No Operation Can Be Performed On Ethernet While It Has Its Media Disconnected
Jan 16, 2016
After upgrading to Windows 10 I'm getting internet problems. Most pages are very slow to load, I often get connection timeouts and lag in some games, despite the ping not being really that high. I thought it could be a browser issue so tried other ones but it didn't work. I've already updated all the drivers, have the latest BIOS and deactivated the P2P sharing of Windows Updates in local connection and applied all the updates that came up with Windows Updates. Oddly enough, Steam downloads and voice chat don't present any problem.
I've already tried the connection troubleshooter, to no avail, and also tried to renew the IP using instructions in a Tom's article:
1. Press Windows Key + X and select “Command Prompt (admin)”.
2. Type ipconfig /release and hit Enter.
3. Then type ipconfig /renew and hit Enter.
4. Type Exit and hit Enter."
But when I applied the commands I got the following message: "no operation can be performed on ethernet while it has its media disconnected" I'm connected using an Ethernet cable.
View 1 Replies
Similar Messages:
Mar 5, 2016
my Mouse, Keyboard and my audio interface get disabled a few times a day. at seemingly random intervals.
mouse and keyboard are mostly no problem because they reconnect instantly, with one exception today which forced me to restart as win10 refused to detect them again.
but most annoying is when it disconnects my audio interface because it never manages to reconnect without me manually pulling the usb plug out and in. some programs and game crashs when i do that, or just wouldnt play any sound without restarting the program in question.
i installed win10 a few weeks ago, its a clean install not an update. this problem hasnt occured ever before last week or something. so i suspect some auto-updates could have messed with it. i have not tinkered with usb drivers or anything like that,
View 6 Replies
Oct 1, 2015
I was working on my Qosmio x505 on my router as I have been for the past 5 years with no problems. This time the laptop randomly just disconnected from my WiFi and wouldn't reconnect! When I try to connect to the router it acts as if I have never once connected to it (asking me for the pass). Once I put the password it does its usual thing and then gives me the message that it cannot connect.
I should mention that my laptop connects to my Samsungs hotspot just fine. Also, all my other devices (2 in total) connect fine to my WiFi. I tried to disconnect them and then connect my laptop and it didn't work. I reinstalled the WiFi driver but it didn't work. I tried troubleshooting but when it asks me to look for available networks and I press the option it completely bypasses the step! I tried to restart the laptop and router, didn't work either. I got so desperate that I backed everything up on my external hard disk and did a total windows 10 reset. That didn't work either!
I am sure I am putting in the password correctly. Also, when I left-click on the WiFi it doesn't give me the option to "forget" the network.
Windows 10 has been working for me very well since it rolled out, I doubt that it is a problem with windows 10 but it may be.
View 1 Replies
Feb 15, 2016
Trying to install Microsoft Visual C++ - 2008, but I keep getting error 997.Overlapped I/O operation in progress.
I am on windows 10, 64 bit.
I need visual c++ 2008 for afterburner, as it wont run without it.
View 1 Replies
Jan 19, 2016
I am being bugged by a problem associated with USB ports apparently being intermittently disabled or disconnected.
The result is a cacophony of device disconnected sounds being played. It ultimately means the PC has to be shutdown. Occasionally a device connected sound will be heard as well.
I have heard that Win 10 is disabling or disconnecting USB ports to save power for tablets and such. Understandable for limited power availability but for PCs where power is always available this seems misguided.
I need to know if this is by design or can it be selected off via registry option.
View 3 Replies
Jan 10, 2016
I am getting numerous Device Disconnected sounds and occasionally Device Connected sounds.
I am trying to trace the source of these and started looking in the event logs.
There does not appear to be any events with Critical or Error tags showing.
Should the Device Disconnected event create a log entry?
If it does not can one be created to give me a clue as to what has been disconnected? Everything still appears to be working after a Device Disconnected sound is heard.
HW
M/b: ASUS P9X79LE
CPU: Intel i7-4930K 3.4GHz
RAM: 32GB
HDD: 2 x 2TB in RAID 1
HDD: 1 x 2TB
O/S
Windows 10 fresh install and updates to 10586.36
View 4 Replies
Jan 16, 2016
I am running Windows 10 Home version 1511 build 10586.63 on a Dell XPS L502X laptop. I have just bought a Bose SLIII bluetooth speaker. I can connect it up to the laptop no problem and it works well, however when I disconnect it I cannot reconnect them without removing the device and pairing it again. On my Android phone it is detected and automatically reconnects. Why I have to recreate the device each time I want to connect on the PC? If I do a Win+A then 'connect' and select the speaker device, it tries for a few seconds then I get a yellow message 'Couldn't connect'. When I remove the device and 'Pair' it again it connects immediately.
