I have a pavillion G62 notebook. I recently switched to windows 10 (64 bits). after I made the switch from windows 7 to windows 10 I couldn't duplicate my screen. in settings windows won't detect my screen. I updated the amd graphic card driver, but that didn't change anything.
View 1 RepliesWhen I pair laptop and Bluetooth headphones Urbanears Plattan ADV , my WiFi connection is lost I have visible network in notification area but I can't connect : msg - "Can't connect to this network". I solve problem with restarting router but that's not good.
Windows10 , HP Pavillion notebook
OS: Windows 10 Home, 64-bit
PC: HP Pavillion g6 notebook
Network adapters: Ralink RT5390R 8-2.11bgn Wi-Fi Adapter (Date: 5/18/2015, Version: 5.0.57.0), and Realtek PCle FE Family Controller (Date: 4/01/2015, Version: 9.1.401.2015)
Problem: Every once in a while, I'll lose my internet connection. When I click the wifi icon on the taskbar, there will be no networks listed. The only way to fix the problem is to go the Device Manager, disable the Ralink Wi-Fi Adapter and then re-enable it. This fixes the problem anywhere from a of couple minutes to a couple of hours, then it happens again.
Solutions I've tried: I've tried doing a system restore but it failed and there are no more restore points. I've tried uninstalling the Ralink driver, downloading a new copy, and reinstalling it.
Yesterday i installed Windows 10, all was fine, but after hour of working, i saw that my wifi connection goes to limited and i don't have internet acces. I need to disconnect and connect and it works for 30-45 minutes, and then again go to limited. I have windows 7 before, and there i don't have this problem, but when i tried windows 8(half year ago) i have same issue.
I have Hp pavillion g7-1307sm laptop.
Motherboard: HP 1672
I think it's maybe problem with my network adapter driver( Broadcom 4313GN 802.11b/g/n 1x1 Wi-Fi adapter ), because i think it's old. It is from 15/08/2012. Version: 6.30.59.49
I am trying to do a clean install of windows 10 on a new SSD on an HP Pavillion purchased in 2009 or 2010. I am booting from a DVD. All is going well in the beginning of the install. I get past the product key verification and partition section. Once it starts copying the windows file during the install it has been giving me the following error message and stopping the install:
"Windows cannot install required files. The file does not exist. Make sure all files required for installation are available and restart the installation. Error code: 0x80070003."
It has made it to different percentages of copying files before it gives me the error. Once I believe it made it almost to 100% and then gave me the error.
I have since re-downloaded the ISO twice onto different discs with no success. Have called microsoft support with no success. Tried booting from USB but the computer does not seem to support it. Tried updating bios but no newer versions were available.
I just installed W10. I am experiencing several of the issues posted by others - Defenders, etc. However, I have not seen these two issues.
(1) When I try to rename a file (F2) in Explorer, the file renames but the screen does not refresh and show that name. I have to exit the folder, then reenter that folder. This also is required if I "move" a file from one folder to another - including to the recycle folder.
(2)I was able to open Word without any problem. When I tried to open Excel, however, it froze ("not responding"). I reopened it in "safe mode" and it displayed a blank spread sheet. I keep my files on a USB drive (connected and read by Explorer) and Excel is defaulted to open to that drive. But in safe mode I need to use "Explorer" to access them. So, I click on the "My Computer" icon in Excel and ... "not responding."
I have a Microsoft account set up with a pin. Every time I boot my computer up, I am greeted with the login screen and my photo, with the message below it, "We are unable to connect right now. Please check your network and try again later." And it's asking for my password, not my pin. For some reason, I see my username twice on the lower left corner. One is the password log-in, the other is the pin. I can successfully log in with either. I just want to know, what is with the error message? I've got a connection, so I can't figure out why.
View 6 RepliesIs there any unique registry or other method that I can classify this is surface pro using Windows 10 Pro/Home and Notebook/Desktop using the same OS?
View 2 RepliesWhenever I connect my acer aspire v5 572 running win 10 connects to external media like printer or mobile .. It freezes and show me page fault in non paged area ..
View 1 RepliesWas just setting up my new HP Pavilion x 2-10-n107a notebook/computer when I finished up locked out.No keys were responding so I clicked on :Other user: and everything worked ok until I came to switch on again and when asked for other user password and name I had not a clue.
View 3 RepliesAll audio coming from my notebook is heavily distorted, no matter the volume. I went to my Realtek drivers and checked for updates, but nothing.
View 1 RepliesI have a hp 2000 notebook. but when i try to watch movies the picture freeze. If I want to play music it does not want to open....
View 1 RepliesI own an "HP 15-f010dx Notebook PC (ENERGY STAR)." I recently upgraded my computer from Windows 8 to Windows 10. Ever since then when my computer goes to sleep mode I cannot turn it back on I as was able to do with Windows 8 by clicking or using the touch-pad. I know the computer is on because the light for the Internet on the keyboard is on, but it never gets out of sleep mode. I've tried changing the power settings, but to no use. The only way I can turn the computer back on is by holding the power button for about 10 seconds, shutting down the computer, then pressing it again to turn it back on. It's really annoying when all my apps get shut off and I have to open them all again because of this.
