PC Doesn't See Wireless HP Printer After Upgrade
Jan 26, 2016
Upgraded a client's Windows 8.1 machine to Windows 10 Pro today and it's now unable to "see" the HP OfficeJet 6600 wireless printer directly behind it. I've assigned the printer a static IP address and I CAN ping it AND print to it from a wireless computer in the back office. However, I can NOT either ping it or print to it from the front computer. The Add Printer wizard never sees it either.
The computer has both a wired Ethernet and a wireless adapter. Both are enabled and show up in IPCONFIG.
View 1 Replies
Similar Messages:
Feb 16, 2016
I recently bought a new laptop with Windows 10. My previous laptop had Windows 7 and worked very well with my Brother MFC-J475DW Wireless Printer. I tried installing the driver for the printer from the original disk that came with the printer on the W10 laptop several times and kept getting a message that there is no printer. I went to the Brother website and downloaded the latest version of the driver and still get the same message. After some research I tried for the "built in" drivers, but with no success.
View 5 Replies
Sep 16, 2015
We have a new (albeit old) wireless printer (HP Color laserjet CP3525) with a wireless adapter card. Computers running Windows 7 or Windows 8 could see the network and connect. All computers could then print to the printer. None of our computers running Windows 8.1 could see the network. I upgraded one computer to Windows 10. It can now see the printer network but cannot connect.
View 7 Replies
Sep 13, 2015
Windows states that my Lexmark wireless printer is offline yet I can print from other computers in the house not running Windows 10 ... Model X4650 ....
View 1 Replies
Sep 24, 2015
It seems that since Windows 10 my hp new laptop will not print to my wireless (old?) hp 6500 709n all in one printer..
View 11 Replies
Feb 2, 2016
ever since I had a new hard drive installed on my Toshiba Satellite I cannot make a connection to my printer. I was on Epson Tech support for almost 3 hours, and they told me the printer is fine, and I am connected to it, but there is something blocking the print job from going to the printer.
I forgot to mention that when they installed the hard drive, they upgraded my wind. 7 to Wind. 10.
View 3 Replies
Feb 3, 2016
Installed 10 and now printer doesn't work. Uninstalled and tried again, no luck.I see it in Settings, Devices and says driver is unavailable. Search for drive but comes back and says I have the correct version.Can't install software as DVD drive no longer works either.
View 2 Replies
Aug 4, 2015
Why doesn't my printer work since I upgraded to Windows 10? I checked the drivers. all is ok.
View 1 Replies
Oct 13, 2014
I'll first describe my LANs network environment. Three Windows PCs and one Linux PC. Each PC is sharing one folder called TEMP.
The PCs:
WIN10 - Windows 10 TP (non-enterprise edition)
WINXP - Windows XP Pro SP3
WINXP0 - Windows XP Home SP3
CENTOS - CentOS 6.5
Using NetBIOS over TCP/IP on each PCs for name and IP address resolution
No hosts file contains the names of the LANs PCs
The Computer Browser service is active on WIN10
The Computer Browser service is disabled on all the other Windows PCs
Samba services on CENTOS is on but the master browser in the WIN10 PC
Firewalls on all PCs is off except for WIN10 but the rules allow file/printer service through The same primary user account is used to logon to each PC No HomeGroup networking used. All PCs are in the same workgroup=LANSYS
Now with all that stated, I'll describe the problem. From WIN10, I can see the list of PCs in the workgroup and access the shared folder TEMP on each PC
From WINXP, I cannot see the list of PCs in the workgroup and can only access the shared folder TEMP on the other PCs when I use the IP address of those PCs in either My Network Places, Internet Explorer or Windows Explorer. I always receive the "Workgroup not accessible ...." popup window when attempting to view LANSYS from My Network Places.
From WINXP0, it's the same as WINXP
From CENTOS, in order to see shares I use the smbclient command. When I execute the command for WIN10, the command fails and reports that NetBIOS over TCP/IP is disabled on WIN10
But NetBIOS has to working on the LAN because I can ping each PC from any PC. I executed ipconfig/all on each Windows PC and it displays NetBIOS is enabled.
