After I upgraded to Windows 10 I noticed it created another hidden partition. I upgraded from Windows 7 Ultimate 64 to Win 10 Pro 64. Originally Windows 7 had a 100mb System Reserved now it's showing a unnamed 456mb partition. Do I need to keep these? Seems Strange.
I have another PC i clean installed Windows 10 only made the 450mb unnamed partition not the 100mb one. Seems no need for that one? I wanted to go back to 7 but was over the 30 days seems it all deleted to go back
A few months back I upgraded my primary hard drive to an SSD, samsung evo 850. I copied everything over using samsung migration and now there is a system reserve partition that I never noticed before,
Well, I finally decided to do the windows 10 upgrade from windows 8.1 but the partition wont allow it to happen.
Am I safe to delete that partition? I'm not entirely sure what it is.
I know about increasing the partition size but i dont know where it is on my pre-built pc. I do have a 128mb partition but i cant increase the size on my third party manager
When I try to upgrade my Dell XPS 15 running Win 8.1 to Win 10 I get a message "we couldn't update the system reserved partition", I only have an EFI system partition, not the 100MB DATA partition I've read about.
So when I built my pc I didn't get an ssd, now I got one since windows 10 is out and I want to install the upgrade on an ssd, how could i go about putting the os on the ssd without deleting all of my files on my terabyte hdd?
I just performed an upgrade from win 7-64 to Win 10. I had a 128GB SSD with the OS installed and a 4TB Seagate drive broke into two partitions- F and H drives at 2TB each. These were both application partitions only. After the upgrade, only one partition showed up (F) and the (H) is gone. The F drive now shows 1.6TB of unallocated space which I assume was the H drive. Drive manager doesn't let me do anything with it.
I accidentaly shutted down the Lenovo Yoga tablet 2 8" Windows 8.1 during Win10 update. The system won't boot and I don't know what to do. Recovery partition is also corrupted.
What I've tried so far:
1) Install clean Win10 x86 Home copy using Microsoft Media tool - Windows will be installed, but touchscreen, sound etc. doesn't work. Windows Update is unable to find and install those drivers
2) Install clean Win 8.1 x86 Enterprise copy using Microsoft Media tool, then in repair mode try to switch Windows.old Windows, Users and Program Files with current system - doesn't work, the system won't boot and everytime I try to boot the system, it tries to repair system. Without success of course.
Download Windows 8.1 with Bing x86 in hope the system will be in the same condition as I bought it. I also hope it will find required drivers.
My Dell venue pro 11 tablet comes with a 32gb inbuilt space with windows 8.1. Then I got the free windows 10 upgrade which went smoothly.
But now the problem is after the upgrade there was very little space left in my Cdrive. The recovery partition takes up 6.5gb of space. I thought of deleting it using a 3rd party software.
I need to free up that space, currently i have 11 gb free space, adding this would give me 17 gb.
System stats...Athlon 860K, Asus A55BM-E, GeForce 550Ti, 8GB Ram
Win 8.1 was installed from retail DVD onto a virgin 500GB mechanical HDD. I upgraded shortly after to a Samsung 840 EVO 120GB SSD and cloned the mechanical drive over, tested, and then formatted the mechanical drive for data. I got some real strange (to me) drive partitions - 100MB 'Data' drive which is almost full (cannot access) and a 350MB 'System Reserve' drive. The mechanical drive is a separate letter and all seems to work swimmingly. I sort of assumed this was normal.
Upon installing WinX I get the above error...from what i've read, people are having challenges moving from Win7 due to the fact that this reserve drive is only 100MB and it needs to be 300-450...well, mine's 350mb so not sure what gives.
I have a Dell 11 venue Pro (7140) tablet and I upgraded to windows 10. My tablet comes with 128Gb and I found out that I have many recovery partition. I am not sure which one I can remove it using DISKPART. Below is what I seen on the Disk Management Screen. Only C drive has volume label of C.
Interesting start to the weekend with Friday evening booting up my pc to find that Thursdays overnight update had left my partition drive unallocated. Read around for a few hours and found that reinstalling my acronis virtual disk driver would be the way to go. All seemed well and then there was another windows update and again the beyond the 2TB partition was gone. This time there is no fix with reinstalling the virtual disk driver and I don't want to mess around and wipe the perfectly good partition that Windows 10 has decided is not a fan of.
