For some reason, my num lock is off by default. I looked up the solutions, and the ones I found said to turn it on at the login screen, then reboot. It remained on for the next boot, but after that, it was off again. So I tried changing the registry key under "InitialKeyboardIndicators" to "214783650", which was the other suggestion I found. Neither of these worked.
View 9 RepliesI recently upgraded to Windows 10 and I am having some issues.
First one is: When I click jpg, gif, or any image files that uses the photo viewer as a default viewer, photo viewer pops up twice, one with the file I selected and one with the collection screen. It only does this on the first view of a image file after reboot. Once it does this, it doesn't do it until I reboot.
Second one is: I use a PIN as my login password. The number lock on the log in screen doesn't work. I almost always have to press NUM Lock button in order to use the number key pad. I checked the BIOS setting and Num Lock is on.
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
After installing a 32 bit windows 10 from a USB by mistake I decided to upgrade to the 64 bit version. I have 3 hard drives, one of which is an ssd that I am trying to install the OS to. After downloading and setting up the media creation tool and creating a USB I restarted and boot form USB.
I followed the steps and deleted the existing windows 10 partitions on my dad and tried installing straight to the unallocated space. After the installation completed it restarted the installer, which is not what happened when I previously successfully install windows 10. I then changed the boit order to have my ssd first and rebooted, which gave me the Reboot and select proper boot device or insert boot media error.
Confused I loaded up the installed and there were correctly partitioned installs already on the ssd ( although one partition looked a little small). I tried reinstalling windows 10 with the same result over and over.
My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
since Win 10 whenever I need to restart my Windows after an update etc it always does so with key pad lock off whereas before on Win 7 it was always on, is there a fix for this as I am so used to just banging in numbers and then seeing it doesn't work, especially using a pin to log in with.
DJ Steve
I upgraded (free) from 7 to 10 a month ago and all is going well apart from the lock screen. Sometimes when I boot up I see the lock screen for the briefest moment before I get to the regular sign in screen. Win+L does not result in a Lock screen but the regular sign in screen (Blue window and bottom left options).
I have tried the NoLockScreen DWord registry option with no luck either. Both manually and as a 'reg' file insert. Lock screen is set on via settings and I can select Spotlight, background images and apps to show etc.
I do not have Gpedit.msc as I have the Home version of Win 10.
I changed the REGEDIT for InitialKeyboardIndicators to a value of 2 and it worked for about a week, but now, even though the value is still 2, the num lock is off after the computer starts up.
This is a brand new Toshiba computer: Toshiba Satellite C55-C5241 15.6 Inch Laptop (Intel Core i5, 8 GB, 1TB HDD, Black)
Windows 10. logitech K120 keyboard. How to set num lock to be on at startup. With win8.1 num lock was always on at startup
View 2 Repliesnum lock turns off at shut down
View 7 RepliesAs I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
View 4 RepliesAfter several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
I am going to start locking my PC instead of hibernating or switching my pc if I'm only leaving it to stand by for an hour or two (or less), however on my power options from start there is no option to lock it, I have attached the image of what I am presented with.
View 1 RepliesAfter upgrading to win 10 from win 7 HP the screen locks up for (approx 4 seconds) after every mouse click. i have just reinstalled win 7 and everything is fine again should i re-download? and can i make a bootable ISO from the ESD file to do a clean install?
View 1 RepliesWhenever I boot up the num lock is off. I would like for it to stay on. Is there a way to fix this?
View 9 RepliesI've been running Windows 10 myself for a few days. My girlfriend for a few weeks/months. We noticed a small something that is not much but is getting on the nerve after a while.
We lock our computer or put them to sleep and when trying to get from the lock screen to the login screen, nothing is happening. We wait a few moment and everything is fine. Here is a few cases...
I'm at the lock screen. Click the mouse or hit a key. Nothing. Try a few times and I get to the login screen.
Another case : From the lock screen, hit a key on the keyboard multiple time and nothing. Click the mouse once and it's ok.
Everything work fine after that and it's no big deal but whe having to do this game a few times each days it's start to get on the nerve. Sometimes it's fine and we get to the login screen right away.
In my case it's a brand new install and in the case of my girlfriend it's an upgrade from 8.1.
After upgrading my Windows 8.1 system to to Windows10 , when I restart or turn on my computer the numbers lock key is not turned on. This may sound trivial, but if I forget about it, my passwords won't work because many of the passwords contain numbers. Is there a way for me to keep the numbers lock key on when my computer restarts?
View 9 RepliesMy lock screen has a notification of a speech bubble with 99+ written next to it. I can't work out what it's referring to.
Please see the attachment:
What this is referring to or how I might be able to find out?
Recently i notice that i am not being presented with the lock screen initially before the login screen. I don't recall doing anything to bypass the lock screen. how to get the lock screen back?
View 7 RepliesThis issue has plagued me since I've transitioned to Windows 8 and up. The Lock Screen feature (primarily ctrl + w) gets in the way of using certain programs. I've tried a few methods, all of which either don't work or stopped working.
Registry Editor
Local Group Policy Editor
And Winaero Tweaker
Is there any other way to disable this feature? It's the only problem I have with this OS. As I've said before, one of the methods worked fine but I feel that an update might have nullified my changes.
since I installed windows 10, every time I power-OFF, the number lock closes. That did not happen with Windows 7. At first, I activated the Num Lock every time I booted. Now, even when the Num Lock light is ON, the number pad is inactive. I wish to have the Num lock ON at all times, like with Windows 7.
View 5 Repliessince installing Windows 10 for some reason the "numbers lock" does not function & I can't use the calculator
View 15 RepliesWhen I right click my desktop and go to personalization then click "lock screen" nothing happens and it freezes on background. I have to close out then start over to use other functions.
View 1 Replies