So it appears that NetBIOS Sessions service over port 139 inbound traffic on WIN10 is either buggy, crippled, or broken.
View 19 Replies
Aug 19, 2015
I installed the upgrade on my toshiba satellite everything seems ok except i cannot connect to the internet via wireless only ethernet cable and there is no sound. I have run a toshiba diagnostic and it offers no resolution.
View 1 Replies
Aug 7, 2015
I was with win7. Everything was working fine. I upgraded to win 10. Now my computer does not recognize my wireless network. My dual display does not work.
View 1 Replies
Oct 3, 2015
I have a laptop with an intel AC 7265 wireless adapter built in. With the normal Windows 10 driver, AP mode works - which I need to run Connectify.
I upgraded to the latest Intel driver as I was having other issues (Wireless would just disconnect and give me a 1609 address) but the new driver apparently doesn't support AP mode (hosted network support = no).
How I can get AP mode supported again?
View 2 Replies
Aug 8, 2015
So after 2 failed attempts at installing Windows 10 on an Acer Aspire Z5801 PC, I finally managed to succeed. However, a new problem appeared after installation.The Wireless network adapter went completely missing. Windows does not detect its existence at all, it's like the PC doesn't have one installed. It doesn't appear in Device manager + isn't listed as an "unknown device". It's simply not there at all.The wired network adapter is there, but not wireless.
Installing the driver from Acer's website - I had to select Windows 7 64-bit as the version is all that's available for my adapter.I used a USB stick to transfer the setup files to the Acer PC. It said it successfully installed but still didn't appear, even after a reboot.Used a USB wireless adapter (Netgear) to see if it was an issue with how Windows 10 handles Wi-Fi - nope, that installed and worked fine.Scanning for Windows updates after using the USB adapter. Some updates were found and installed (no driver ones though), but still no Wi-Fi.
In the end, I reverted back to Windows 7 and what do you know? The adapter got recognised again.The USB adapter isn't a viable solution since it's required by another PC. I just used it for testing purposes.
View 9 Replies
Dec 24, 2015
This didn't happen right away. They worked fine for a month or so. It is not the ISP, my ISP is very reliable, they consistently give me the bandwidth I am supposed to get. 20MB down 2MB up. The problem laptop averages 0.3MB down and 1.5MB up.
The other hosts on my home network are not having any problems. I have another Win 10 Machine that was upgraded from Win 7 that is working just fine. One Ubuntu client and one more Win 7 client.
Fixes I attempted:
I went to the HP website and applied the recommended updates.
Checked Microsoft updates - none were suggested or required.
I removed and readded the network adapter drivers. Several times.
The hardware in question is:
HP Envy 17t Laptop
OS: Windows 10 Pro Version 1511 (OS Build 10586.36)
Wireless:Broadcom BCM43142 802.11 bgn Wi-Fi Adapter driver: 6.223.215.14
Ethernet:Realtek PCIe GBE Family Controller Adapter driver: 10.1.505.2015
View 6 Replies
Aug 10, 2015
After WIndows 10 Upgrade, I lost my printer on devices. I re-install the printer's driver and still it doesn't print. All my documents were in queued all the time. And then I visited my "Devices" again and found there were already 2 printers (the other one is with 'Copy 1') - most probably that's the one I recently installed.
Question: Does my printer really was lost after Windows 10 upgrade? or it's just there and I just have to do something...? Now, that I have re-installed the driver (Brother DCP-J100) and it appeared I have 2, am I going to uninstall it? It doesn't work now, I cannot print, in general, what will I do?
View 12 Replies
Oct 22, 2015
I recently upgraded to Windows 10 and found out that I am not able to print out all. When I was using Windows 8.1, I was able to print with ease. But now, it is unable to print.
I use a Lexmark 7600 Series printer.
