PC No Longer Detecting GTX 970 And Second Monitor
Jul 29, 2015
So ive seen this problem in the beta versions, but no fix for the full release. PC is no longer detecting my GTX 970 and my second monitor is also undetected.
I installed the win 10 driver from then nvidia sight. For a short while the second monitor works as it should, but then turns off again.
The graphics driver fails to install on all attempts to update.
View 1 Replies
Similar Messages:
Dec 11, 2015
I have a dual monitor setup. I have 2 AOC e2252V monitors that would work fine on Windows 7. I have all updated drivers. I've checked the internet for multiple solutions but everyone's problem seemed to be that they didnt extend their displays. My problem is that both windows 10 and my graphics card are not detecting it. They are both connected to the DVI-D connections on my MSI R9 390 graphics card (installed with the latest drivers from 11/30/2015 on the MSI website.) One monitor is hooked up from VGA through a DVI-D adapter to connect to my graphics card. I assumed this wasn't the problem because I did the same thing on my previous card where it worked just fine. I checked to see if one of my DVI-D connections were faulty on the card, but my one monitor hooked up directly through a DVI-D cable (no adapter) works on both of them. If I hook up my TV through HDMI connection, it will detect my TV. I wonder if this is a problem with Windows 10, MSI R9 390, or the adapter. [URL]
View 4 Replies
Aug 3, 2015
I am really trying to like windows 10 but I am having problems from games not working to Windows not detecting the refresh rate of 144hz on my VG278HE it just says 60hz and generic monitor drivers.
I am very close to putting Windows 7 back on my system.
View 1 Replies
Sep 2, 2015
It seems like it is not detecting my second HDMI monitor. I did see that this was an issue previously resolved, but my predicament is a bit different. I use my second monitor as the primary due to the laptop monitor not working. As it is, I have been sitting for close to an hour on a black screen due to my main monitor not being picked up and no way to visually walk through to make it my primary again... If that is even the only problem. Are there any ways I can switch to my main monitor (2nd monitor) worth no visual representation whatsoever?
View 2 Replies
Aug 1, 2015
Windows 7 HP Pavilion DV7 w/ second monitor attached via RGB.Windows 10 upgrade wizard said everything was fine.Upgrade took >90 minutes. Second monitor no longer works on my laptop. (No monitor works - tried different cables, different monitors.)Contacted Samsung for support on monitor. Downloaded updated video driver.Rebooted.Windows 10 now won't boot. No system recovery options.
View 1 Replies
Dec 29, 2015
It worked fine in windows 7 but now when I choose "duplicate display" from the side menu popup the tv goes blank as if Ive unplugged the hdmi. All 3 of the remaining display options work including the extend display and tv only setting so its not a cable issue. Laptop model is XPS 17 L702X. Now when I used to do it in win 7 sometimes it wouldnt autodetect it so I would have to right click desktop, open invidia up and click rigorous display detect or something like that and then laptop screen would blink and make the beep noise like when hdmi cable got connected. Now in the invida panel it just simply wont allow mirroring, nothing happens when I right click on the display box that would normally show 1 and a smaller box would say 2. I dont get it but Id really like that feature back If its something simple I could do.
View 1 Replies
Aug 16, 2015
First here's my rig:
Mobo: asrock 970 pro3 r2.0
CPU: amd fx6300 not oc
Gpu: vapor x r9 280x 3gb
Ram: 16gb (8gb vengeance pro, 8gb ripjaws 1600mhz)
Psu: corsair RM1000
Storage: Seagate barracuda 2tb, Seagate pipeline 500gb, Kingston now ssd 120gb.
Problem: okay so I recently upgraded my rig from a 7970 to a 280x. I had a 550w antec psu at the time and my pc shut off by itself a few times which stuffed with my windows 10 install. It was saying "bootmgr is missing. So I went to reinstall windows and it shut off again halfway through, I decided it was due to lack of power so I recently bought the rm1000. I have hooked everything up and was about to do an install of windows 7 but now not one of my drives are showing up. Not in the bios either.
I have tried different cables, different ports, the cables work with an optical drive and it shows up. I have tried updating the bios and cleaning cos. Replaced the battery. Is it possible that a psu can kill all three drives without any visible sign? I hope not.
View 1 Replies
Oct 3, 2015
Experienced this problem of losing wifi drivers after installing win 10, my hp laptop does not detect wifi but if I plug in ethernet cable the internet connection is sporadic.
View 3 Replies
Aug 17, 2015
Windows 8.1 had detecting my 2 monitors attached to the laptop. After the upgrade to Windows 10, its not detecting those two monitors.
View 2 Replies
Oct 29, 2015
My laptop came installed with a 4GB RAM in slot2. The other slot has been free. Today I bought another 4GB module with same specifications and after inserting to slot1, it did not get detected.
