard. When I was finished I installed Ubuntu. The ASUS motherboard do not have wifi compatibility integrated so I used the ethernet cable to connect to internet. That worked just fine, everything worked very smoothly. Then I decided to install Windows 10 instead. I bought the Windows 10 Pro, wiped out all the Ubuntu reserved partitions on the SSD disk, and install Windows.
But now, while having the ethernet cable inserted to the motherboard, it wont recognize it. The green and orange lights next to the ethernet cable input are even turned on (indicating that the PC does have a connection). But still the OS wont recognize that it is there. So even when Ubuntu succeeded to recognize the cable, Windows 10 din not. I speculated that I need some kind of software to detect the cable, but I am probably wrong.
View 1 Replies
Jul 29, 2015
Per the title, I run my computer through my TV using an HDMI cable. Sound works brilliantly on Windows 8.1 but after upgrading to Windows 10, I'm left without audio, and in the sound settings it doesn't show HDMI as an available device.
View 2 Replies
Aug 31, 2015
I'm sure there's enough variables that this could be some combo of software and stuff I have (I never use OneDrive - close it? I use Dashlane - it had Win10 issues, later resolved.) -- but does anyone walk away from their PC, come back and find online (cable modem/Ethernet in my case) - just stops working, in everything? Evernote, Firefox, Outlook, etc.?) Programs are fine (well, Outlook freezes in mid send/receive but...) but the online access is gone? And the only fix usually is a reboot?
Never happened in Win 8.1. Happens about once a day in Win10. Reboot fixes. Network troubleshooter finds nothing. If it didn't come back after reboot I'd be desperate, as it is ... I can live with it if I have to but... was hoping one of these "cumulative updates" would work but... doesn't seem to happen when I'm working, only if I stop a bit. Got a clue that doesn't involve powershell "fun" or registry/deep file mucking?
View 1 Replies
Dec 10, 2015
Windows 10 plays Mp3 Files just fine. Connect an HDMI cable to the video output port, and then windows 10 suddenly wont play those files. An error message pops us inside windows media player and Grove that this file type is not supported. Also no sound is played through the HDMI Cable to my TV, and no sound is played when i click the volume bar on the bottom right side.
I work for an integration company. We just installed a couple of conference rooms for a company in which we have an HDMI cable running from the table through the floor in the walls and to the TV. From there it breaks out into the Amplifier and plays audio in the room. Normally i bring my Mac book pro for testing but i purchased this Windows 10 computer as a test device. I did not have a second laptop with me to test this out.
However, With the computer and the HDMI cable i am getting video to the TV. When i enter my TV menu and arrow around the menu option my sound works on the built in speakers in the room. So i can confirm that the cabling is all correct. This is the identical setup that we always use. I have also plugged my Iphone into the cabling behind the TV and played music which worked perfectly fine.
The computer, as i mentioned, would play MP3 files perfectly fine, untill i plugged in the HDMI cable. Infact i can be playing and MP3 file and then plug in the hdmi cable and suddenly the computer stops playing the MP3 file and gives me the error that windows can not support this file type. Those same MP3's play on an SDCard in the TV when i access them directly from the tv. So those files are not bad. Also anything with audio fails to play anywhere (tv or locally on the laptop) when the HDMI is plugged in.
Also i have gone to the control panel and selected the Audio section and looked at the video card / audio output selections. When i have no HDMI cable selected the option for audio output changes to the internal sound card. (which is correct) and then i plug in the HDMI Cable and the audio switches to the HDMI output (which is correct)
the only two conclusions i can come up with are this particular computer has a bad video card. or windows 10 is not supporting audio output. I have never tested our setups with windows 10 before.
Last bit i'll include this is a brand new computer. Core i5 8Gb ram 1tb hard drive. its a toshiba.
