No Restart After Upgrading - PC Stops During The Process
Aug 13, 2015
I'm having some hard times with my pc after installing windows 10...I used to have windows 8.1 and everything was fine. Since I downloaded 10:
-it's no more possible for me to restart my pc: it stops during the process.
-programs behave weirdly: adobe is going mad, it's no more possible to close skype when I don't need it, and other minor issues.
Now, I tried to go back to Windows8.1, I tried to reset the pc, BUT OF COURSE I CAN'T BECAUSE THE RESTART OPTION DOESN'T WORK!!! I want my old OS back...
I upgraded to Windows 10 from 7. Since the update I've run into an issue where, after I've been using my computer for a while and have done a few sleep/wake cycles, I won't be able to put my computer to sleep with the physical power button. It wakes up just fine with the power button. Restarting my computer temporarily resolves the issue.
I encountered a problem multiple times now on Win10. The issue is that sometimes a game will stop responding, the real problem is that by then i can not alt+tab. The window keeps overlapping everything else, so i have to restart my PC everytime it happens.
I have been having an issue where either playing a game or just watching youtube sound just stops and I have to restart the service and then it works again. It doesn't say its not running or that is crashed it just stops working but still "runs"?
I have a Lenovo laptop with windows 8.1 pro. I upgraded to windows 10 pro. After a successful install I checked the desktop, All is fine. Then I rebooted the laptop and received a critical process died error (Blue screen) It occurs after I enter my user name and password. Then it crashes.
I have been able to go back to windows 8.1 and removed any 'questionable" software. i then re-installed windows 10 pro (Same error) This has happened 4 times. The laptop always crashes when signing onto windows 10.
I did my upgrade quite shortly ago.Basically before that upgrade I had 2 connections at the same time: Local Area Connection with Ethernet and my PPPOE connection as advised by my provider.I've been using my PPPOE connection for years to sidestep some connection issues especially with uPnP, but now my internet only works through Ethernet and when I also start in my dial-up section the PPPOE connection, Windows 10 reports the "no internet connection" problem.After using "Troubleshoot problems" it resets the required parts and reports solving "Gateway is not available" problem.
1)I've already tried to reinstall all network drivers by deleting them first with device manager and through netcfg d in command line. 2)I don't know if it works but my BitDefender reports new adapters upon starting PPPOE: Teredo Tunneling and 6to4 3)I already tried to set Local Area Connection to Home and my other connection to Public and also all other possible permutations of settings
I'm having some hard times with my pc after installing windows 10...I used to have windows 8.1 and everything was fine. Since I downloaded 10:
-it's no more possible for me to restart my pc: it stops during the process. -programs behave weirdly: adobe is going mad, it's no more possible to close skype when I don't need it, and other minor issues.
Now, I tried to go back to Windows8.1, I tried to reset the pc, BUT OF COURSE I CAN'T BECAUSE THE RESTART OPTION DOESN'T WORK!!!
I'm having some hard times with my pc after installing windows 10...I used to have windows 8.1 and everything was fine. Since I downloaded 10:
-it's no more possible for me to restart my pc: it stops during the process. -programs behave weirdly: adobe is going mad, it's no more possible to close skype when I don't need it, and other minor issues.
Now, I tried to go back to Windows8.1, I tried to reset the pc, BUT OF COURSE I CAN'T BECAUSE THE RESTART OPTION DOESN'T WORK!!!
I recently started trying out Windows 10. It's buggy and frustrating, but it's still in preview mode, so... That's expected.
Nothing was working when I installed build 10074 off disc, so I installed build 9926 off a disc (I got the iso from MSDNAA, I'm a programming student) then upgraded via settings to 10074.
During the upgrade, my laptop started resetting, normal. But halfway through, the resets stopped working.
The screen switches off, the cd drive switches off and the hdd activity light switches off, but the power stays on, and the fan keeps running. It also doesn't switch off on shutdown either.
I finally have a working version of Windows 10, minus Cortana and Spartan (I'm in Aus), but now my laptop won't shut down.
Could it be drivers? Is it OS interference? Is there a way to fix it without uninstalling and re installing Win 10? I really cbf going through all that again....
I have windows 8.1 installed on my laptop and when I try to upgrade to windows 10, it overheats, shuts down and when I restart it, goes back to windows 8.1.
My fans are clean and everything works just fine with the laptop, I don't understand why is this happening. I also have a friend with a similar laptop model who is having the same overheating problem when upgrading to windows 10 (in his case, from windows 7).