I swapped the modules, and the new RAM is functioning perfectly. However, the RAM in slot1 is not getting detected. I have installed CPU-Z, but it too did not detect slot1.
I have also run a memory test, but it did not detect any errors. The BIOS is also showing only 4GB!
I need my laptop to have 8GB RAM.
View 6 Replies
Nov 18, 2015
I am having a problem with the windows 10 upgrade service.
It keeps telling me my display adaptor is a Matrox adaptor but the actual adaptor is an intel motherboard adaptor.
No Matrox adaptor has ever been fitted (I have had the computer for 15 years (various new motherboards etc) and never have used a Matrox adaptor.
It wont let me upgrade as it says the adaptor is not supported.
View 6 Replies
Sep 25, 2015
I love Windows 8.1 Pro, and now I have Windows 10. However, the point is that I've read articles and they all verify that Windows 10 detects cracked software and does not allow us to use them.Moreover, has Microsoft stop the OS from detecting cracked software and block them?
View 1 Replies
Nov 22, 2015
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
View 9 Replies
Nov 27, 2015
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
View 6 Replies
Feb 10, 2016
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
View 3 Replies
Aug 10, 2015
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
View 1 Replies
Aug 14, 2015
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
View 1 Replies
Sep 23, 2015
I am running Windows 10
MSI R9 390 GPU
AMD Catalyst version 15.7.1
Main monitor is CrossOver QHD270 via Dual Link DVI
Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
View 1 Replies
Aug 24, 2015
I recently reinstalled Fallout 3 but noticed every time I saved, they weren't detected in the Load screen. I checked the folder (C:UsersAlien2DocumentsMy GamesFallout3) and my saves were there! So the game is saving, but I'm unable to load any of them cuz they aren't getting detected.
I have Windows 10 which warns me the game is not optimized, but it runs fine. Also, I want to note I did not have to install Games for Windows Live when I installed fallout 3 through Steam, but when I click the warning Windows 10 gives me about the game not running properly, it sends me straight to an install link for GfWL which I decided to reinstall.
I had hoped to use the migrate method where you'd move the save files from My Games/Fallout 3 into whatever profile folder there is made from GfWL but after reinstalling and logging into my old account it didn't work.why I can't load my games?
View 1 Replies
Aug 10, 2015
So I recently built my PC and had ordered Windows 8.1, but it said that it was upgradeable to Windows 10. So I started the computer up after completion, then installed windows. When I got to the desktop it asked me if I wanted to upgrade to Windows 10. I said no because I wanted to research and see if it was stable enough. So today I decided to try it, but found out that I can no longer upgrade.
View 1 Replies
Nov 22, 2015
I'm not sure why the thumbnails for any file are no longer being displaying. I have not touched any of the settings.
I have tried both solutions here multiple times and restarted. [URL] .....
View 1 Replies
Jan 7, 2016
I got a 128GB Flash Drive which I proceeded to install a portable, bootable Fedora install on. Of course, naturally, since Fedora is light weight, I had all sorts of other room left over. However, when I plug the USB drive back into the main Desktop, it no longer asks me what I want to do with the USB drive, even with AutoPlay stuff disabled. It's as if the USB Drive doesn't exist.
However, I checked quickly on one of my laptops that has never seen the drive and the AutoPlay on that device immediately popped in. When I selected "view files and folders", voila, I could see the Flash Drive with a folder for the Fedora install and plenty of other open space.How can I force my computer to see this Flash Drive all over again? it's doing the same thing with the storage on my fiance's iPhone. since I can't see her phone anymore when I plug it in (even iTunes doesn't see it).
View 5 Replies
Dec 3, 2015
Last night, Dec 3, 2015, windows automatically updated and this morning my computer gave me a new windows startup screen. All my stuff was there, it seems a new version of windows was installed.
Windows 10 home, 64 bit.
I attempted to check my email the usual way, by the Comcast web site, at xfinity.com. I received error messages that I needed to enable cookies. I checked my settings and cookies were still set where I left them, blocking third party cookies only.
I re-tried several times, getting the same error messages, so I enabled all cookies. I still get the same error message, I cannot access my email because cookies are not enabled.
View 1 Replies
Dec 1, 2015
I have had Win 10 installed and working well until this past week, when the Start button on my keyboard and the on screen icon no longer work. The screen icon will turn dark yellow with either touch or pen, but it does not open. I can right click it and get to that menu, but left click does nothing. Other than resetting Win 10
View 4 Replies
Dec 16, 2015
I can no longer scan from my printer since downloading Windows 10
View 3 Replies
Aug 24, 2015
I used to be able to play them....doesn't work in YouTube or anything
View 1 Replies