View 5 Replies
Dec 5, 2015
I have a Lenovo IdeaPad S10-3, it was upgraded from Windows 7 Starter to Windows 10 early august. Working find everything until updating to version 1511 in november, after rebooting with the new version the WiFi appears disconnected, it only shows airplane mode and I can only connect to internet by cable. I have tried changing drivers, disconnecting and reconnecting wireless, even going back to former Windows 10 version, etc. but no way. WiFi appears with a red cross!. Why WiFi worked so fine in the former version and why it´s disconnected in the new version?.
View 14 Replies
Oct 19, 2015
I have set up home network behind a router. every basic operations as folders sharing work but when I try from Windows 10 machine to join homegroup created from another computer running Windows 8.1 the operation is unsuccessful. The homegroup was firstly created on the Win8 machine. Same homegroup password is used same of course. Home group listener/provider services are started on both computers. Why is it not working?
View 2 Replies
Sep 1, 2015
Where have the Bluetooth phone operations and setting screen gone when I right click on my iPhone under devices and printers that option is not there which means I cannot show screen when phone rings or want to play audio files from my phone the option was there in windows 8.1
View 2 Replies
Aug 16, 2015
My windows photos is the default viewer. After downloading windows 10, I now cant open photos. I get a message the 'wait operation has timed out'.
View 3 Replies
Jan 16, 2016
I have an odd issue where a Samsung SSD that is no longer in my system is still showing. The weird thing is if I bring up the properties, and then populate the fields of the drive (by pressing the populate button), it shows the capacity of the newer drive which is double the size. This drive is not a Samsung drive though. So I'm not sure what's going on here - see picture where it clearly states (at the top) that I'm looking at the properties of a 250GB Samsung drive, but the populated fields show it to be a 480GB drive.
View 17 Replies
Feb 23, 2016
I have win 10 64-bit home on a 4th gen core -i5 laptop. I have a WDC 1T 2.5" USB3 drive. It is about half full. It used to do 60-70MB/s write speed. Since a few days ago, I noticed it has slowed down by a factor of 5-6 to 10-20MB/s. While copying large files, I watched what's going go. The System and compressed memory process was doing a lot of read and write on the disk. If the copy speed reported by the dialog is say 15MB/s, then system compressed memory process is reading 15MB/s and writing 30MB/s. It looks like this process is reading back the content written and writes back. It is consistent over reboot with several large files from 200MB to 7GB in size.
A couple of weeks ago I did a file backup. I created a 5GB virtual drive on my SSD and dumped all files to be backed up. Took only 5 minutes to copy the 5GB files to the virtual drive and copy the file to the WDC disk, at around 67MB/s, typical of this type of portable drives. While I was wondering what was going on, I tested the same files with a USB3 dock and a 2TB Seagate drive. Write speed is about 150MB/s. So I thought it was not a problem with all disks. The WDC drive has no compress to save space option, BTW. I wonder what's going on. I have AVG antivirus and I turned it off while copying and same slow 15MB/s speed.
View 2 Replies
Dec 19, 2015
I was performing a File Cleanup operation and it included something call Windows Defender. I always click to delete everything it displays. So I did and it deleted Windows Defender. I have since learned what it is and want to reinstall. I do not understand why Microsoft would allow you to delete a part of the system from the file cleanup screen? But it did. How can I reinstall?
View 2 Replies
Nov 11, 2015
I've got some new photos in my laptop recently and yesterday I was able to open any of them. I did it for the entire day. From this morning I suddenly can't open any photo. When I click on one of them it says ''the wait operation timed out'' after 10 seconds. I really need to open some photos. What can I do and why did this happen ? Also I can't open any music files as well.
View 1 Replies
Oct 20, 2015
The upgrade process seems to go on Ok, but, near the end I see this message:
"The drive where Windows is installed is locked. Unlock the drive and try again.
"Errors 0xC1900101-0x20017
"The installation failed in the SAFE_OS phase with an error during BOOT operation.
View 3 Replies
Feb 10, 2016
Recently I am notice Media Player is crashing while Groove cannot even find a single media file out of 100GB music. Audacious stupid Groove asks: "My dear please tell me where to search for your lovely music files?", but then turns over and goes to sleep. Very disappointing. Now I cannot play any music neither by Media Player nor Groove.