View 1 RepliesSince 2 or 3 weeks when I switch on my notebook, after loading my desktop it hangs loading startup programs.When it hangs, I can't even shut down, I have to press the power button 4 seconds to shut down.It happened with my 3 notebooks, but it remains only in one of them.This problem remains in an HP EliteBook 8540w running Windows 10 Pro 64 bits. In this notebook I had uncheck the "Turn on fast startup (recommended)" when I installed Windows 10, because it didn't shut down properly.I don't know what to do, I tried SFC and DISM tool, both found errors but were unable to correct them.
View 5 RepliesJust upgraded a Samsung Notebook from Windows 7 to Windows 10, keep getting "This application does not support this version of Windows" message regarding Fast Booting, tried compatibility fixes and turning the application off but the messgae still keeps popping up?
View 3 RepliesI'm running Office 2013 and Windows 10. I also have my own personal Office 365 account.I have been using the Windows Store OneNote app with my personal Windows Account OneDrive since Windows 8. I now want to transition everything to my OneDrive for Business account.When I use the Windows Store OneNote app and try to add the OneDrive for Business Account, after I enter my login credentials, I just get a blank popup window with the "#" in the upper-left interior of the window. All I can do is close the window at that point.
I tried entering a wrong password, just to make sure that it was properly checking my credentials and that test passed, so it is definitely not a password issue. I authenticate, but then nothing is displayed in that popup window for me to complete the addition of the new account.Of course, if I use my Office 365 OneNote app, it works fine, no issues. But when I use the Windows Store OneNote app, that's when I get the problems I describe above.
The Desktop version, OneNote 2013, also works fine with my OneNote for Business/Office 365 notebook.Is there something I am doing wrong not have not setup correctly?
[URL] ....
I am using a Lenovo E530 notebook with a Kingston HyperX SSD and i updated from 10122 to 10130. When the install finished, i restarted my computer and since then i cannot do anything. Windows goes in an infinite loop. I see the windows logo, and it instantly restarts, then it says automatic repairing, and it restarts again. This thing goes forever.
Seems like I am not the only one getting this..
I have a Lenovo G580 Notebook with Windows 10 installed. The issue is that the Windows hotkeys, that is Windows key and other letter combinations, aren't working. For example, normally, if I press Windows key + I, then the Settings app should open up or if I press Windows key + R, then Run should open up. But the Start screen opens up instead in all such cases.
This is happening since I have updated the Synaptics touchpad driver via Windows Update. If I uninstall the driver, then the hotkeys start working again. But as soon as I install the driver, they stop working. This was not happening with Windows 10 before, even when the Synaptics driver was installed. It has suddenly started happening couple of months ago. Also I cannot completely uninstall the Synaptics driver because my laptop came with it itself nor can I stop the driver from updating as it is an important driver and it needs to be updated to be compatible with Windows 10.
My HDMI Cable is not working on my Asus Notebook after I did the Windows 10 update. I have tried fixing the sound and resolution on control panel, i also made sure all updates and installation of apps are up to date, however, the TV doesn't seem to recognize the cable anymore, or the computer.
Tried changing the settings on the TV as suggested on one of these forums. I must be missing something.
I have a notebook with nVidia 860m video card. There is GeForce Experience preinstalled and it recommends to update driver. Problem is: Win 10 does not recognize 860m after rebooting my system when I install nVidia's fresh drivers. I don't understand that sort of problem because I always updated drivers on win 8.1 without any problem, win 10 is updated regularly. So if I am interested to install recommended updates, is there a way to understand will it work or not after reboot without actual install? I tried to installed drives via devices manager, it is installed without any problems but does not work after reboot.
View 9 RepliesMy HP Pavilion dv7 Notebook PC has recently had some issues, so I had to reset it to factory settings (Windows 7) and then upgraded again to windows 10. Now my fingerprint reader is not working, I do not have windows hello on my laptop at all, and I can't even find it as biometric devices in my device manager. can I do something to make it work?
View 1 RepliesI am on windows 10, tried to map my NAS using map network drive but says "Windows cannot access Nas102 check spelling or might be problem with your network. Next, I tried to map a specific folder inside Nas102 and it worked! For example Nas102Music I also tried to make a fake folder name and map that for example, Nas102FakeFolder and the error said check spelling of "fakefolder" Nas102 was detected but not the fakefolder. trying to connect to the whole NAS instead of just mapping individual folders inside of the NAS.
View 9 RepliesComputer: HP Elite 8000 C2D E8400 Win 10 64 Bit 4GB RAM .Windows 10 upgrade from Win7 installed. Have installed Office 10 and Chrome. Microsoft edge default browser.
Problem: When I click the "Search the web and Windows " box I get "We can't connect to web search right now but you can still search your stuff. Make sure you are currently connected to the internet."
I am connected to the internet and if I type a "web question" into the box it opens Edge and give me the answer. Edge stopped working so I reset it with "Reset_Microsoft_Edge" from this forum, now it is working again, but I have this new problem.
After updating to Windows 10 I cannot sign in to a Microsoft account, look at the Store or do anything that requires connection. I initially thought it was something wrong with my connection to the WiFi but my browser can connect and download from the internet fine and I am writing this on the same laptop.
View 2 RepliesI recently updated from Windows 7 to windows 10 and now i can't connect to the internet. Someone suggested i update my network adapter driver but i can't do that without an internet connection
View 2 RepliesCompleting a windows update. Cant get out and can't connect to Internet.
View 1 Replies