Performance :: Backup With System Image Failed Because User Files On 2nd Drive
Oct 9, 2015
I have been trying to setup a scheduled backup (Windows 7 Backup and restore) on Windows 10. I want to include a system image of the C: drive as part of the back up and save it to the D: drive. However Windows wont let me save the image on the D: drive, I think because I moved the location of my user files to the D: drive to save space on my SSD.
Any way to override or workaround this without having to move my files back to the C: drive?
View 3 Replies
Similar Messages:
Oct 30, 2015
I have tried to run a system image backup on my Win10 VM and it fails with an odd message.
the location must not be "compressed or encrypted or sparse".
Now I understand what compressed and encrypted mean and the location is not those, but sparse?
Details
Host: Win7 64bit SP1
Guest: Win10 64 bit build 10565
Location: Netgear ReadyNAS
View 9 Replies
Jan 22, 2016
Question; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files from it. and the folders are there but I do not want to screw things up, as I don't know what I am doing.
View 9 Replies
Oct 13, 2015
I want to create a system image of my primary drive (an SSD) on an external 230gb hard drive as backup for any incovenience.. The problem is my other drive (games,movies, photos, etc) is automatically checked as default because "required for Windows to run" among my primary drive and System Reserved 350MB partition. I cant uncheck its box.
My pc runs windows 10
It' s a custom built pc with:
i7 4770k
GeForce GTX 770 2GB
8gb RAM
230 gb of SSD (primary drive) with still 70gb of free space
1 Terabyte of Hard disk (secondary drive)
230 gb of external TrekStore drive (NFTS formatted)
View 9 Replies
Apr 1, 2016
I recently purchased a Lenovo 900 ultrabook, and proceeded to upgrade from Windows 10 Home to Windows 10 Pro (using a Windows 7 Ultimate product key). Now that I have done this the factory "restore" does not include my upgrade and I am concerned that I would lose it if I ever needed to restore.
So, I am trying to do a full system image backup to a flash drive, but Windows 10 says that the drive is not allowed for this. I can create the USB drive as a network share and get the backup to work using that method, but I don't really trust that it will work properly.
How to do a full system image backup to a USB drive in Windows 10 that you trust will work in the case a restore is needed?
View 3 Replies
Oct 23, 2015
I made a thread here some time ago in trying to create a System Image (Sys Img) using a 3.0USB 1 TB Toshiba External HDD. My issue is it runs then stops with errors and creates blank folders in the ExtHDD.
View 9 Replies
Aug 22, 2015
I have a problem with windows system image backup. My OEM windows 8.1 was installed on normal HDD with mbr partition config. so i bought an SDD make an image back up from my drive c. and then use windows DVD to recover(install) the image on new SDD.
Now after i upgrade to windows 10 i learned that i could change mbr to GPT and use EFi boot instead on using old legacy boot option. Now after doing all these without reinstalling windows(cause I cannot go back to win 8.1 anymore)
I decided to make a image back from windows 10 so i can restore to it in future. The problem is every time windows tries to make an image, when it start to make an image from EFI partition it ran into this error : (the specified backup disk cannot be found) 0x807800c5
View 5 Replies
Nov 5, 2015
When trying to create a system image I get the following error?
I have HDD attached but they are encypted with bitlocker. Prior to upgrade I had no issues.
View 3 Replies
Dec 2, 2015
After spending two days to get my computer reprogram after a Diskpart failure I want to do a backup on the drive. Is the Windows10 backup good to use,or do I need something else. If I do a complete backup can I restore it to another formatted drive ?.
View 9 Replies
Dec 1, 2015
So overall, I was having a issue with creating a system image. It would state that "The specified backup storage location has the shadow copy storage on another volume (0x80780038)"
After reading several forums I found that if you delete the restore points you are able to create a system image.
During my troubleshooting, I was attempting to backup to a 64GBthumb drive (this worked in win8 and win7)..
As I was trying to use the thumb drive, I ran into the following issue..
First it says it needs to be formatted to NTFS. Once I format it to NTFS, it says "The drive is not a valid backup location"
Images I found - [URL] ....
I do not want to use any 3rd party software to accomplish this.
