Just bought an HP stream, it doesn't have enough memory for me to upgrade to windows 10.
I ordered a micro sd card online, should be here in two days. My two questions are:
Can you install windows 10 on a micro sd card? And if you can, how would I uninstall windows 8.1, and install the windows 10 onto the laptops hard drive?
Update: I know this sounds stupid but, I downloaded classic shell. I HATE windows 8 and thought the only solution was to upgrade to windows 10, but the shell seems to suffice. Thread closed.
I'm running a 64 bit Windows 10 laptop. On idle, the System process is showing a high memory usage of more than 150 MB, usually more than 200 MB. Using poolmon the pooltag SpDN showed up with a memory leak. It leads to the Intel Matrix Storage Manager driver, iaStorV.sys. How should I go about fixing the problem?
I have an HP DV4 Laptop(i5, 8GB RAM, 256GB SSD) that came with Windows 7, I recently updated to Win10. Everything seems fine except of the high CPU usage in System and Compressed memory. I narrowed it down to the Realtek Memory Card reader. I should also mention that right after the Win10 update two Realtek Memory Card Reader entries were in Device Manager with yellow exclamation icons.
I deleted them and had Windows install the drivers from Windows updates, after that everything LOOKS fine. And there's only one entry now.After a while I noticed the fan making a lot of noise, wasn't like that in Win7.Anyway, after hours of troubleshooting I eventually came back to the Realtek reader, sure enough after disabling it CPU went to normal.I have also downloaded the newest driver from realtek site.
I upgraded to Windows 10 about a month ago, aside from the learning a new system issues I haven't had many problems. I first noticed issues with accessing my secondary drive (URL...), then the programs started hanging up. Within the last week or so my computer's memory usage has been been at 98% and up. So much so that just switching from one program to another takes several seconds and opening a new program almost shuts down my computer.
i have recently installed win10 and after a few days i have noticed that it uses all my memory(8gb) in the following scenario:
i let the computer overnight watching a stream and an online radio station.the next morning i have noticed that the computer was a little bit laggy, ind i opened task manager where it showed 97% memory usage.The funny fact is if i added up alll the provcesses memory usage und it was about 1.2 gb ram
PC specs:
i7 - 4770k proc gtx 970 video 8 gb hyperX red memory
I have windows 10 64 bit, edition Windows 10 Pro, Version 1511, OS Build 10586.104
Processor : i5-4690k Ram (installed) : 16gb Video card : gtx 970 with 4gb vram.
Computer is slow at times lately. Memory Usage in task manager is constantly high when this occurs. Not many Operations are open and running. I am having fps drops while gaming as well that is annoying. Attached image of processes and percent of usage across cpu,memory, disk, and network currently ...
9:45 pm - Just tried to shutdown windows via task bar and windows cycle through shutting down, blink black scree, pc stayed on, windows popped back up. Hard shutup via pc case i/o button and windows still tried to cycle through shuttind down, blinking black screen, pc on still, and windows flicked back on and then shutoff completely.
I have an old VAIO Laptop-VPCEC4S0E, and I really wanna boost it. So it came with window 7 and I updated to window 10 on my hdd. Now the things I wanna do are as follows. The laptop is very slow, and there is nothing at all on it that i need. I need to destroy whatever is on it, and get it back to factory settings. Will that return it to window 7? I dnt know. On the other hand, I want to remove my hdd and replace it with an ssd.
Plus i wanna remove my old memories and put newer ones (6gb into 8gb).Should I start with restoring to factory settings (again not sure if it will be back to win7), then install window 10 on hdd, then clone it to the ssd, then swap the hdd with the ssd? is that the right order of doing these things. And I will fit the memory change with the hdd-ssd swap.In I wanna make my old laptop like a new purchased laptop with an SSD, new memory and a Window 10 on it.
Okay, Well windows 10 is giving me crap. I have two memory slots, 1 is being used. It tells me that i'm using, like 2.0 GB out of 1.6GB. What? I disabled page-file for much faster speed, and it worked. But i'm not even using 1GB in memory, even when i plus all the memory used together.
Btw i cannot turn page file back on, lags WAY to much. And this is a new hard drive.
I have a gaming computer and I can't even play games on it now. I updated to the most recent build of Windows 10, and started getting this issue. You can see my specs on my profile.
My computer reads that I have 6.00 GB RAM but only 3.37 GB is usable. I've seen that using x32 versions can cause this but I have yet to figure out why my x64 version is doing this.
My memory card is not being imported onto computer. I never had this problem before until I upgraded to Windows 10. I have to say overall I am very dissatisfied with this new version. Not the only issue, but this is important to me. My camera is a Canon 350HS Power Shot. I was able to upload prior to upgrading.
My memory usage is constantly at 97-99% memory usage, with "System and compressed memory" Having almost 4x amount of memory being used as the next program ....
I had like 10-20GB free, then it went down to 0. I didnt install any software. For now, it's goin slowly up, first 100MG, now 400MB, but i dont like that..
How can I disable cortona or uninstall it it is sucking a lot of memory when i look in the task manager processes I don't even use this I thought I disabled it but it still seems to be running.
I've got 8GB RAM and while I was playing XCOM 2 with no other apps running (except for what's running near the clock, AV, Firewall, Steam, etc) and awhile playing windows gave me an error stating that Windows is Low on Memory and it shut down XCOM 2.
(ntoskrnl.exe) Just started today. Since I've upgraded to Win 10 I've experienced all kinds of crashes, loss of audio, high memory usage and high CPU usage. :41 PM.
I see a lot of people talk about the system process and say it uses a large amount of ram when they aren't even doing anything, in my case it stays low except when I launch games.
For example I can run CSGO and system won't budge, then I can run League of Legends and itll jump to around 500-700mb or dayz where I've seen it jump to almost 2gb and dayz will actually go down in memory while system goes up. I also don't see any performance hits and when I close the game out it will shrink down to around 100mb.
My question is if this is supposed to be happening, I've found a fix in where I just disable Superfetch and system will never budge past 0.1mb. However I notice things like Skype will start using over 100mb where if superfetch was enabled it would sit at 35mb.
My laptop have an Intel HD 3000 integrated graphics processor. I have 2GB ram and i am planning to upgrade it to 8GB as my laptop supports upto 8GB( 4GB*2).Now I have only 64MB dedicated graphics memory and around 700 MB shared memory. I wish to know if I can increase my graphics shared or dedicated memory after increasing my RAM . My BIOS does not allow to do it . Is there any other method or any third party software??Is there any way in windows 10 to do this??
What services of svchost should I disable? I think it's eating up my memory. I think if the computer has 2GB RAM, it should have only like 30-40% usage but I have 63%
buy 2nd hand HP Elite book Folio 9470m at first when i buy i check the configuration of RAM it was 8 GB with 500 GB HDD then after a few days My laptop suddenly appears Bootable Disc Not Found i learned from Comp.Technician that my HDD have problem.He installed 1TB HDD and format then when i brought home and check RAM Cnfiguration it becomes 7.87 GB now I'm jumping to conclusion that the Comp.Tech.Change the RAM My question is this Normal? if it is normal any explanasion because it was flat 8GB then after he gets his hand on my laptop it becomes 7.87