View 1 Replies
Aug 17, 2015
I upgrades to Win 10 the the above network/wireless printer worked fine. I've now done a fresh install and it doesn't!
The scanning function works but trying to print produces an error. I've been advised by Samsung support that their driver doesn't support Win 10 and that they don't know when a new version will be released. They said it would still function under the upgrade as it still had access to the old Win 7 drivers there.
Any way of making the Win 7 drivers available on a fresh Win 10 install?
View 5 Replies
Jan 26, 2016
The issue is I have a network printer selected as the default in Windows 10. I have the option "Let Windows manage my default printer" turned off. At one point randomly, the default printer goes back to the Adobe PDF as the default.
Steps taken:
* I have checked the registry settings to ensure that the options "let Windows manage my default printer" is switched off. I can confirm this.
* Switched the default printer back to the network printer and performed a reboot. The network printer remains as the default. At some point of the day it goes back to Adobe PDF.
View 5 Replies
Jul 30, 2015
After an upgrade to RTM - if you try and run Control panel from the start button (right mouse) it appears but you can't do anything with it -- and it eventually disappears so you can't access any of the items on it any more.
I know you can do a lot of things in Settings via the menu -- but IMO if Control Panel doesn't work then it should be removed from any menu.
View 4 Replies
Nov 12, 2015
after upgrade to 10 my dvd-rom doesn't show i get the message.Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)
View 5 Replies
Jul 31, 2015
I upgraded my Win 7 64-bit to Win 10 via the MediaCreationToolx64 download. After the upgrade, when I click on the Windows Start button (or press the Windows button on my keyboard) nothing happens. Also, typing over "Search the web and Windows" doesn't do anything -- my typing doesn't register.
View 9 Replies
Aug 14, 2015
After the upgrade from 8.1 on my laptop the mouse slider doesn't work.
View 1 Replies
Aug 25, 2015
Updated to Windows 10 from Windows 8.1 two weeks ago.
Had problems with Firefox. Tried to download to replace existing Firefox. CNET site appeared to be correct but something seemed wrong so I killed the download. But.
- The windows start menu doesn't come up when I click on the icon, but if I right-click, a text menu does appear and lets me, for example, shut down.
.- If I click on the Windows End icon in the task bar, the screen flashes but End does not come up. Ditto for the Windows Store icon.
- Somewhere SpyBot S&D was erased, but I was able to download it.
- If I double-click on a photo in Windows Explorer, I get a popup that lists the name of the jpeg and says Invalid Entry to Registry. If I right click on the photo and go to any of the options the photo is opened except if I choose Photo.
- Firefox cannot properly display the Yahoo mail page, though Pale Moon and Opera can.
- I have Avast Anti-Virus and MalwareBytes Anti-Malware and when I run their scans, they find no issues.
View 5 Replies
Sep 6, 2015
I like to think I am fairy familiar with installation and set-up but this has got me beat. After installing Windows 10 my wifi continually drops out every 10 minutes or so. Cable connections are fine and other devices in the house are fine; just my laptop.
View 1 Replies
Oct 22, 2015
My Dell laptop which is windows 10 only has a chronic problem with the adapter constantly needing to be reset. Searching for similar problems led me to the possibility of a USB adapter.
View 1 Replies
Oct 11, 2015
Yooooo! I have a Lenovo Y510p with modified BIOS so I could replace the crappy Intel wireless card that came with it (Intel Centrino N2230) for an Azurewave - Broadcom 4352. The experience has been good so far, the only problem I'm having is the low wireless signal with the card. I have other laptops that have higher range and strengths on the same place with older cards.
I've tried verifying (and even swapping) the cables and noted no difference. I asked on another forum and they told me that it could be that the card is not receiving enough power, but I have yet to find a settings in the BIOS or in Windows that dwindles its performance. I have recently updated the driver from Lenovo's website and it didn't improve a bit. How to improve the wireless signal?
View 9 Replies
