Performance :: All Video Formats Slow To Load And Play
Jan 28, 2016
No matter which video player I use, nor which video format I am trying to play, the file hangs sometimes for several minutes before finally playing. Sometimes I have to manually close the program and start it again because it just takes too long. This seems to be happening with all video formats, all players. Got me stumped and it is very annoying. These are files stored on my hard drive, but it is also happening with streaming live video from the internet. I usually have to stay connected to the video site for several minutes before it starts to play.
I've upgraded my laptop from W8.1Pro to W10Pro. At first everything was fine, but now the boot is very slow with the icons taking ages to appear on the desktop and the taskbar. I've removed almost all the automatic start up items, defragged and reinstalled the graphics driver.
After upgrading to W10 from W8.1 (which went trouble free) when my laptop is powered completely off and I turn on the laptop, after the Acer splash screen the video stops working. Windows continues to load just no video.
IF I go into the bios during startup and just exit out of it, W10 starts normally, with video. It will also reboot with no problem, no video loss, only when the laptop is powered completely off.
I tried going to the Acer web site and downloading their W10 drivers, made no difference. I installed the latest bios.
Having recently updated to Windows 10, I am astonished (annoyed) to discover Windows 10 does not play WMV video files, particularly those created using Windows Movie Maker. There doesn't seem to be very much advice on this on the net and the following is short list of the tried and failed suggestions:
Turning on/off WMP through Control Panel>Programs>Programs & Features>Turn Windows Feature On or Off.Repeating the above then restarting my laptop twice, after which running sfc/scannow at the Command Prompt.Disabling / enabling "Turn on DirectX Video Acceleration for WMV files" in WMP Options.Troubleshooting Fix via Control Panel>All Control Panel Items>Troubleshooting>All Categories>Windows Media Player Settings - this just returns the message "Configuration settings might be set incorrectly" - but doesn't expand on what settings are wrong.
I also came across this "FIX: Update to enable DirectX Video Acceleration (DXVA) of Windows Media Video content in Windows Media 10" at [URL] .....
However after downloading the 'fix' (Download the WindowsMedia10-KB888656-x86-Global-ENU.exe package now.) it doesn't install - instead I get the error message "Not enough storage is available to process this command".
I know that there are third party free WMV players available, but I liked WMP and cannot understand why it won't work on Windows 10.
I have an HP Split X3 Tablet/Laptop (13-m110dx) that I just recently updated to Windows 10 Pro.
All is going very well with it except video playback from anything such as Plex or YouTube. What happens is: The video will start but will just keep looping the first second of the video while playing really choppy sound.
I have done the following: Installed the latest drivers from HPInstalled the drivers that were used on Windows 8.1Uninstalled all Windows UpdatesDid a clean install of Windows 10 Pro
I'm suspecting that it is the 'Intel Chipset Installation Utility' that is messing it up.
I'm using an Intel SSD 240GB 520 series. Always loading very fast, i.e., about 8 seconds from cold boot.
Since windows 10 is installed, boot time is about 20 seconds and desktop icons take some time to refresh and load their images.
Regarding the boot time: I've narrowed it down the an unexplained read/write access on my external HDD eSATA which is used for backups, though currently all backup process are stopped.
When I remove / turn off my external HDD, boot time is about 8 seconds. I can't figure out why all of a sudden it required this access to this HDD.
Just downloaded the new "free" Windows 10 and found that I cannot play videos or DVD's. Had Windows 8.1 previously and was able to find a fix but no luck so far. I don't want to spend $99.99 on Windows Pro which is what Microsoft says is what I need to do.
Unsure what is happening here, for a few days now, when I load a youtube video, all I get is a black screen, and I do not see the video until I 'nudge' a few keys and throw mouse at screen (not really!)
Whilst this is happening I went up to 200mb last night from 150, so its not my broadband.
