I was trying to do a system backup on an external hard drive in windows 10 and once it started i noticed that it was creating a backup for my old Windows 7 64 operating system. How do I get it to back up my current Windows 10 system and all of my files on the C: drive.?
View 6 Replies
I have 2 laptops, both using Win 10
Can I use Win 10 backup app to enable me to back up both laptops to one external hard drive?
My PC performance with Windows 10 is very good except when it isn't
One of the things that is perplexing me is that my external hard drives seem to be impacting my startup performance. Following start up Task Manager performance tab shows one of my external drives (G) working at nearly 100% and the noisy disk drive suggests that it is working hard. The disk transfer rate also indicates movement between the PC and the drive. This is despite Drive G being used only as a storage/backup device with no automated actions configured. Yesterday Drive G became very hot as a result.
If I disconnect Drive G, my second external hard drive Drive F takes its place and task manager shows the same activity as previously shown on G. If both drives are connected F shows no activity.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 RepliesAll drive in explorer appear as "Local Drive".. I want to rename them "Drive_A", "SOFTWARE", "PHOTOS", etc. but can't.. Is there a way?
View 3 RepliesI have installed the latest build 10158 and have the same problem that I have had in previous builds,i.e. that my external drive is not showing despite being listed in Device Manager as installed and working correctly,have tried disabling re-enabling,uninstalling etc.etc. with no effect.
View 3 RepliesWindows 10 did an update on my wife's desktop that was incompatible with the Nvidia graphic drivers on it. As a result, the dual monitors no longer display. We took the computer to the local Microsoft store and they were fully aware of the problem and are working on it. But, after two weeks, the problem has not been solved. Meanwhile we bought a new desktop and had Microsoft empty the entire contents of the C: drive onto an external hard drive. They did and showed me that the external drive contained the root directory and program data that contains years of work using Lightroom.
I brought the external hard drive home and connected it. Luckily I can see the User Libraries but not the Program Data. Is there some way that I can make everything visible in the external hard drive so that I can copy the contents to the new desktop?
If I do a fresh install. What are some safe online sites I can back up my files? Drop box or one drive?
View 9 RepliesIn the past few days my external hard drive makes the sound (windows notification) like when I unplug it from my desktop. Then about 5 seconds later I get another sound and notification asking me how I would like to view content for G: (my external hard drive). I only have it attached to use for backups and I've checked my back up program (easeus) and my backups haven't been happening either. I used crystaldisk to check it and it's healthy. Why it would be essentially shutting itself off and on?
View 9 RepliesI have a 3TB external hard drive plugged in to my pc. I use it to stream movies and music to a couple of media players in the house via our wifi network. Recently it has disappeared from my view on the pc. When I plug it in via usb, nothing happens, yet when I plug it in to my daughters laptop it is recognised, leading me to believe it is a setting problem with my pc rather than a problem with the hard drive. How to make it work again.
View 9 RepliesI cannot get my external hard drives to give me write permissions over my local network in some directions.I recently replaced our hard drives with SSDs and with the reinstall, I had some difficulty getting the permissions on my external hard drives working correctly.
I did several Google searches and read a procedure that I needed to go through adding a user called "Everyone" to each of my drives that I wanted to access and share. I did this and gave "Everyone" full read/write permissions and also went into advanced options (or wherever it is) and chose the checkbox to give all child files and folders these same permissions. It took ages but eventually it all seemed OK.
I had one folder which could not be corrected this way and ended up having go change each file individually. Anyway, I thought I was all set but if I try to move a file from Machine A to Machine B (the drives are attached to , I get an error that I don't have permission to do this. No overrides or Admin permissions are an option and when I check the specifics it *is* correctly shared with not only Everyone but this machine as well (so it attempted to fix the permissions itself at some point). However, if I go to Machine B and grab the files from Machine A over the network ...
When I plug my external into my pc it tells me it's unable to use and to format the drive. So I try to do so, and Windows tells me that there's a program using the external drive.I attempt to format anyway since I know there's no programs using the drive, and after a minute the formatting comes to a stop and I get a message saying it's unable to format. I've tried formatting it via 'This PC' and DIsk Management in Windows 10. Tried Quick Format as well and nothing is progressing.
View 9 RepliesI have an external hard drive that I have used regularly with a Windows 7 machine via esata
that does not show up when plugged into my Windows 10 notebook via USB.
I can see it under the disk management, but there is no drive letter assigned so I cannot access it.
I purchased a 1TB hard drive to place media files on it so that I could plug it into my DVD player which has a USB port. I made sure to format the hard drive to Fat32. What I can surmise is that the 1TB hard drive is too big for the DVD player to read. I plug it in and it says Device Not Supported. But I've successfully plugged in an external card reader and used a 16GB SD card to place files on and it reads them fine. So I'm thinking it's the size of the drive that is the issue.
I might have to partition the hard drive into two partitions. One partition 16gb and then the other partition with whatever is left. They did say they were not sure if there was a way to set it up so the 16gb Partition is what is recognized first when plugged into the DVD player. This way I would transfer movies I want to watch to the 16 GB partition, and transfer them over.
Now when I search hard disk partitions in Windows 10 the manager comes up and I can see the hard drive, but I can not change the size to partition it. It's grayed out. Is there a freeware program that works with Windows 10 that will split the hard drive into two partitions in sizes I specify, and make sure that the 16GB partition is the first one loaded or seen? And if I set it up that way when I plug it into my computer will the computer see both partitions?
I'm trying to change the name of my External Hard Drive as it appears as Local Disk G on my laptop. However, upon trying multiple times it keeps on coming back as Local Disk G.
View 9 RepliesI have an external hard drive and when i try to open it, it says access denied.. when i try to see the ownership, it says unable to determine owner.
When i try to change the ownership through various methods like cmd prompt take own or by going to the properties of the drive, it says unable to set new owner, access is denied...
My external hard drive is showing an error.
G: is not accessible.
The disk structure is corrupted and unreadable.
How to fix it without formatting it? Have a lot of file on there that I'd like to recover if possible.
I have a Seagate FreeAgent GoFlex Desk 2TB USB 3.0 external hard drive that I use to store (majority) videos and documents. A few days ago it started giving me this error for every folder and file, and eventually just from trying to access the hard drive itself from This PC:
And this is what shows up in Device Manager:
In Disk Management, this is what shows up at first (first image) and then when I refresh Disk Management through Action > Refresh (second image):
As for specifications wise, I clean installed to Windows 10 Pro N x64 (a day after this error came up when I plugged in the hard drive, actually... Not sure what I was thinking at the time) with what I think are updated drivers for my hardware from the manufacturer's websites. Previously, it was a clean installation of Windows 10 Pro x64 after upgrading from Windows 8.1 Pro x64.
Not sure if this is worth mentioning, but, all my folders and files show up when the computer actually can read the hard drive, I just can't open any of them. I've never had to deal with hardware problems before. I really don't want to lose the files in that hard drive, as I'm not able to make a backup even if it was working (with it being my biggest external to date).
This is what the hard drive shows on Speccy at a glance:
(Is the serial number and firmware version supposed to be the same on all hard drives? )
I recently bought a Dell XPS 8700 running Win 10. I still have my old computer, a Dell Inspiron 530 running Win XP Home 5.1.2600. I made a clone (i.e., a bootable drive) of the old Inspiron 530 hard drive on a Seagate Expansion portable drive with a USB interface. I want to plug the Seagate drive into my new XPS 8700 and boot from the Seagate drive, thus starting up and running Win XP and accessing all my old apps and files. When I am done, I want to restart the XPS 8700 and start up Win 10 as usual. My XPS 8700 with Win 10 is running just fine.