I upgraded to Windows 10 everything seems to run fine but system will not restart from the restart selection on the start menu. Windows update will not reboot automatically either. System looks like it is going to reboot, everything shuts down but as system trys to restart everything freezes. Only way around it is to do a hard shutdown by holding the power button. Updated graphics card,hard drive and bios but still no luck.
I am upgrading a computer from Windows 7 to Windows 10. I completed the download, and got a message that the computer needed to restart to continue the installation. However, when I restart and the computer comes back up, the same message appears and the installation does not progress. When I go to check Windows updates in the control panel, it says it can't check for updates because another installation is in progress. I have restarted the machine multiple times with no progress - can't go forward, can't go back.
I was using Windows 8.1 and after upgrading to 10 I get regular freezes and the computer just stops sometimes. I think this is normally just after booting up. Do I need to wait five minutes for it to get going before I try and do anything?! This is not normal, my PC was fast and responsive before the upgrade.
This update "Säkerhetsuppdatering för Internet Explorer Flash Player i Windows 10 Version 1511 för x64-baserade datorer (KB3119147)" (Swedish !!! but I bet You can guess my problem )stops att 95% when downloading. Have waited for hours.I have restarted several times but no diff result.
It all started when I installed Windows 10 on release day. (I was using windows 7 before). I downloaded mumble and then all my games and started playing with friends. After a while I noticed that my friends weren't responding to me I alt tabbed and realized my push to talk wasn't working (this goes for every voice program, the same thing happens the push to talk key stops working). In my Recording options the mic isn't disabled.When I go into recording devices after it stops working when I speak I do not see any green bars, when I go to steams voice test and nada, no green bars. To fix it I either go into Mumble settings and just hit 'apply' or I open up the mumble audio wizard and close it right away and my mic will work again along with push to talk. For some reason this makes my mic work again.
I've tried a fresh install of windows 10, I've tried different mics, different sound cards and the same thing keeps happening. Before I reformatted it got so bad it was happening every 2 minutes. Now it happens every couple of hours and progressively happening more often.To me it seems something is disabling my mic and doesn't re-enable it.
Occasionally my IE 11 Process will become suspended. When this happens I can still use the IE window I have open but many other things stop working correctly. I've attached a screen capture from Process Explorer to show you what it looks like. I've noticed several other processes becoming suspended such as ShellExperienceHost, Search and several others. Why they are becoming suspended. I'm running Windows 10x64 Pro on a Sager NP 7378, i7 4710 processor, 16 GB of RAM...
It has been a few days that, everytime i go to sleep or afk, the time stops and I have to set it back when I'm back !
For instance, yesterday i left at 0:12am and today the time was stuck at 00:50 or something like that. So what I did is go to time settings to uncheck then check again the "set automatically" button.
I don't know what to do, I already tried to completely reset my pc but it didn't change anything to that problem ..
So far I have enjoyed my new win 10. This morning the boot stops on the intro screen. this is where you touch any key & it goes on to the log on. No key works. I tried another keyboard & that didn't work.
I followed steps for installation on SSD with UEFI Everything went well until the first restart after installation files reached 100% When screen came back it was back to original Install now screen.
I had disabled secure boot in firmware as suggested. SSD is the only drive attached at present. Should I attempt a reinstallation or are there other steps I should pursue first.
I am using a retail licensed Windows 10 Pro version installed on USB using Microsoft creation media.
Dell 8700 XPS i7 4790 processor at 3.40 Ghz 16GB memory 2 TB HDD Windows 8.1 installed presently not connected Kingston HyperX 120GB
I am now getting a new error. The error i am now getting is error C1420127 windows 10 now installs almost but towards the end it stops and says error and then when i go to look at it that is what the error is.
I have a Dell 2305 running an AMD 64 bit processor.It originally ran Win 7.Randomly, I get an error message that the display driver stopped.When magnifier is running, its window goes black.It sometimes recovers...sometimes it crashes the system and goes into restart. AMD web site says its due to a timeout with no further way.
I recently purchased a new HP Pavilion 17" laptop with Windows 10 Home already installed. When I went online the automatic updates began. The download to upgrade to version 1511, 10586 started but stopped at 60%.
How do I get the download to finish the download?
Prior successful downloads and installations include:
Update for Windows 10 x64-based systems (KB3106932) and (KB3135174), Windows malicious software removal tool (KB890830). Security Adobe Flash player (KB3135782)