The image shows screen after approx 20 secs; the buffering circle only appears after I hit spacebar or enter. Thats does not mean I get the video though, it can appear now, or in another 30 sec or more
why windows media player 12 wont play YouTube video's, it plays the audio side but not the video of it..I had windows media player 11 in before the windows 10 update and now media player wont play the videos only audio.
I am running Windows 10 1511 10836, having upgraded to Windows 10 from Windows 7 back in August 2015. This morning when I turned on my Lenovo B575 laptop, after the first Windows screen with animated circling dots at the bottom, when it refreshed the screen and went to the 2nd Windows screen, I noticed that the animation with the circling dots was slow. After several minutes, the computer was still on this screen. After 15 minutes and no change, I restarted the computer.
Upon 2nd startup I got the same results. On 3rd startup I got the Please Wait screen and then eventually got to the Startup and Repair screen. After diagnosing found nothing, I then went to the System Restore page and found that a Windows Update had installed yesterday afternoon. I restored to the Restore Point created yesterday, and restarted.
(Last Thursday I had to force the upgrade to the 1511 10836 update by downloading the 3.5Gb file because Windows Update kept failing. I have had no problems since then.)
No change. I can get to Safe Mode after 2 failed attempts, but without knowing what to check or look for, this does me little good. Of course can I reset/reinstall Windows 10 but would rather not if I don't have to.
So I restarted my computer and router because my internet was being slower then usual. After I restarted my computer it took almost 30 secs to show the log in screen, that's the longest it's ever taken. After I log in it takes about 3 mins to load an application. Even when I attempted to open my windows setting it's slow. My computer is a gaming computer with an i7 and a gtx 970 with 16 gigs of dd3 ram.
After upgrading my win 7 to win 10, how do I now play or show my video files I had stored in my hard drive? When I go to my video files I can't play as I get a "Media Player" ad for an additional cost to view MY files. Why? Do I no longer have a working Microsoft Media Player program or what do I now have in wind 10?
I know they're promising native MKV support. I'm hoping this means I can stream straight to my TV or Xbox by right clicking the file and choose the "play to" option but I don't ever remember this being confirmed.
When going to the following page, there is a video, it plays in Chrome but not Internet Explorer 11 or Edge, what plug-in is actually used and how to fix it as it's the same reason moji's are not playing in skype.
[URL] ....
When I try to play the video, it will show the same GUI as the one in Chrome below except it doesn't play in IE or Edge and comes up with a error ....
Since updating my Hewlett Packard 700-060envy desktop my HP DH16AC-SHR player will not play any video content. It displays text material OK, just NO video content. The device worked fine until installing WIN10 update 1511-10586.71.
I recently opted for the free Windows 10 upgrade (still debating if it was worth it) from a Windows 7. Long story short, there was a new problem every day so I just wiped everything and did a clean install hoping the old windows 7 files would stop clashing with the new windows 10 files. All went well and was working fine when boom my speakers start acting up. Don't know what I did to trigger it, it just started doing this.
Basically, when using my USB connected headset, everything runs fine, sounds nice, no problems. When I change over to my desktop speakers though, all audio and video goes into "slow motion" and makes obnoxious sounds. Computer doesn't lag, just audio and video for YouTube, games, etc.
I've tried reinstalling drivers via device manager and it says it's all up to date. I just tried installing Realtek audio driver manually and now it won't even play sound through the speakers. I know the speakers are fine because they sound beautiful when plugged into my ps4.
Update: After installing Realtek and doing a restart, the speakers are in fact making sound, but now it's also extremely quiet and scratchy. Had to crank it to max just to hear anything.
Update: May have fixed my problem, at least temporarily.
I went to device manager and deleted the speakers then restarted so that it would auto reinstall them. Seems to work fine again...
Update: As I had guessed, it was only temporary. Sound and video just started going all slow motion again. Back to square one and back to the drawing board...
Is there any way to change the automatic format that Windows 10 saves all the screen shots in from .png to something else like either .gif or .jpg?