View 2 Replies
Feb 10, 2016
Where to start so to begin with my issues started when we got a new router. We had issues with the old one so we installed a new router and got it working fine WiFi worked alright but Ethernet would not connect it my computer when I ran the troubleshooter said one or more network Protocols were missing from my computer I'm running windows 10 version 1511. I went on google on my laptop to start finding a fix and I must have tried every option in the book just about I am losing my mind over how to fix this. Finally I tried reinstalling the Network drive Uninstalling my current one going on google finding my most updated one ect. and now the issue is no longer about the protocols but its saying my Ethernet doesn't have a valid IP configuration
View 2 Replies
Oct 28, 2015
I have a laptop. Acer e5-571g to be precise. So, i had a problem with an hdmi cable to tv - had no sound. Did a bit of research, tried some things out, nothing. Unplugged the cable and my screen icons went large, screen is blurry now. Drivers, i think, are up to date. Screen resolution is not the problem, icons are set to small. Restarted the computer too. Oh, and i have windows 10.
View 1 Replies
Aug 30, 2015
My HDMI Cable is not working on my Asus Notebook after I did the Windows 10 update. I have tried fixing the sound and resolution on control panel, i also made sure all updates and installation of apps are up to date, however, the TV doesn't seem to recognize the cable anymore, or the computer.
Tried changing the settings on the TV as suggested on one of these forums. I must be missing something.
View 1 Replies
Nov 12, 2015
I have been unable to do a direct cable connect. Settings are not available. In settings, to do a cable connect it asks for a name and ISP. There isn't any. I never had a problem doing this before and I can do it with my apple computer. It has now been 2 days trying to figure out how to do what should be the easiest connection. No problem with any wireless----not everyone has wireless! Your microsoft stores have a long way to go to match the apple stores. If you can't get a connection to the internet it is very difficult to communicate or download any patches.
View 6 Replies
Aug 16, 2015
My computer wont connect to the internet via ethernet cable. It works when the cable is directly connected to the modem, but when I run the cable into the wall output it wont connect. Ive tested that there actually is internet through the cable in the wall by connecting it to my Macbook, and it works perfectly. what can I do to fix this?
View 1 Replies
Nov 23, 2015
I got a problem with USB cable. When I plug it in there is no action from system side. It should at least give me a message like"Unknown Device" but there is NO such message. I don't see it also in device manager...
I've checked same cable on different laptop (Windows 7) and it shows as "Unknown Device".
Scan for hardware changes also dont work for it...
- how to debug it? I've tried Microsoft and Intel drivers but with no luck
I am using Windows 10 - Intel 6 Series / C200 Series Chipset Family USB Enhanced Host Controller - 1C2D & 1C26 USB Drivers
View 7 Replies
Jan 14, 2016
Whenever I connect my laptop to the TV via hdmi cable my desktop icons are moved and auto aligned in vertical columns down the left hand side of the page (my desktop). I have to drag them back to where I want each time. It's a fairly minor nuisance, but is there any way to avoid this, I've searched but can't find a definitive answer.
(I've tried, right clicking and unchecking 'align icons to grid' but that doesn't make any difference, it still always happens).
View 9 Replies
Mar 5, 2016
Error code 0x80070035
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them. My plan is to make one of them the home's backup and main storage system. the problem is that I can only seem to get one of them to actually communicate equally. Computer 1 is a factory Lenovo Intel i3 computer. Computer 2 is a home made AMD that I just built a few weeks ago.
Both are running Win 10 Pro.
Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer. But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
Computer 2. I am also able to see the computer listed under Network in the left panel. When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo (Computer1) Error code 0x80070035
I've tried the Diagnose option and it doesn't work.
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list. If I click on a file, I get the error. Example on the left side panel on my AMD computer I select:
>AMD
>C:
>PerfLogs
It's at this point that I get the error: Windows cannot access amdcPerfLogs as an example
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other. I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.
View 1 Replies
Oct 1, 2015
How do I find my network DVR in Network and sharing center?
View 4 Replies