View 1 Replies
Nov 18, 2015
i recently updated to windows 10. I'm having some difficulties regarding internet through Ethernet on It. what usually happens is i am able to surf the Ethernet for around 10 minutes, then the ethernet adapter just quits on me. So i run the network trouble shooter and find you that it needs to reset the DNS, which it does successfully. After that my Ethernet doesn't work anymore till I restart the Laptop. my computer's wifi card is an intel wireless n 7260, and the other network adapter is a pcie gbe family controller.
View 2 Replies
Dec 30, 2015
So i recently updated to windows 10, and i noticed i wasn't connected to my Ethernet anymore, so i had to connect my PC to the wifi. Under my "network Adapters" it only shows "Qualcomm Atheros 802.11 1/b/g/n" I tried connecting another ethernet cable, but nothing happened.
View 1 Replies
Jan 11, 2016
I cannot seem to connect on Ethernet though Wi-Fi works OK. I have seen several articles about ethernet problems with Win10.
CABLING
First the network config:
Two notebooks, C and D are plugged into a switch and the switch plugged into the router. Now, the cabling is verified to work because computer C, running Win7 connects just fine and if the internet cables are swapped, computer C still connects just fine.
Computer D however does not connect. I did some other things to redundantly check too, just FYI.
So cabling looks OK.
ROUTER
both computers have fixed (reserved) IP addresses in the router.
The router sees computer C
but not computer D
Just FYI, if I turn on Wi-Fi, the router sees D on WiFi, but not the ethernet.
PING
Computer C can ping D
Computer D can ping C
Computer C can ping the router
Computer D cannot ping the router
Some investigation suggested the following, all of which I tried with no better results:
- Update the network adapter drivers (already current)
- Winsock posible culprit, so NETSH WINSOCK RESET and reboot - no change
IE used to find and fix these things pretty well, but here we have EDGE. Perhaps I'll try to install IE. Connectivity diagnostics are where IE shined over Chrome and Mozilla.
UPDATE: IE 9, 10, etc. are not compatible with Windows 10. So, the connectivity diagnostics just not as good in Win10. I can tell I am getting tired, as it's getting hard not to swear.
UPDATE: Added a pretty picture.
View 9 Replies
Aug 23, 2015
I was wondering if it's possible to utilize both WiFi and ethernet in tandem. I'm pretty sure some of you are going to tell me that I can only access the internet through one of these, up to my bandwidth limit, but that's not what I mean.
I'd like to access the internet through my WiFi connection, yet have a wired connection through my router to access the files on the other computers in my house.
View 1 Replies
Oct 16, 2015
I am using "Broadcom NetLink Gigabit Ethernet 15.6.0.14" on "Acer Aspire E1-571G" in Windows 10 OS.Since few days my internet connection is getting dropped when i troubbleshoot it fixes immediately showing "Problem Found-Default gateway is not available-Fixed" and starts working for 10 sec,1 min or sometimes 1 hr then again this problem.
Sometimes shows "Driver Power State Failure" error
My roomie has same laptop and same connection but no issues. And even if i disconnect the wire it keeps showing connected icon in taskbar. What I have tried already,
1.reset ip/tcp
2.Set ip adress manually.
3.Try to update driver from device manager says using best driver.
4.Reset my laptop.
5.Updated BIOS.
6.Unchecked "Allow the computer to turn off this device to save power" in device manager.
But problem still continues...
View 5 Replies
Aug 20, 2015
I was using free upgrade from windows 7. After installing Windows 10 on my laptop, I cannot connect with wifi but can with ethernet. What should I do?
View 1 Replies
Oct 29, 2015
I very recently built my own Gaming PC and just installed Windows 10 on it today (It never previously had any operating system installed on it), I tried using my WiFi card to connect to the internet but after learning that my card isn't compatible with windows 10 I resorted to using an Ethernet cable. Unfortunately, I still can't find nor connect to an internet source and the network icon in the bottom right is not appearing. I've tried rebooting the system several times with no luck.
View 1 Replies
Aug 2, 2015
I upgraded to windows 10 on my desktop pc on july 29th and haven't had any problems since. I know that upgrade/updates are forced to happen so when random issues occurred today I feel that maybe there was an update sent out? My ethernet no longer works, only to connect outside my LAN, but I can still remote desktop and access the computer so the port/cable still work and the router works for all other comps over ethernet. The internet goes in for a split second when I reset the adapter but then instantly goes out. I also noticed when launching a steam game the xbox controller no longer works to control it despite it working yesterday and the controller will control steam itself just not the games. Should I downgrade to windows 8.1 again, since I don't have internet anymore any fixes wouldn't even reach my computer?
View 1 Replies
Aug 18, 2015
i just built my pc and installed a fresh windows 10, i tried to connect ethernet cable to my pc but win 10 still cant detect the cable.
View 1 Replies