Also, is there any way to pin the Snipping Tool to my Start Menu in Windows 10? I have an option to pin it to my task bar when I right click on the icon when I have the tool launched but there is no option on the right click menu to select for pin to Start Menu. I am also wondering where it is located in my system because my start menu list doesn't have an "accessories" group in it the way Win 10 or XP had.
I started experiencing this after my brother installed some malware on my pc while playing CS GO. I have removed all the malware i could find and have ran memory and disk tests which have shown me nothing but positive results, but when i run furmark the disk usage climbs to 100%. I also have noticed my nothbridge overheating which might be the issue. I also have a shady 600W psu that needs changing because it is old and I don't trust it.
I have
CPU: intel i5 3330 GPU: Nvidia gforce gtx680 refrence RAM: 8GB kingston value ram PSU: 600W super cheap generic psu that came with the case HDD: wdc wd5000aakx-001ca0 500GB that needs changing MOBO: msi MSI H61MA-E35 (B3)
[code]...
Edit:I found out the reason for my hdd stopping while under load was that one of my 6 pins was a 2molex to 6pin adapter and one of the molex cables was also the one powering my hdd through a sata power cable.So i plugged in a different one and now it's fine.
I just upgraded to windows 10 and one of the things that bugs me is the file explorer on task bar load very slow. It takes around 1 seconds to load if I click on the explorer on task bar. However, if I use the win+E button the explorer open instantly.
I tried to create shortcut from the file explorer exe in windows folder and the time it take to load is about the same with loading on task bar.
Asus UX305F laptop I bought last week. It's working fine apart from a couple of things:
- When the battery is getting low, say from 10% and down, the performance drops dramatically and everything, particularly the internet, runs so slow that it's almost impossible to use until I reconnect the charger. I've changed the on-battery power settings to match the performance settings when it's plugged in and it hasn't made any difference.
- When I'm using the laptop in my bedroom which is adjacent to the living room where the WIFI signal is coming from, the connection is extremely slow, much slower than my mobile phone for example. In the living room I average about 50mbps whereas in the bedroom I'd be lucky to get 20mbps though my phone can get about 40mbps in the same room.
So in my bootlog i have a dozen of BOOTLOG_NOT_LOADED lines as seen in this screen shot of my bootlog...
These errors are causing my load times to go on as long as 3 mins and alot of sitting at a black screen, also safe mode is a bit better and often results in getting past the black screen alot faster.
I do have a recovery disc for a last resort.But as you can see these go on for quite along time and carry on going like this for the next 3-4 thousand lines .
I'm a huge fan of the Windows 10, I love it, however recently I've gotten my first glimpse of the buggy side. The computer (pretty decent) is taking a very very long time to shut down. I just let it be, maybe update or something, however it kept doing it. After a few days I checked the event viewer, and I had quite a few of errors.
The main error (that I think, I'm no computer expert) that is causing this domino effect is a distributed error, CLSID and APPID. I've tried many solutions out there, and none seem to work.
Upgraded from win 7 Pro x64 to Win 10 Pro 10 days ago,, first week startup was perfect, then something happened, an upgrade or external program, don't know.
Have read in other forums to run DSIM.exe and found some errors, but didn't know what to do..
Normally when i use the net all is fine. Noticed today when i run a video convertor programme in the background the loading of web pages is extremely slow. Stop Freemake video convertor and page loading is normal speed. I assumed it was memory, did memtest and no errors found. CPU monitor sits on 100%. Had similar problem with Villisoft last week. Time for a new CPU methinks but having said that would 100% cpu usage slow down webpage loading to that degree.
I have an HP Envy i7 laptop which came with a 1TB hard drive. As there was space to add a second drive I added a 500GB drive. In addition I added a 320GB drive in the DVD slot (using a dvd/disc converter cartridge).
I have recently noticed that disc access in Explorer has become really slow (seems to think about it for 10 - 15 secs sometimes) and loading programs seems to take longer too.