PC Crashes After 5 Minutes Of Use But Works Fine After Reboot
Dec 30, 2015
about a month ago I built a new pc with windows 10 home 64 bit but about 2 weeks ago my computer had this issue where it blue-screens after 5 minutes of use, reboots and works perfectly after that. The most common error message that i get when it goes into blue-screen is MEMORY_MANAGEMENT. Also about 3 weeks ago i was installing an internet card, i plugged in the internet card and the computer turned on. The card didn't click into place so i pulled it out(while the computer was on, i know very stupid) but while i was doing that it touched the GPU and caused a spark. I don't know whether i have incorrect drivers or if any of the components were damaged in the spark.
View 1 Replies
Similar Messages:
Feb 3, 2016
Over the course of about a month and a half I've been getting these BSODs that state driver irql not less or equal (netio.sys) and also sometimes page fault in non paged area. the weird thing is that after 5 mins the system crashes however after I reboot the system works perfectly fine. I've been hearing a lot of reports online that the crashing has to do with faulty drivers, and i noticed that my wireless adapter (Asus pce ac68) was not working properly according to device manager I new it was faulty drivers so I took it into my local computer shop and the next day they had it fixed. However the problem has not been fixed. I still get the BSODs and apparently antivirus software is partly to blame. could Norton 360 (the antivirus software that i use) be responsible for all these crashes?
View 1 Replies
Sep 3, 2015
I'm not sure if this issue has to do with Windows 10, but I figured it may be worth looking into.
View 1 Replies
Mar 2, 2016
I've been working on my new computer. I really enjoyed picking out the parts and putting it together, but I'm not enjoying the enormous amount of troubleshooting I'm having to do.I installed Windows 10 on my PC. It froze on set-up, so I reinstalled it. I was then able to use it for a short amount of time and then it froze again. I decided to totally format the drive and reinstall it yet again, and after several attempts (it froze during the set up process several times) I was able to get it installed. Yet, it still freezes.
Normally Windows 10 would freeze in the first few minutes of use, but when I boot Windows 10 through safe mode, it doesn't seem to freeze. My guess is that some kind of software issue is causing this (drivers?) - but I don't know.(Let me clarify that I am able to boot into and use the BIOS just fine. I don't think it's a hardware issue, but I could be wrong.) Is there something that I could do to prevent this from happening? I don't have my drivers installed yet. I also noticed a few errors in the device manger. I'll list them below:
Device Manager > Other Devices
*Base System Device
*PCI DATA Aquisition and Signical Processing Controller
*PCI DATA Aquisition and Signical Processing Controller
*PCI Memory Controller
*PCI Simple Communications Controller
*SM Bus Controller
*Unknown device
They have a yellow triangle next to them. Could my freezing problem be related to this?
View 1 Replies
Aug 8, 2015
Last night I bit the bullet again & upgraded to windows 10 & then did a clean install. I have noticed that the network icon in the system tray shows a yellow triangle & says no access but I can surf fine with chrome & use qbitorrent etc.
The only way I can get rid of the yellow triangle is to disable the network adapter & then re enable it.
Not using any third party firewall as private fireall doesn't support windows 10.
View 5 Replies
Dec 25, 2015
A few days ago, I upgraded my Windows 7 laptop to Windows 10 and took Cortana for a bit of a test drive. It wasn't great but it might be useful on some occasions.
Today, I bought a brand new laptop which installed Windows 10 when I powered it on. After the installation, I was checking things out a bit and wanted to verify that Cortana was working on the new laptop. Cortana promptly told me it was not available in this region!
This makes no sense to me. I was in Southern Ontario, Canada, both times (although in different cities within the area). I can't believe that Cortana would work in London Ontario but NOT in Kitchener Ontario, which is only an hour east of London.
how I can coax Cortana to work on the new laptop?
View 1 Replies
Aug 17, 2015
It works fine in diagnostic mode but full speed in regular windows
View 4 Replies
Nov 29, 2015
I have an HP Stream 7 that only has 32 GB of space. I put in an SD card and changed the default location in "Storage" to install all new apps to the SD card. Whenever I try to install an app now, I get an error and will not install. When I changed it back to install on C, it downloads and works fine. Is there any work arounds? I saw that someone mentioned they installed the apps to C, and then moved them to the SD card.
View 1 Replies
Nov 23, 2015
I just installed 10 and everything installed properly. My apps work fine. My problem is five minutes after everything loads and the Desktop is populated I get the black screen and cursor. If I am working in a app l.e. Mail, the app stays up but the desktop, task bar etc. and everything else goes into black screen. if I close the app then I have nothing.
View 4 Replies
Dec 17, 2015
I recently purchased a new Alienware Laptop with Windows 10 installed. I'm having issues where on start-up, programs such as File Explorer, Internet Explorer etc. are taking 5-10 mins to load, whilst Apps such as Windows Edge load straight away. If I also try to open say my C Drive on File Explorer once it loads, I just get the Blue Loading Disc for another 5-10 mins until that loads.
But if I restart my laptop, everything then seems to run fine after that (but obviously I don't want to have to keep doing that as a permanent solution). I'll run a Virus Scan and make sure there's nothing bad on there...
View 4 Replies
Sep 25, 2015
So i just upgraded from 7 to 10. Ive never had internet issues. The internet works sometimes for ten minutes then is blocked. Then sometimes work for 2 hours then its blocked. Ive disabled the network connection and then enabled it. It fixes it for 10 minutes then blocked. Ive tried updating my network driver software and it says up to date.
View 3 Replies
Jul 2, 2015
Using a LOCAL account I have no problem with Shares -- how do I set these now using an Ms account.
Samba just times out trying to access Windows machine where I'm logged on with an Ms account. Also I can't access other Windows machines from the Ms account. The other Windows machines can't access the Windows machine where I'm logged on with an Ms account.
All these problems DISAPPEAR when using a LOCAL account.
I think my future strategy will be just keep a MINIMAL Windows VM with an Ms account to GET the insider builds and then revert back to Local accounts.
View 9 Replies
Aug 17, 2015
I recently built my pc about a week ago and when i play games, my pc screen crashes and the screen freezes (Explosions in Rocket League), I hear a buzzing noise in my headphones during the crash, and my pc reboots to windows like normal. I've run mem test 86, prime 95, deleted nvidia audio drivers, and installed every driver available for my mobo, gpu, and cpu, and the temperatures also were great when stress testing. I downloaded a program called Who Crashed and it showed me the reason for the crash. It is the same one over and over. It has to do something with Video Memory in the graphics card, but these errors are beyond my knowledge of computers. I am running Windows 10 64 bit. PC specs and the error message below; (bad GPU memory?)
[URL] ....
CPU- i5 4690k
GPU- GTX 970 STRIX
Ram - 8 GB (no errors found in the individual dimms)
PSU- EVGA 650 watt 80 gold +
Error Message,
On Sun 8/2/2015 5:55:43 PM GMT your computer crashed
crash dump file: C:WindowsMinidump80215-5718-01.dmp
This was probably caused by the following module: watchdog.sys (watchdog+0x3C3D)
Bugcheck code: 0x10E (0x2E, 0xFFFFC000CC4720D0, 0xFFFFC000D9D236E0, 0xFFFFD00119D08730)
Error: VIDEO_MEMORY_MANAGEMENT_INTERNAL
file path: C:Windowssystem32driverswatchdog.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Watchdog Driver
Bug check description: This indicates that the video memory manager has encountered a condition that it is unable to recover from.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.
View 1 Replies
Feb 26, 2016
I've done a clean install of Win 10. Games that work perfectly on Win 7 64 bit are crashing consistently on Win 10 Pro 64 bit. I was a system builder for 15 years, but I don't know much about Win 10, and am no expert on advanced trouble shooting.
It only crashes in games. I only play driving games/simulators (Project Cars, Driver SF, Burnout Paradise, and several Need for Speed games). It crashes on every one of them. When it crashes, it's 5-10 mins into game, crashes to white or black screen with no sound. The system does not reboot (even when set to reboot on errors). It simply hangs with a white or black screen and no sound. Keyboard strokes no longer work either.
The only thing showing in event viewer is error 41 kernel power (63), which is obviously when I'm manually restarting by holding power or reset buttons.
System is not overclocked other than I like to run my video card fans at 70% with MSI Afterburner (crashed before and after I installed Afterburner)
System is dust free and has good air flow.
I've got several monitoring devices, doesn't appear to be a heat issue with CPU (55C-60C at crash) and video card (57-58C at crash)
Ran MemTest over night, no errors
Ran Prime95 over night, no errors
Ran Heaven Benchmark overnight, no errors
Ran Seatools long test on all hard drives, no errors
Have latest MB drivers and BIOS
Page file is set to physical memory x1.5 and resides on C: with OS.
I've tried complete memory dump, small memory dump, and automatic memory dump - all set to overwrite existing - it never saves a dmp file Ctrl/Alt/Del does nothing
I've gone from a Belkin surge protector and straight to the wall power - no difference.
Tried many different drivers for my video card. I completely remove with DDU in safe mode before installing different ones. Older (14.9, 14.8, 14.12, 13.9, and 13.12) drivers do not stop fans and vary between black and white screens at crash - but the latest Crimson (15.201, 15.3, and 16.1.1 Beta) drivers stop the fans during crash like the PCI-E slot has stopped working completely (this seems to be the key to the problem, but I'm lost as to what it might be) .
System specs:
MB: GA-H97-HD3
CPU: Intel i5 4690 (stock cooler)
Memory: 2x 4GB GSkill F3-12800CL8
Graphics: AMD Radeon 7850 OC (300MHz/1200MHz) (onboard Intel controller disabled and drivers uninstalled)
HDDs: Corsair 256GB SSD with OS (141GB free space), 3x 2TB WD Red for storage (all with at least 40% free space)
PSU: Seasonic 520w M1211 Bronze
I have a backup image of Win 7, and everything still works correctly on it. If not for that, I'd think it was the MB PCI-E slot. That, and the tests on hardware seem to imply that it's not a hardware problem.
View 3 Replies
Feb 23, 2016
Have an office computer which bluescreens daily after a certain period of time, but then is fine for the rest of the working day.
BSOD shows CRITICAL_STRUCTURE_CORRUPTION,
and bluescreenview shows plenty of ntoskrnl.exe+ 14e2a0
I'm sure its relating to a driver but how to go about finding out which one is most likely at fault. Is there a website I can dump one of the DM log files into and have it bring up a list of outdated drivers?
View 4 Replies
Oct 24, 2015
I have an acer aspire E1-531. Upgraded to windows 10 first week in aug. from windows 7. first download failed miserably. my son in law removed windows 10 and reset windows 7 to bare bones. then downloaded windows 10 again. all seemed well, upgrade loaded fine. Since the middle of august most updates fail. Cumulative updates have not installed, period. I keep getting error codes, troubleshooting does no good. Says drivers out of date, files corrupted. Event viewer is loaded with failures and warnings. I have Malwarebytes premium.
View 3 Replies
Jul 29, 2015
I installed window 10 today and cannot play any CDas there is no sound. DVD picture is fine but no sound. My computer is a Dell PC 260 and has AMD 6450 card. I tried very hard to make it work. I don't where the problem is. I had window7 before and had no problem with any thing.
View 3 Replies
Feb 10, 2016
I have a strange issue on my Windows 10 computer: I can only see 1 computer under my home network, but other computers do not appear at all. However, I can access them fine typing in the address bar manually.
Also, for some reason, "LEESERVERPC" does not appear on my network folder, but it appears on the left pane. Is this a Windows 10 issue? Other computers are running Windows Server 2012R2 or Windows 7 and they easily find all computers in the network. I rebooted and resetted my router countless number of times. Refreshing doesn't seem to do anything.
Background: Originally, my Windows 10 computer was seeing all the computers in the network. As I was trying to set up another computer on the network, I refresh my network several times from my Windows 10 computer, and all a sudden all the computers except 1 disappeared on my Windows Explorer "Network". Every other computer in the network has no issues.
See Pic:
I want to emphasize that I CAN ACCESS the shared network computers. It's just that Windows Explorer's "Network" does not show most of the computers!
View 3 Replies
Aug 15, 2015
I have been trying to test Bluetooth file transfer on my Lenovo IdeaPad running Windows 10. I am using an Android phone and an Android tablet to transfer a file. NOTE: Bluetooth transfer from the phone to the tablet works as expected, therefore any error in the Bluetooth stack on these devices can be ruled out.
On the Windows 10 laptop, the pairing works. I've documented the process here. The error can be seen in picture 3.
