So every since wednesday i updated my windows (automatically when shutdown) and when i turn the pc back on it goes into repair and will keep restarting and repairing... I have to keep restoring to be able to even use the pc but windows needs updating and will keep doing this everytime, resorting in me having to restore AGAIN! This also happens when i try to upgrade to windows 10 .
Is the message that Im getting. From my experience, this message displays when you upgrade to Windows 10, but I have already upgraded a few months back. I turned on my computer and I get this updating screen.
I chose the "fast" ring update on the windows insider app in order to get the preview for windows 10 on my lumia 1520. It updated fine but since the migrating data process began, it has been stuck in a continuous reboot loop. The screen shows the nokia logo and the windows logo briefly, then shows the at&t logo (since I bought the phone in the US) with "not for resale" written in the bottom left corner. How can I fix this? I don't mind losing all my data.
I recently upgraded to an SSD, I don't know if this is related.
While my PC was idle, it shut down for some reason (probably updates). I came back to an "Updating Windows" screen -- the exact screen used when installing, that big circle icon with a percentage. I have never had a computer boot to that on its own, but I assumed it was some important update. I let it do its thing.
Later, I came back to it doing this strange boot loop:
Motherboard splash screen Normal W10 loading icon Screen flash A second, slightly larger loading icon
The "Updating WIndows" screen. Starts at 0%, raises to 75% a split second later, then disappears and turns off. This happens in about 1/5th of a second.
I booted into a startup repair disk, and ran startup repair. It said it couldn't fix issues. Next, I ran a chkdsk, there were issues it fixed but the boot loop is still in place.
Since I just installed an SSD last week, I still have my previous disk with the operating system still functioning. I booted it up, turned off automatic updates, and checked to see what may have caused this on my current disk. There were 2 updates available: A flash player update for IE, and Windows 10 version 1511 10586. I assume it is the latter, but how it installed, since I DID NOT AUTHORIZE THE INSTALL. Automatic updates are enabled, but I would have thought it'd install in November, when it was released (not 2 months later!)
I don't dare install it on my backup, in case I have to re-clone the SSD.
I was fresh reinstalling my windows 10 onto my HDD as I encountered an error preventing me from booting the computer up, in the end I found it was my new GPU causing this error (a dead GPU?). So now my computer shows an error message: "The computer restarted unexpectedly or encountered an error during installation of windows". I looked this error up and it told me to press shift f10 to open a console and to type regedit in and to find status on local machine, changing the number from 1 to 3. I did this supposed fix, however, now my computer is in a infinite restart loop, displaying the windows 10 installation at 64% and then restarting again...?
When I got on my computer this morning, I was notified of updates. I used the restart button on the notification page thinking this would start downloading the updates. However, the computer has been stuck in Restart for 3 hours. Microsoft... can you access my IP and stop this loop? Is there anything I can do to stop this loop?
Just downloaded the newest update for Windows 10, I was asked to restart my PC to install it, that was over 30 minutes ago, since then my PC reaches the Microsoft logo and under it, it says Preparing Automatic Repair and then it restarts and does that all over again, what am I suppose to do? I can't even get past it.
I finally decided to upgrade to Windows 10 yesterday (1/17/2016). It downloaded roughly 5.76 GB into a hidden folder : "C:$Windows.~BT"
Then it prompted me to restart my computer, so I did. Once restarted, nothing changed.
So I went into Windows Update, and it just tells me: "Restart your computer to install important updates" and it has a "Restart now" button. I've restarted roughly 40 times or so in the last 2 days after trying various fixes, and it doesn't make a difference.
I checked the update history, and there are a whole bunch of Pending and Successful updates with a "Date Installed" date of 1/15/2016. Nothing more recent either.
Last night I was trying to watch some good ole' dragon ball z. When this site gave me a virus. I tried system restore and was denied. So I hard reset my PC which I just upgraded from 7 to 10.
The reset was stuck at 50% for about an hour so I turned off my PC and flipped it back on to see if it'd retry the installation.
To my surprise I'm stuck in this loop where my computer shows the boot up dell xps screen and then restarts. F8, F9, F11. NOTHING WORKS. I can't get to any recovery screen like I could with Windows 7. I don't have a disk because it was of course the free upgrade on July, 29th. Also can't burn one due to not being able to get to my Desktop.
I've been experiencing startup issues with my PC since last night. I go to startup and startup freezes. It seems that something is either stuck or freezing up on loading. Since it doesn't fully boot up, I have been hitting the reset button or holding the power button. It appears that this has made the problem worse. I went to startup this morning and am getting the same thing. Did the same steps of hitting reset and or holding the power button to shutdown. After this I am getting BSOD that keeps restarting and BSOD in a loop. The next boot loaded with repair options. I attempted to do startup repair and have been unsuccessful. How to get out of BSOD restart loop?
On start up I get the computer needs to restart and then goes into the loop of restarting from a blue screen, I can get F2 which is the Bios screen but thats all, I can see reboot on this but do not have anything to reboot with as I upgraded from win 7.
Last night I was watching a dvd on my desktop when all of a sudden a blue screen came up with a frowning face and said that "Your computer ran into a problem and needs to restart, its collecting info and will restart." It happened quickly so I didn't see what the error was but now my PC is stuck in a loop where it restarts and loads into an empty blue screen. It stays on that blue screen for a minute or so and then restarts again. I tried going into my BIOS or starting in safe mode but my PC won't go into them.
I upgraded to Windows 10 everything seems to run fine but system will not restart from the restart selection on the start menu. Windows update will not reboot automatically either. System looks like it is going to reboot, everything shuts down but as system trys to restart everything freezes. Only way around it is to do a hard shutdown by holding the power button. Updated graphics card,hard drive and bios but still no luck.
I am upgrading a computer from Windows 7 to Windows 10. I completed the download, and got a message that the computer needed to restart to continue the installation. However, when I restart and the computer comes back up, the same message appears and the installation does not progress. When I go to check Windows updates in the control panel, it says it can't check for updates because another installation is in progress. I have restarted the machine multiple times with no progress - can't go forward, can't go back.
After updating to Win 10 recently, I realized that I was lagging everytime I run some games. Even exiting them, it would still continue to mess up my CPU with heavy usage. With 16GB of ram this shouldn't happen. While in game, there was heavy graphic lag. I turned off all my additional programs in the background, did scans of CCleaner and my Anti virus. I also cleaned up registry with CCleaner.
Did some research previously and also turned off all the Customer Experience Issues in the Task Scheduler. This issue still happens every now and then. How do I check what exactly is the rundll32.exe is coming from?
i7-3770 @ 3.4GHZ 16GB Ram Motherboard: MSI Z77MA-G45 64-Bit Win10 Home Edition GPU : AMD Radeon R9 200 Series(I believe it should be the 270) 500Watt power supply
I updated this morning now I can't turn on my computer, I have tried safe mode, won't tried they recovery won't work and now reverting to Windows 7 disc installing from scratch.
I turned my computer on about 20-30 mins ago and it started "updating". After it installed some updates, restarted the pc 1-2 times, it took me to here [URL] ....
How can I get out of this strange glitch? The mouse is also operable.
Today 11-17-15 I restarted my computer to install the latest version of Window 10. (Not an Insider Build) The installation was going fine until now. It is stuck at 54%. The "breathe" animation on the percentage ring is still moving so it is not frozen.