One Laptop Cannot Connect To Home Network When Others Can
Mar 20, 2016
I have a Dell Latitute E5530 laptop that won't connect to my secured home SSID. I have 2 other laptops connected to it wireless, plus phones, plus 2 TV's (via a Roku and a Chromecast). I thought there might be a limit to what I can connect (i.e., 5 devices), however I brought home a 2nd laptop from work and that connected with no issue while the Dell Latitude still cannot. I don't even get the option to type in the Password Key, it simply says "Cannot connect to the network". I'm able to connect to an unsecured network with this same machine, no problem. I've tried reset the network adapter, I'm just stumped at this as to why this computer won't connect.
I recently upgraded one of my laptops from Win7 Pro to Win10 Pro. Ever since then it has been taking a much longer time for the laptop to connect to either of my home networks (two different homes). This is with either WiFi or Ethernet.
When it was running Win7 it would connect to either home's network in a few seconds. Now it usually takes over a minute, as much as two minutes. Once it does connect everything works fine.
I have 2 desktops and 1 laptop at home. All 3 are joined in a homegroup, and all network and sharing settings are selected properly. All 3 computers have same windows accounts (passwords), same programs and same internet security.
The 3 computers show up in the network folder and can be accessed from any other computer.However access to the laptop is often denied, by error message 0x80070035 "network path not found"
From the laptop, each desktop is always accessible, no matter who is signed in.
From the desktops, the laptop is often not accessible (error message)
My laptop is indicating that it is connected to my home network and that it has internet access but when I go to the network center it says that it doesn't have any connections. Attaching an ethernet cable doesn't work (which was an earlier problem too) I already updated my drivers and ran the troubleshooter but it didn't work. I also restarted my router so I did most things I can. Side note: It happened really suddenly from one moment to the other...
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them. My plan is to make one of them the home's backup and main storage system. the problem is that I can only seem to get one of them to actually communicate equally. Computer 1 is a factory Lenovo Intel i3 computer. Computer 2 is a home made AMD that I just built a few weeks ago.
Both are running Win 10 Pro. Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer. But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
Computer 2. I am also able to see the computer listed under Network in the left panel. When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo (Computer1) Error code 0x80070035
I've tried the Diagnose option and it doesn't work.
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list. If I click on a file, I get the error. Example on the left side panel on my AMD computer I select:
>AMD >C: >PerfLogs
It's at this point that I get the error: Windows cannot access amdcPerfLogs as an example
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other. I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.
I was wondering if i can connect to my home network from anywhere. More specifically my place of education as i need it for work,Is it possible to connect to my Home Hub?
As stated in the subject line I can't connect my Windows 7 Pro system to a Windows 10 Home system via the network without a password being required. Strangely, I can connect from the Windows 7 Pro system to two other Windows 7 Home Premium systems on the same network without a password being required.
Also, all these systems (including the Windows 10 Home system) can connect to the Windows 7 Pro system without any password being required. How I can eliminate the requirement for a password to access the Windows 10 Home system from the Windows 7 Pro system? The Windows 10 Home system version number is 1511, build 10586.0.
Downloaded Windows 10 on my HP Pavillion Sleekbook 14 and was not able to connect to my home WiFi. Reinstalled 8.1 and all was back to normal. Is there a new network driver I should download?
My wife doesn't use a password to log on to her Windows 10 PC. Her user name is her email address when the "Enter Network Credentials" window pops up when access is attempted from other computers. Her email password does not work here. We don't know what password it might be expecting. We've run NETPLWIZ on her machine and cleared the "users must enter a user name and password" box. This has no effect.
I have a desktop and a laptop setup at home, I have recently upgraded both to Windows 10. Both were previously running Windows 7 Home Premium and could identify each other on the network and I could access files on either PC from one or the other at any time.With the upgrade to Windows 10 I am still able to see the other machine on the local network, but I am unable to access their folders and move files between machines. The error message I get is as follows.When I run the network diagnosis no errors are detected and it asks me if I want to explore other options.
The full error message is:I do have shared libraries available across both machines that are part of my homegroup, so I can access the video files in the hard drive of my desktop from my Laptop but only to play them - not to move them around.I suspect this is either a user validation issue, or a firewall issue and I'm not sure how to go about checking whether this is the case or not.
I run a business from home with four computers all running win 10. All was smooth and easy going until a recent round of updates where a couple of computers ended up changed from "home network "to "business network", leaving them unable to communicate with other computers on the network. When I found the problem on the first two computers it was easily solved by just changing them back and rebooting. Now the same problem has happened to all of them, but I'm unable to change it, in that every time I do, when I reboot it comes up saying its on a business network again.
