Overclock Settings Have Failed Error On First Boot

Aug 2, 2015

I recently upgrade from Windows 7 to Windows 10 ( Build 10240). I had my overclock settings at 4.4 GHz/1.172 CPU Vin (specs listed at the bottom). My computer had no issues prior to switching to Windows 10. However, my computer always crashes and gives me the "overclock settings have failed" error within the first 10 minutes. This seems to only happen during the first boot session of my computer.

After restarting, the computer seems to run fine with no problems. I've tried restarting with default CPU settings and my usual OC settings. My computer runs for several hours with no issues. The issue comes back after I've turned the computer off for a long period of time (~3-5 hours).

I think its a Windows 10 issue, but I'm not sure.

Specs
OS: Windows 10 Pro 64-bit (Build 10240)
Mobo: MSI Z87-G41 PC Mate
CPU: i5-4690k
RAM: Kingston HyperX 8 GB

View 1 Replies


Similar Messages:


Factory Restore - How To Get Rid Of Overclock Settings

Nov 29, 2015

Like the title says, I have the overclock set since I got the computer almost two years ago and it is running great. Recently the computer has been sluggish and I am assuming its because of a torrent file...anyway looking to factory restore the computer but hoping I won't have to go through and write down all the bios settings in the case it wipes my OC.

View 1 Replies

Boot Loops When Overclock CPU

Jul 9, 2015

I recently installed windows 10 build 10162 and I installed every update for it and all of my drivers (that I know of).I was able to overclock my gpu no problem and was able to do that + cpu in windows 7.But for some reason raising my clock speed from 32 (3.2ghz) to 33 (3.3ghz) windows 10 decided to be autistic and bootloop everytime it reaches the logo.

SPECS:
GTX 750 ti OC
Intel Pentium g3258
msi h81m-e33
Corsair Vengence 1600mhz 8gb ram
Corsair 430watts psu
Western Digital blue 1tb hard drive

View 1 Replies

Reset Keep Files And Settings Failed To Boot And Rolled Back

Aug 8, 2015

Nothing changed, nothing installed. Edge stopped working, Cortana stopped working. Mail stopped working. SFC scannow found corrupt files but unable to fix.Reset keep files and settings failed to boot and rolled back. As did remove everything.Stuck with a very broken PC that is filling logs with everything stopped working and was closed.Just defender installed.

View 9 Replies

Installation :: Upgrade Failed Error 0xC1900101 Safe OS During Boot

Jul 30, 2015

I received the error shown as the installation started, the first reboot after downloading the files and updates.

View 3 Replies

Installation Failed In Safe OS Phase With Error During Boot 0xC1900101-0x200

Aug 5, 2015

Still trying to update to windows 10. Have updated windows 7 w/sp1 and have checked that my computer is ready for update 10. Everything goes great until final shut-down and restart.Then I get black screen with Blue Flag and locks up, will not go any further. After 5 hours of waiting tried turning off and it restarted and gave this error message: Instalation failed in the safe OS phase with error during Boot. 0xC1900101-0x20017

View 3 Replies

Errors 0xC1900101-0x20017 - Installation Failed In Safe OS Phase With Error During Boot Operation

Oct 20, 2015

The upgrade process seems to go on Ok, but, near the end I see this message:
 
"The drive where Windows is installed is locked. Unlock the drive and try again.

"Errors 0xC1900101-0x20017

"The installation failed in the SAFE_OS phase with an error during BOOT operation.

View 3 Replies

Unable To Access Settings - Application Has Failed To Start

Aug 10, 2015

When I try to access Settings, I get the following error:

ms-settings:// The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.

I tried the command-line suggested and right after I hit enter, I get a flash of a window popping up on my screen and then it's gone. It's so quick I can't see what it's trying to open.

View 2 Replies

Motherboard Overclock Failing After Upgrade

Oct 27, 2015

I don't really know whats going on but I wiped my old system, re installed win 7 and then upgraded to win 10 and now my oc motherboard bundle keeps failing. I can use the computer for 10 to 20 mins and then it powers itself down resets and comes up with a message saying the settings have failed, if I re load the profile and reboot the comp will work until I turn it off for the night and then the same problem following day.

The bundle worked fine since I purchased it at the beginning of the year and is oc through bios by overclockers uk so I thought it didn't make any difference what os I used....

breeze msi z97 intel i5 4690k @ 4.2 overclock bundle
16G Ram
Zotac 780ti sli
500gb Samsung ssd
win 10 64 bit

View 1 Replies

Keep Getting Installation Failed In Second Boot

Aug 25, 2015

I have been trying to install the Windows 10 upgrade to no avail .

I am running windows 7 home premium x-64 on a Gateway NV78 laptop.

Things I have already tried range from deleting programs and device drivers to reinstalling the updater. Have run a clean boot and ran from the updater, the build. a startup disk, and from a usb flash drive. I have deleted my printer drivers, virus software, and cleaners.

View 2 Replies

After Failed Upgrade PC Will Only Boot XP

Aug 22, 2015

After unsuccessfully trying to installing windows 10,it was stuck on 46% for 17 hours.
 
I tried to reinstall my windows 7 Pro Disc,it wouldn’t boot and was not recognize the disc,l tried to load and boot an Linux Ubuntu & Mint via usb & disc,didn't work.
 
I tried an XP pro disc that l downloaded and burnt onto a CD,that loaded XP pro on my PC. Which seems to work apart from not been able to access the internet.
 
I'm thinking maybe l should wipe the hard-drive and try to  reinstall my windows 7.

