I use Windows 10, but ever since upgrade from XP to windows 7, PSD thumbnails are not showing in windows explorer, as jpg and gif does.
Tried this solution but nothing changed:
How to enable Thumbnail view for Photoshop PSD files in Windows 7?
I was trying to save an image from the internet and my fingers slipped on a key. Since then every time the save-as box opens, where the files should show, it is just grey. I will attach a picture to show the issue. Need getting back the thumbnails which should show where the grey bit is.
View 3 RepliesRecently windows started having a problem displaying thumbnails for JPGs. If I load a folder of images it shows them all for a moment, then swiftly changes loads of them to white blanks.
A bit more investigating and I realise it's only for image files over 10MB. I'm a photographer, so looking at images litterally all day, so it's quite an annoyance! Or course I use other software for sorting, organising, resizing etc, but plenty of times you just want to load a folder and see the images.
Here's a screengrab, sorting a folder by size, anything larger than 10MB is a white blank icon:
In explorer under view/options under View "Always show icons never thumbnails" is unchecked. I also tried to choose "Restore Defaults" from there as well with no luck. Yes, I closed and re-opened explorer after the change.
I under went under Control Panel/System/Advanced/System Properties/Performance and made sure "Save Taskbar Thumbnail Previews" was checked as well as "Show thumbnails instead of icons" was also checked.
My laptop is displaying the wrong thumbnails after i upgrade to windows 10. When you open the file explorer and preview an file the next file your going to preview will be same thumbnail to the first one even the other files.
View 1 RepliesI installed Windows 10 last week as an upgrade from Windows 7, and the internet part is working good. But something with the file explorer didn't work. The Document, Pictures, Music, and Video files are still there, but the thumbnails load slowly, or not at all. If it means anything, there's a green bar that slowly moves across the top of the screen.
View 2 RepliesI have unchecked the option to 'show icons instead of thumbnails' (view>options>folder options) and I have checked 'show icons' (performance>advanced) but still I get icons instead of thumbnails. I have closed and restarted file explorer multiple times to no change. I have posted the screenshot below to show the current settings.
View 2 Repliesfound this (finally) on the net:
[URL]
except this one:
In reply to Pinaki Mohanty's post on April 6, 2013
I tried this and it didn't work. But together with what I did next it probably worked.
Open up the folder with the pictures and click on the View tab
Next click on Options to the far right
Then Click on Change folder and search options
This opens up an options menu
Navigate to the view tab
uncheck the box that says Always show icons, never thumbnails
And Check the box that says Display file icon on thumbnails.
I noticed that when opening Desktop in Windows Explorer, it doesn't show any of the icons of This PC, My Documents, Network and Recycle Bin. I have enabled these icons to be shown on the Desktop through the "Desktop Icons Settings" option. However, Explorer ignores them and only shows icons that are manually put on the Desktop.
View 9 RepliesMy external drive(Samsung) connected via usb3 has started showing twice in file explorer. Opening either shows exactly the same files inside. Screen shot below, I've never tried this so I hope I've done it OK...
View 3 RepliesI have recently upgraded from Windows 8.1 Pro to Windows 10 Pro and everything was fine then. But recently I am experiencing an issue which is "Pinned items and Jump List are not displayed in File Explorer in both Taskbar and Start Menu". Pinned items and Jump Lists are displayed for other programs in Taskbar as usual but the issue is only with File Explorer. I have restarted the PC but still the problem persists and I have also disabled Cortana.
System Specs:
CPU - Intel Core 2 Duo
Motherboard - Gigabyte (G31M-ES2L)
RAM - 4 GB
Graphics Card - NVIDIA GTX 560 (2 GB)
OS - Windows 10 Pro (64 bit)
I have several server drives mapped to my Surface Pro 3 tablet, and from time to time they disappear from Windows Explorer and XYplorer (an Explorer replacement). They are still there and mapped, as Net Use shows them mapped properly. But to get them tho show up in either Explorer or XYplorer, I have to physically remap them (right click: Map Network Drive...) and when I do so they already show up with the proper drive connection but won't appear unless I finish the remapping. XYplorer has a tool to reconnect all network drives, but nothing happens there.
View 5 RepliesIn Windows 10 File Explorer keeps showing multiple Documents Folders then they disappear and come back again all without my doing anything.
View -1 RepliesWhen I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
My new laptop has Windows10 pre-installed. It crashed and file explorer won't now show recent files. It seems to be showing recent folders but there are no recent files. Settings/personalisation/start shows "recently opened files" is turned "on" and File Explorer is showing on the Task Bar....
View 1 RepliesThis has suddenly happened, explorer is missing the 'space' information from the display.
The build up to this was simply creating a Windows disk image using W10's own utility. Mysteriously the space bar on the problem partition showed some usage, about 1.7Gb but nothing could be found in the partition. I've even tried deleting the partition in Disk Management and reassigning a drive letter but nothing gets the display back.