I just installed (yesterday) the latest W10 update that installed Version 1511 (OS Build 10586.3) and my home network consisting of five W10 PC's has been "destroyed." I do not use Homegroup. Instead, I have always set up all the drives/folders as shared on all the computers. That worked just fine until now! For some reason only one of the PC's is detected by the other PC's on the network. However, all the drives that I had previously Mapped are OK. Is there some new magic setting that I have to change to get network discovery working again ...or... is MSFT forcing me to use Homegroup?
A little more information to add to my confusion. I was wrong above - two of the PC's are shown in the Network on all the PC's. One of the five PC's, which I use as a home server, runs 24-7. For some reason it has all the other PC's showing under Network and can access all the stuff on all the PC's!! I know it used to take Windows a few minutes to find all the PC's on the Network but... all the other PC's have been running for many hours and nothing changes.
Here is the setup that I have. I have a wireless network. I have two Toshiba laptops, one running Windows 7 and the other running Windows 10 and I have a printer.
I continually lose connection to the home network although I am still connected to the internet on both laptops. This happens about every 10 or 15 minutes. The only way I've found to re-establish the network connection is to reboot both of the laptops.
I live in a very rural area and only have one option for internet access. It is through the phone company and all they offer is one of those 3G data card things that looks like a little USB data stick. The signal at my house is terrible, in fact, there is only one corner of my house that has a signal and that is where I have my wireless router. It is two rooms away from my computers. But the distance doesn't seem to be a problem for internet connection.
I complained to the phone company about the terrible signal and the woman there suggested that I use my Samsung phone as a router. I took the chip out of the data stick and put it in the phone. And it does work much better than the little Zoom router that I had been using. I do not know anything about the settings in the phone. The lady showed me which buttons to push on the phone to turn the phone on so it can find the signal.
I would prefer to know what I can do to keep it connected but if that fails, then I need to know how to re-connect to the network without rebooting either one or both of the laptops.
Today, while having lunch at my favorite restaurant, I tried to connect to their WiFi network as I usually do. I got the following message:Checking network resources.And then, after a few seconds: Can't connect to this network. My obvious question is, why not? To begin with, was it something wrong with my computer, or something wrong with their network?
For example:
DHCP server did not respond DHCP server did not issue an IP addressStored password incorrect; enter new password: _________ WiFi adapter card not respondingInsufficient virtual memory
But no, none of that useful information was offered. How am I supposed to fix the problem?
My problem is when I typically save or open a file with the Windows file dialog on any Windows 10 machine, and I try to go to that machine through the network path //MyNAS/MyFiles, it initially gives me a cannot connect or find error.Is this due to the dialog not waking up the drives on the NAS? Something is obviously asleep here, and I usually end up opening Total Commander or Windows Explorer to "wake up" the connection and then everything works. I don't mind waiting, but I'd like the dialogs to hold tight until it connects, not give me not found or cannot connect.
it was working back on 10049 and then i updated to 10051 and it still was working fine. but recently i did a fresh install and now i can re add a network device
i have a "New" Nintendo 3ds and i cant setup the MicroSD management which requires you to add it as a network drive
like N3DS
in the network tab i can see it but when i click it it says
windows cannot access N3DS
error code 0x80070035 the network path was not found upon clicking troubleshooting the problem says the remote device or resource wont accept the connection..
I have 2 new PC's set up and running, connected to a NAS via a Switch. Internet is available via a router.
I need to be able to access folders on and from both machines. I have shared C: on both, given permissions on both (everyone = Full control)
I can see the relevant machines in the network section of Windows Explorer (master & backoffice). Sometimes I can see C: on the other machine but I can not connect to it. If I Double click I get "path not found" error ( 80070035 I think )..... masterc
If I type in using the IPaddress it connects and works fine.... 192.168.1.69c
It seems that once I've used the IPaddress method, it can sometimes use the name method ( But this is hit and miss )
I have just bought a new windows 10 machine. It finds my home WIFI but fails to connect with the message "Can't connect to this network".
I have tried all the obvious issues such as re-booting (every component). I have several windows 7 machines and have checked the configuration of the wireless adaptors and there is nothing different around security, or 802 protocol selected etc. I have tuned off IP version 6 after reading some forums but get the same error.
My router is provided is provided by SKY is:
Manufacturer Sagemcom Model Number F@ST2304 Firmware Version 7.16a4N ADSL Firmware Version A2pD038m.d24h
Whenever I try to connect I get the following router system log:
My first experience with Windows 10 has been extremely frustrating and wasted a lot of time. I see that this is also a very common problem. Equally frustrating is the lack of diagnostic from Windows...I appear to have no way of knowing why the connection failed (hence why I have shown the router log).
My aunt did the free Windows 10 update from Windows 7. After the update she had no internet connection so she decided to roll back to Windows 7. After the roll back, she still has no connection. Her connection icon says "unidentified network" and will not connect to the internet. It is plugged directly into the modem.