View 13 Replies

Cloned HDD But Failed Boot When Restart PC

Jan 6, 2016

Today I cloned windows 10 using Clonezilla latest stable, but when i restarted the pc with only the new hdd which i cloned windows in plugged, it says "failed boot please insert boot disk press enter" , when i plugged my other hdd , booted to windows and took a look at how clonezilla saved the image :

The image contains :

What will i do next to make this img my main OS, ?

View 1 Replies

Error / Movefile Failed Code 183

Nov 5, 2015

Whenever I try to install a new version of some software I get the following message: "movefile failed code 183".

View 6 Replies

Download Got To Around 75% And Failed - Error 80240020

Aug 6, 2015

Windows 10 download has been trying to update and failed at least 25 times, same error 80240020.

I have tried deleting files in the C;/windows/softwaredistribution/download and running wuauclt.exe/updatenow but no luck.

Download got to around 75% last night and failed.

View 1 Replies

Installation :: Failed Factory Reset - Won't Boot Up

Feb 10, 2016

Recently, I decided to do a factory reset, to cleanly wipe my drive, with the exception of Windows. When the reset was about 30% through, the reset failed. Now, when I try and use my laptop, it only gets to the ASUS logo, then goes to a black screen with a flashing underscore symbol on the top left corner. I've tried doing F9, SHIFT+F9, and everything else in between. My laptop is an ASUS G74SX, and I don't have a recovery partition for the laptop. I also cannot get any external programs for the laptop, such as ISOs, etc.

View 1 Replies

Installation :: Reset Failed - Can't Boot Computer

Feb 10, 2016

So my computer has been kinda laggy and running slowly so I figured I would do a clean reset of Windows 10. It noted that it would take hours, which was fine. However about an hour into it, it said there was an error resetting. It then restarted the computer however I can't get passed the "ASUS" start up logo. It goes black and then loops. I hit F9 but none of the options work for me - automatic repair won't work because it says my computer doesn't have an administrator and when I try to reset again from there, it tells me that "a required drive partition is missing." I don't have the greatest knowledge on computers, so I really don't even know what that means.

I've read that I might have to reboot from a USB - how would I go upon doing that? Is there something I can download on the Microsoft website? I don't have a key because the computer came pre-loaded with Windows 8 and I upgraded to Windows 10 for free last year. Will I still be able to boot from a USB?

View 1 Replies

Installation :: Upgrade Failed (error 80240020)

Aug 4, 2015

I got the little 'Get Windows 10' icon and reserved my copy, all fine. But it still doesn't actually say it can install, not sure why. But my laptop has now tried to install W10 5 times, without telling me it was going to or asking my permission. And all five times it has failed with error code 80240020. This is not my area of expertise and I don't know why it keeps doing this. I'm not even sure I want to install it; I only reserved it to see what everyone else thought and I figured I'd have some kind of say in the matter. Basically, is it supposed to do this? And what can I do to fix it, either by stopping it trying or installing it properly?

View 2 Replies

HP Pavilion Dv6 / Update Failed Error C1900101

Jul 29, 2015

I have an HP Pavilion dv6 running Windows 7 Home. I decided to update to Windows 10. Download was successful, it attempted to install the update I guess, was on the settings part. It got stuck though on a blank screen with just a cursor for two hours so I turned off my laptop. Then it restored Windows 7, and now it's redownloading the Windows 10 update again. Thing is, I got an issue with my laptop. Whenever it boots up, I get an error message about the fan not working properly and I have to hit enter for it to continue with the restart otherwise it will power off. Could that have affected the update to Windows 10?

View 24 Replies

Event Log Error - Database Recovery / Restore Failed

Dec 4, 2015

What would be causing this?

svchost (3972) Database recovery/restore failed with unexpected error -566.

Many instances of this error in my event log.

Running windows 10 pro with November update....

View 9 Replies

Installation :: Upgrade Failed At 83% With Blue Error Screen

Aug 7, 2015

I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.

So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.

View 3 Replies

The User Profile Service Failed To Open Error

Sep 7, 2015

I get an error "The user profile control failed at login"when trying to login for the first time to a newly added family account. I accept the invitation from another computer but get the error when trying to switch to the new profile. This account runs fine on another computer. I deleted this account from this computer using Windows 10 because windows mail stopped working. Now I can not reinstall the profile.

View 1 Replies

Installation :: Cannot Install - Getting A Failed Message Error 8007000D

Oct 2, 2015

Have not been successful in updating from win 7 to win 10. I just get a message saying installation failed error 8007000D

View 1 Replies

Update Failed With Error Code 8007001F And C1900107

Nov 6, 2015

Trying to up grade dell laptop to Windows 10. Getting message that update failed with error code(s): 8007001F first try and C1900107 second try. What do I do?

View 1 Replies

Install Failed / Error Message 8007002c-4000d

Aug 6, 2015

I am trying upgrade to Windows 10 from my Windows 7 Ultimate. I downloaded and tried to install Windows 10 and it failed I got the error message 8007002c-4000d and when I tried to install it again Windows is saying - Windows isn't activated on this pc. use a product key to activate it before upgrading to windows 10. I don't know what my product key is but it shouldn't ask me what it is...

View 1 Replies

Windows Failed Updating Showing 96% - Error 8007002c

Jul 30, 2015

I can't update to Windows, I got to 97% and then it failed, got a pic showing 96%.

View 3 Replies

Update Failed 3 Times Even After Restarting PC - Error 0x80070643

Dec 11, 2015

Basically I just got windows 10 and i noticed a windows update i tried it 3 times before restarting my computer and the update kept giving me this ...

Security Update for Microsoft Visual C++ 2010 Service Pack 1 Redistributable Package (KB2565063) - Error 0x80070643

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved