I am in of a "Free Back/Recovery Program" that is so EASY as pie to understand. I want to backup my pc and also be able to restore and all of this has to be easy for me to run it. I will be backing up onto my external harddrive.I have tried Acronis True Image and to hard to recover back my partitions and etc..
View 9 RepliesWindows10 Recovery USB Media/Drive - Control Panel ( Backup & Restore )
I have upgraded to Windows 10 from Widows 8.1 (pre-installed) , on my "ACER Aspire E1 472P- 6491" laptop by taking advantage of the free upgrade offer and successfully activated Windows 10 . I do not have a Windows (8.1 or 10) product key , as the Windows was pre-loaded on the laptop .
Now I want to make a " Windows10 Recovery Drive ", which can be used later to boot/re-instal Windows10 in case my Laptop fails to boot or to reset/troubleshoot any problems on Windows10 . Accordingly I tried to Create Factory Default Backup via Control Panel ( Backup & Restore ) option, but I found that it is meant for Windows 7 or 8.1 only ( which means that the system can be recovered back to Windows 7 or 8.1 only - not Windows 10 ) .
Why Backup & Restore is meant for Windows 7 only , when I have upgraded to Windows 10 already . In fact I have upgraded to Windows 10 from Widows 8.1 ( not Windows 7 ), then why it is taking me back to Windows 7 ? Can I not create a Recovery USB Media/Drive Backup for Windows10 for future use , after I have upgraded to Windows 10 ? If not , then how to make a Windows10 Recovery USB Media/Drive .
a) After upgradation to Windows 10 , why Control Panel ( Backup & Restore ) option is meant for Windows 7 ( or 8.1 ) recovery .
b) How to create Windows10 Recovery USB Media/Drive Backup that will work to boot/re-instal Windows10 in case my Laptop fails to boot in future .
Upgraded to 10 yesterday. Any way to make a Windows 10 recovery CD?
View 8 RepliesMy wife is thinking about upgrading to windows 10 BUT she gets this message to please be sure to update to the latest version of Dell back up and recovery before upgrading to windows 10..My question is how does she know if she even has this program and is it really necessary for her to do this?P.S. she is running windows 7 right now..
View 1 RepliesIs there a program that will backup windows 10 files and settings like windows easy transfer that was in windows 7.
View 4 RepliesI have a Dell Inspiron 17R laptop that came with Windows 8. I downloaded 8.1 and used that since 2013. I am now using Windows 10 and it has been it good transition until the last update. I keep getting messages about dell backup and recovery not being compatible with this version of Windows (Version 1511 (OS Build 10586.11). I would just like to unstall the Dell application since I do not need it. I have a backup of my system should I need it in the future.
View 4 RepliesSo I've completed the upgrade from 8.1 pro to Windows 10 pro. I want to do a clean install so I went to control panel to create a recovery drive. After clicking next through the first screen it appears to search for eligible drives to backup to (I'm just assuming here, and I do have a 32GB USB drive plugged in), then just gives up and says it can't do it. No explanation of what went wrong. So I guess no clean install for me..
View 6 RepliesWill I be able to roll back to Windows 7 from Windows 10, using Windows Recovery Disc which I made as a Backup for my Hp Pavillion. I know this question may sound silly, but has a point in case Windows 10 doesn't have certain features which I m using on my PC currently e.g Remote desktop.
View 1 RepliesWe were all excited to get Win 10 and did a clean install, and finally after some time got everything worked OK. At least for my Lenovo Y40-80 it took some time. Now that I am adding software to focus on using most of this laptop. I wanted to make sure I create a system image that is this time in Win 10 to restore if something messes up in the near future.
However, this was a win 8.1 pc and never had win 10 restore in its restore partition that is the built-in Lenovo Restore & It has no CD/DVD Drive to create Natural Win 10 Repair Disc to boot from. So I am trying now to create a "Recovery Drive" on an external USB to keep however since I can't create a Win 10 Repair disc without CD/DVD Drive, how am I going to have access to this Win 10 backup if I have to restore to this point??
Finally I also don't have any clue that; even if I took the risk, and restored back to original Win 8.1 - is it going to be possible to pass again to Win 10 clean install.
Will it be possible without any Win 10 key? What key it passed on to when it did clean install to Win 10 this past september when I did my free upgrade...
How to manage to create a win 10 native backup and were able to restore it without having to go back win 8.1 partition.
I am puzzled by the term backup when you go to Settings > Backup.
I have a folder on my NAS defined as my backup drive.
I have set the time interval to every ten minutes until I am sure of what is being backed up.
Does the backup process store MY files as opposed to WIN 10 files in that folder and could be used to restore them if I had to re-install Win 10?
Just bought a new Windows 10, Office 2016, Ultra HD Lenovo computer. Already having issues, surprise surprise! Not only are there scaling/blurry issues with some apps, but Windows Backup and Restore is displaying the following error:
The semaphore timeout period has expired.
I'm trying to backup to an external Seagate drive.
I've tried several fixes as I was previously having this issue too ([URL]), but nothing has worked.
Jan. 3rd 2016 I have a 931 GB external HDD using a brick power supply and connected by USB. I wish to do weekly backups to it via Start/Settings/Update & Security/Backup.
It is not listed when I click Add a drive, although I can see and read it in This PC. I tried a restart but that has not worked. I do see a couple of USB sticks which are too small. Trying via Advanced settings is the same.
Prior to trying to add this drive I scrolled down and followed the instruction which said to delete the previous drive which was also an external HDD connected by sata. I used THAT drive via Macrium and it got carried over in the W10 update from W8.1.
What is the name of the folder where my Live Mail contacts are stored?I've lost them & I'm hoping to restore them from a Backup Image file...
View 1 RepliesI just bought a WD My Passport Ultra and it comes with a copy of WD Backup. Never using backup software I decided to give it a try and see what happens. I had no problems at all until I ended up with a message "These files failed to back up: UPPS.bin, 15.77kb". so I decided to try and find the file, which I found. The question is, what this file does and is it necessary to backup? Probably most of you know where this file is but for those who don't you can find the file at: C:UsersUser NameAppDataLocalMicrosoftWindowsUPPSUPPS.bin.
View 6 Repliesaddressing in order to not lose my data. To give a bit of background, my laptop has 2 internal hard drives, 1 is my main/primary drive which I used for day to day operation and the other was just a backup drive which has a system image of my system.
My main drive failed, and after many horrifying clicking, scratching and high pitch squeals coming from the drive, I can only assume it has failed mechanically and isn't some kind of virus. So now I'm currently left with only my internal backup drive with a system image on it.
I was hoping to use this backup drive as my new primary drive, however I want to keep the files on the backup drive. I checked with my Hirens Boot CD and saw that my backup drive contains everything my other hard drive had, including the operating system contained within the Windows backup folder.
Normally for this I would install windows on another hard drive and then restore my files with the system image. However my laptop doesn't have a system restore disc or a copy of windows, it instead came with partitions on the hard drive which requires erasing my backup and consequently losing all my data.
I finally ask the question, is it possible to use the files currently stored on the backup drive without having to resort to buying a new hard drive to copy the files across and then partitioning my backup drive?
My wife's Samsung laptop gets a failure whenever trying to do an image backup. Actually, this has been happening for quite a while - even before she installed Windows 10 when she had W7. I was hoping that the problem would go away with W10 but it hasn't. Backup runs almost to the end and then fails with the attached message. The message says to run dskchk on both her drive and on the backup drive which I did. No problems were found. (I backup my desktop on that drive all the time with no problems.) I tried backing it up on another external drive that also tests good but got the same error message.
View 9 RepliesWhenever I do the File History Backup; at completion it gives me the following message: "Backup encountered a problem while backing up file C:UsersAdminSkyDrivePictures. Error: (The system cannot find the path specified. (0x80070003))". I believe this occurred for the first time after I upgraded from Windows 7 to Windows 10. I no longer have a SkyDrive folder it was replaced with a OneDrive folder. For some reason it is still looking for the SkyDrive folder. In the "Exclude from File History" screen I am unable to exclude the SkyDrive folder. I guess that doesn't surprise me because I no longer have SkyDrive folder. How then do I prevent this error occurring when doing a File History backup?
View 4 RepliesI made a thread here some time ago in trying to create a System Image (Sys Img) using a 3.0USB 1 TB Toshiba External HDD. My issue is it runs then stops with errors and creates blank folders in the ExtHDD.
View 9 RepliesI Created an image backup using Windows 10. I burned the repair CD. I booted from cd. Options are most recent backup [but it only shows D:, the factory backup partition]. No browse capability. Other option does not let me browse to the folder the system created, "F:WindowsImageBackup". How do I restore from this image instead of the factory image?
View 8 RepliesLong story sort I kind of messed up my GPT partition table. I have backed up an image of my Boot partition only (C:) and not any other partitions such as bootloader etc...
So my question is, would I be able to start all over, re-format the drive from Win10 installation media and do a clean install, then paste my backup onto just the boot partition leaving everything else in tact? I know how to rebuild the bootsector in case I can't boot.
Edit: Wasn't sure if this should go here on into the Install section, mods feel free to move it if needed.
I've been using Backup & Restore on some Win 7 systems but now I have added a new Win 10 PC (from HP).
It's not entirely clear to me why I would use the Win 10 File History facility versus Win 7 Backup & Restore. File History looks like a partial backup. I'd prefer a full backup. Win 10 advertises creating a System Image but I don't consider that an alternative to a file backup with all the files (mine and the system's).
I have tried to run a system image backup on my Win10 VM and it fails with an odd message.
the location must not be "compressed or encrypted or sparse".
Now I understand what compressed and encrypted mean and the location is not those, but sparse?
Details
Host: Win7 64bit SP1
Guest: Win10 64 bit build 10565
Location: Netgear ReadyNAS
Now that my computers are updated to Windows 10 , are the old back up disk images with win7 of any use ? Can they even be used to revert back to Win 7 ? Should I just delete them and make new disk image with win 10.
View 6 RepliesI've noticed after upgrading Windows 7 to 10 that Backup and Restore (from 7) remains available in the Control Panel. The app appears to work, but I tried running a backup, including system image, on a friend's system and heard that it failed. I haven't looked at it yet, but wondered if perhaps this app doesn't work properly in Windows 10?
View 6 RepliesI just upgraded from Windows 7 home premium to windows 10. When the automatic backup that I had scheduled under windows 7 ran, I got an error. When I try to run backup manually, I get an error saying that I don't have enough space. My C drive is a 745 GB drive with only 128 used. My backup drive is one TB with 438 used and 656 free. I would think that would be enough space. It always worked under windows 7. What do I do?
View 3 RepliesI've backed up my registry twice recently, and I noticed a huge difference in the size of the backup file. Two days ago, the backup I created was 18,066 KB. The one I created this morning is 247,691 KB. Should I be concerned about this, and, if so, what can I do about it?
View 3 Replies