My setup before the problem was:
- Windows 8.1 in a 250GB SSD with Linux dual boot
- Secondary 160GB HDD (fs: ntfs, type: primary)
- Secondary 3TB HDD (fs: ntfs, type: gpt)
The 3TB drive was working normally on windows 8.1 when I bought it. After some months I decided to upgrade to Windows 10. After that, I cannot access my drive and Disk Management shows just grey options for the drive.
[URL]
After that I did a clean Windows 8.1 install again just to see if it was an OS problem, but now the same is going on with the management system. I used MiniTool Partition Wizard to check what's going on and this is what it shows
[URL]
What I tried doing is to force a label on this drive with MiniTool (in this case, D:, but then when I try to access the folders in Explorer it says 'D: is not accessible, access denied'. I already tried giving me all permissions/full control in the security tab in various ways but none worked, it still said 'Access Denied'.
[URL]
The only way I could finally access it is by killing explorer.exe and then starting it again with Admin rights, but once I reboot the system, the drive dissappears again and I have to do everything all over (assign label with MiniTool -> kill explorer -> open explorer with admin rights).
[URL]
P.S: Before you ask, I am not trying to recover deleted data. The partition exists, and I can access it through MiniTool Partition Wizard (since it recognizes it as a active EFI Healthy Partition on a GPT formatted drive). The problem is trying to access through Windows Explorer to the data.
[URL]
I'm having trouble with USB devices not showing up in windows explorer. I put in a thumb drive with data on it, but it's not in win explorer. I went to device manager and found the TD under disk drives. Also my external 3T G: disk drive is there. The thing is that my G: drive shows up twice in win explorer, once as a disk drive and the other as an expansion drive. I still can't see the TD. So how can I look at the drive or do anything with it. The light on it is on and the computer see's it, but no way to access it. I have the latest windows updates. I have all usb and hid unchecked for the computer to put them to sleep if not used, but that doesn't work.
View 9 RepliesMy new windows 10 only sees my PC - when searching for my files in Explorer, it cannot 'see' my two external drives when I plug them in. I've looked in Device Manager and they are not showing in there either. How can I tell Win 10 to access my external drives?
I thought Win 10 would automatically spot my external drivers the moment I plugged them in? Then it would go search for and install the appropriate drivers - but it isn't doing that..
This old error suddenly seems to have come back again
Some duplicate folders showing up again. (Note I CLEAN re-installed W10 after an upgrade - legally activated).
My Windows 10 File Explorer is muddled showing many items, and in particular USB Flash Drives twice!
View 4 RepliesI just installed Windows 10 fresh and noticed that two of my Harddisks are not showing at the left menu in the Explorer.I have 3 Harddisks and only Harddisk D: ist showing. When i connect a USB-HDD it shows up instantly.
View 9 RepliesI just put the 1511 upgrade on (for the third time, but that's another story). I've noticed that when I open File Explorer I have a WHOLE BUNCH of USB ports that have nothing plugged into them... What the upgrade did, but these weren't visible previously. How do I turn them off?
And yes, I've gone into the File explorer options in the control panel and UNCHECKED "Hide empty drives". Didn't appear to make any difference...
I'm on a Windows 10 Pro PC accessing a linux server with samba etc installed and working well (visible via Homegroup to both Android and Windows 7 pro). From the Win 10 box, if I type the name of the server in Windows File Explorer, then the shares from the server show up without issue. However, if I go into the Network folder, it does not see the linux servers - even though they are correctly configured for the correct homegroup. My windows 7 machines can see the servers in "network" as can my android devices.
Here's a screenshot. Note, the red arrows show what displays in Network folder (red arrows). If I click on the Server Name (HunterNAS in this case), the server shares are displayed and it shows up in the Network folder (blue arrows). Even after making the successful connection, display of another file explorer window > Network folder displays no linux server shares...
Latest (preview) build - file explorer not showing progress when copying / moving files.
This - unless fixed soon will cause me to revert to previous build. Is it just something with my update. (W10 Pro X-64).
I don't know if this is related to Win10, or an issue that existed with my Win8.1 before. I just noticed it after upgrading yesterday.
So, my firewall just prompted me about an outbound connection attempt by a file (named C:WindowsSystem32SIHClient.exe) and I didn't recognize it. I found it using explorer, and it's unsigned; so I visited VirusTotal.com and tried to upload it... but from the file upload browse box in Chrome I can't see the file! Even typing *.* and open doesn't remove the "filter" and reveal the file. (I finally ended up copying it to desktop and uploading from there, but still don't know what the file does.)
I thought that Explorer's "File View Options" (show hidden files, do not hide operating system files, etc.) were used throughout Windows once applied. Am I wrong? Should I suspect a virus or is this normal? What gives?