I have a new system running under Win 10 on which I want to use an SSD as the boot drive with all my s/w and a WD 6TB Black HDD for my data. However, when I format the 6TB drive it shows up as two unallocated segments, one of 2048.00 GB and the other with 3541.03 GB. The smaller one is available for a simple partition under Win 10 Disk Management, but actions for the larger one are all greyed out. When I make a simple partition in the smaller one the option to extend the partition is greyed out. What is the secret to using the full 6TB under Windows 10?
My Vaio laptop came with a built-in recovery partition (it's 'bout 32GB and hidden). Sometimes I use it to reset my PC back to factory conditions due to unexpected errors. But yesterday I was shocked 'cuz Windows Disk Management showed that my recovery partition was empty! When I checked with different third-party apps they showed the partition had 'bout 27GB in use. In fact I couldn't boot into Vaio recovery mode anymore.
Just cloned Windows 10 system disk from 230 Gb SSD to 900 Gb SSD using Acronis. New system drive works fine. Trying to remove the OS partition from old OS drive and get "OS (E Simple Volume is currently in use" and statement regarding forced deletion may affect application that is using this partition.
Is there a "safe" way to remove the OS partition and/or reformat the drive or should I disregard the warning? Note: It's connected directly to a socket on the Mother Board (a Dellism) so not sure about remove and external format. Acronis has a "disk clean" utility, but it's a DOD wipe, so not sure of its use here.
So here is my issue I had Windows 10 installed on my Asus which I had Upgraded from Windows 8. However lately my computer was running slow and unresponsive at times. I figured I would do a Factory Reset and start new on it to try and fix these issues I was having. However when I while in the process of Reseting my Laptop the reset had failed. Now when I turn my laptop on it just sits at the black screen with the Asus Logo. I have tried many solutions to this such as hitting delete prompt and resetting my start up settings.
I have an HP laptop that shipped with Windows 8.1. I upgraded to Windows 10 weeks ago and tonight I accidentally reformatted my D: drive recovery partition.
I have recovery media on a USB pen drive that I made back when I first set up my computer.
Has Windows 10 changed the D: recovery partition during the upgrade or will it be the exact same image the computer shipped with?
how I can get the recovery files back on the D: partition?
I have a disk (HP machine) which has a recovery partition on it. When I go into Admin tools/Virtual disk manager, I can see the drive there (a partition on the real disk) but I can't delete it.
A few months ago, i made a dual boot of Windows 8.1 and Windows 10. Now I was running out of memory on my Windows 10 partition, so I removed Windows 8.1. I was unable to add the free space to the Windows 10 partition because this free space was before the 10-partition.
So I decided to clone W10 to the free space using Easeus disk copy. (Successfull). Now i wanted to boot the clone, remove the old one and add the free space to the cloned W10. But i am unable to boot the clone. I can't chose the partition to boot from. What went wrong? there are 2 identical partitions with W10. How I can solve this without reinstalling everything?
When I first got my PC I installed RAID 5 across it. I stupidly gave Windows 30GB and the rest as storage. Big mistake I know. Now I have no room at all to update windows and cant figure out how to extend the size of the partition. I would prefer to make a fresh install and give windows around 100GB and keep the rest for storage.. How would I come around to do this without losing the storage contents
I was messing around with partitions and created a test partition that was unfortunately the same size as my EFI partition. I went to delete my test partition, but deleted the EFI partition by mistake and now my computer won't start.
OK, so, I finally got the install for Windows 10, and boom, it restarts into it's happy special circle with a percentage, explaining that it's this many percent done, I step away, and when I come back a couple minutes later..
I was trying to install windows XP in a dual boot with Windows 10, so I created a 40 gb partition and tried to install Windows XP onto it. When I booted up the Windows XP install disk it couldn't find the partition I created because the partition didn't have the proper ntfs header that would have given the drive a Letter (like how the C:// drive is). I then tried to boot back into Windows 10 to use disk manager to format it, but since i inserted the Windows XP disk, Windows XP already overloaded Windows 10's bootloader. So basically i could boot anything. I tried to format the partition with gpart, didn't work... Kept formatting ntfs but without the letter. Tried using Ubuntu, kept giving me errors... I still can't boot into Windows 10 because windows XP overloaded the Windows 10 bootloader. And I can't install XP (on the separate partition ) because it isn't mounted with a letter. The only way that I found to fix this is to find a way to install XP (<--- that's the part I can't do ) then to use a special software on XP that will let me have a multi-boot system, and will fix the Windows 10 bootloader.