My purpose is simply to physically throw away my old computer and yet continue to use my old computer in a virtual sense by "hosting" the same functionality on my new computer. I realize I will need to restart my computer when moving from Win XP back to Win 10, and I realize I can't within one environment access files in the other environment. My immediate problem is I cannot get to a screen that lets me boot from my Seagate drive. (I might run into other problems after that.)
I just got a new computer with Windows 10 (Jury's still out) and am trying to access my Buffalo external hard drive from it (i believe it is a NAS. It lists on my desktop as LS-CHLD2F). I disabled windows media player cause I don't want to access it through that (screws everything up). I also installed the Buffalo disc on the new computer but that didn't seem to solve anything. I would like it to show up in my network but just don't know how to get it there and obviously don't want to reformat my hard drive. I just want it to be seen. All of my work is on there and need to access it as is.
Update: I am now able to access it from the desktop but still isn't showing up when I go to File Explorer then Network. It is a Linkstation.
I connect my USB 3.0 external hard drive to my laptop and it works but after a few minutes of not using it the disk stops spinning and when I to use it again my computer locks up and after 30-60 seconds it disconnects and reconnects some times. Else I have to pull it out. If I use the drive without a to long pause in between it work perfectly fine but as soon as the drive stop spinning and has to spin up that is where it happened. that feature in the power options turn on where the power to usb does not turn off.
I will look to see it I can change the hard drive shutdown time in properties.
Basically i lost everything on my external HDD & the only way to get the drive working again was to format it, That fixed the problem the drive was having (Unknown why data got lost) but if i disconnect the drive & reconnect i get message (the drive is inaccessible & corrupted) Something like that cant remember the wording exactly as its not happening right now, but i know the problem will come back & i will once again lose all my data, as its happened 5 times over 2 week period..
If i restart the PC, after startup its the only drive that's not visible either in (This PC), (Disk Management) or in (Device Manager) which leaves me with no option but to disconnect & reconnect the drive in order for it to be visible & Accessible, Now sometimes it works fine but once it becomes inaccessible it stays that way unless i format it Losing all data once again ...
Relevant Information of Drive
3 Years old
On 24/7 (As i never turn PC Off)
Its a Iomega eGo 1Tb External HDD
I Used software Hard Disk Sentinel & it says the drive is Healthy & in good working Condition
I need to open my external hard drive. It reads in the computer but it won't open.
View 1 RepliesI upgraded my windows 7 computer to windows 10. I have an external hard drive that I am unable to open. When I connect it to the computer now, a reformatting window pops up asking to do this. Obviously, I don't want to delete the data on there as I used this drive as my backup. How can I go about opening this drive?
I checked on someone's else computer running windows 7 and my data is there, but my friend upgraded his computer to windows 10 and now I can't transfer data that way.
The hard drive is a WD Scorpio, model WD25000BEVS. Don't know if that is useful. I am wondering if part of the issue is that I have this harddrive is from a previous laptop that ran windows vista. That computer failed bcs it was a subpar HP product. I literally baked the motherboard several times for it to work. I finally gave up and got a new computer but kept the drive. I should have reformated it but I only deleted everything but the user folder.
I am wondering if part of the issue is ownership of the drive. I know that when I first used this drive I had it take ownership of the hard drive. I know this can be done in window 10, but I can't seem to ever open properties of the harddrive while its plugged in.
The power went out while doing a Windows 10 update. I purchased a USB to SATA connector, connected it to another Windows 10 PC's USB port. The external hard drive that I removed from my other PC is not showing in Windows File Manager.
View 9 RepliesI just trashed my old computer and built a new one (moved from Windows 7 to Windows 10). I had quite a few files I wanted to keep, so I stored them all on an external hard drive. I can play the video files in question from the external hard drive, but when I try to copy the files to my internal drive (so that I can store my external safely) the transfer rate quickly drops to zero and then after a few seconds a pop up tells me that the file cannot be found. I know this to not be true since I can still play the files.
View 1 Replies