I can pair the LG Optimus G Pro with Windows 10. However, when I initiate transfer from the phone OR the PC, the transfer fails. On Android, the error is just "Transfer unsuccessful". I've posted 3 images about the error on Windows when transfer is initiated.
1) Device paired confirmation: [URL]
2) Initiating transfer: [URL]
3) Transfer failure: [URL] (Connected party did not properly respond after a period of time...)
I have a Broadcom Bluetooth USB 4.0 driver installed. How to solve this? Lenovo has not published a Win 10 specific driver for my device (Y580)
View 2 Replies
Feb 16, 2016
My videos all play upside down when using VLC. They are OK on Movie player. I am using the latest VLC download.
View 1 Replies
Aug 7, 2015
I am receiving emails fine but they won't send ever since I installed windows 10
View 2 Replies
Aug 8, 2015
I have recently upgraded to Windows 10. I am having a problem with all of the web browsers installed on my system (except the one built in to Steam). My conncetion is perfectly fine, but I cannot connect to Facebook or Google on Chrome, Edge, Internet Explorer or Firefox, and can't connect to Reddit on Firefox only. I tried pinging each of these websites on my command prompt and recieved responses each time. These seem to be the only websites affected by the problem. The web browser built in to Steam seems uneffected by this problem.
View 1 Replies
Aug 8, 2015
I have an Asus Book Flip TP500LN (like a Lenovo Yoga but with bigger screen and Nvidia 840m) and although it automatically switches to tablet mode when flipped just fine, if I rotate to portrait the screen is flipped. If I hold it in landscape the desktop stays right side up even if I rotate it 180 degrees, but 90 and 270 degrees has the desktop upside down. It worked fine before.
View 4 Replies
Nov 5, 2015
My computer has been having a problem with locking up randomly. Hard reset is the only way to recover. I ran stress test on CPU, GPU, memory checker, Sea gate tools was never able to recreate the problem or find any issues with any hardware. I also swapped out video cards and still had the same issue. I also monitored temperatures and never had it get hot. But if i reboot into safe mode with networking windows never locks up.
Computer specs
windows 10-upgraded from 8.1
i7-4820k
8gb ram
mobo alienware aurora-r4
Radeon r9 200 series
View 3 Replies
Nov 2, 2015
I just updated to Windows 10 but I think the problem was with Windows 8 too, Sometimes my internet is out on my PC while the internet is still up on my brothers PC, tho this problem happens about 3 times a very few days.. We have 5+ computers in the house and 4 are on daily while 3 is being used daily the 4th one is not very used daily and sometimes off most of the time. So the 2 computers have Windows 10 and 3rd computer has Windows 7 while the 4th computer has Windows 10 also. I read on an article which says that Windows 10 uses bandwidth without you know and I checked task manager and on windows 8 my CPU and Memory was just fine and when I upgraded to Windows 10 my CPU spiked to about 20% and Memory spiked to about 72% and sometimes random numbers appear on all 4 sections( CPU, Memory, Disk, Network).
View 9 Replies
Oct 10, 2015
My motherboard is a P8Z77-V, with Gigabyte 7950 video card, if that matters.
I did the windows 10 upgrade, and all seems well, except waking from Standby.
If I go into start menu, and choose sleep, everything spins down, and the computer shuts itself off. I am assuming this 'sleep' is some sort of hibernate.
But when I leave the computer over night I come back and the monitors are off,but lights on tower on. I am assuming this is standby mode? Anyway, I can't wake the computer from it, using mouse or keyboard (both USB). Clicking power button on tower does nothing. I generally have to click the reset button on tower and do a full boot sequence. When I log in, I do not get a message about windows not shutting down properly (maybe that message is no more in 10?), but clearly it is a fresh desktop.
I reset all bios settings, and update to most recent bios. I have the latest graphics drivers.
Here is some investigating I did, hopefully it works:
Code:
D:UsersShea.Wilbur>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast StartupThe following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby state. Standby (S2) The system firmware does not support this standby state. Standby (S0 Low Power Idle) The system firmware does not support this standby state.
Code:
C:WINDOWSsystem32>powercfg /sleepstudyS0 Low Power Idle is not supported on this machine. Cannot run tool. BIOS settings to check?
View 1 Replies