View 8 Replies
Oct 18, 2015
One of the 1st things I do with a new PC is create & test a recovery drive. This is the 3rd Windows 10 PC I've worked on-all Toshiba Satellites by coincidence. This one seems to have a problem, possibly creating the recovery drive and if not that then certainly using it. Or else I've forgotten how I used it on the other two. I test it by doing a restore from system image-since I create it immediately after completing setup I haven't lost anything and this assures me that if nothing else I can get back to 'ground zero'.
This is the 3rd time I've tried this on the new PC. The first time it said it was unable to create the recovery drive. I checked the USB stick & tried again. That time is 'successfully' created the drive. Both times 'copy system image to recovery drive' was checked. When I tested the 'successfully' created drive it couldn't find a system image on it.
So I'm trying it again and it's just sitting on the 'Please Wait' screen-for 20 minutes so far. Presumably it's erasing the drive so I'm reluctant to simply reboot. And this is the last 16GB USB stick I have. Should I shut it down & try again, get another USB stick, or what? Or have I totally forgotten what I did on the previous 2 PC's that worked?
View 3 Replies
Oct 26, 2015
I had updated windows 7 home premium to windows 10 then when the update was complete I created a backup image of the whole system.... and saved in an external HD. then my fixed disk died, replaced by a new fixed HD I can not recover the backed up windows ten image from my external HD ... is that due that when replaced the new HD I am contrived to recover the system with windows 7 home premium and windows 7 do not recognize the backed image of windows 10?
View 1 Replies
Jun 29, 2015
I've not partitioned a hard drive on Windows 8/8.1. In fact, I've never partitioned a hard drive on Windows 7. The last time I partitioned a hard drive was Windows XP to dual-boot two operating systems. I'd like to partition the hard drive on my laptop in order to save a backup of my system onto it, as I don't have an external drive right now. Any detailed, step by step process to partition my hard drive and then back up my system onto it? I have 350GB of free space.
View 4 Replies
Aug 30, 2015
Before I upgrade to Windows 10 on my Windows 7 desktop I'd like to know whether or not there is a built in create a backup system image?
Once my Windows 10 upgrade is running properly and before adding in any new programs I wish to create a backup system image
--- I know I can use a 3rd party program and I am use to Macrium Reflect on my Windows 7 but I wish to know whether or not there is a built in create a backup system image utility
So far I have found which I will do while my Windows upgrade is in pristine condition
Recovery Drive - Create in Windows 10 [URL]
Windows 10 ISO Download [URL]
View 14 Replies
Feb 10, 2016
My wife's Samsung laptop gets a failure whenever trying to do an image backup. Actually, this has been happening for quite a while - even before she installed Windows 10 when she had W7. I was hoping that the problem would go away with W10 but it hasn't. Backup runs almost to the end and then fails with the attached message. The message says to run dskchk on both her drive and on the backup drive which I did. No problems were found. (I backup my desktop on that drive all the time with no problems.) I tried backing it up on another external drive that also tests good but got the same error message.
View 9 Replies
Oct 29, 2015
I Created an image backup using Windows 10. I burned the repair CD. I booted from cd. Options are most recent backup [but it only shows D:, the factory backup partition]. No browse capability. Other option does not let me browse to the folder the system created, "F:WindowsImageBackup". How do I restore from this image instead of the factory image?
View 8 Replies
Mar 2, 2016
Every time I try system image backup with my windows 10. It starts then stops with an error.
I had the same problem with windows 7, and someone gave me these instructions (click start run cmd hit enter run as administrator
fsutil usn deletejornal /n/d f:) run image again..
click start buton the search it "services" click microsoft shadow copy provider" right click properties then change disable to automatic, click apply.
View 1 Replies
Oct 26, 2015
Whether partitioning of pen drive is required to keep backup image on Macrium rescue pen drive?
View 6 Replies
Jan 25, 2016
We were all excited to get Win 10 and did a clean install, and finally after some time got everything worked OK. At least for my Lenovo Y40-80 it took some time. Now that I am adding software to focus on using most of this laptop. I wanted to make sure I create a system image that is this time in Win 10 to restore if something messes up in the near future.
However, this was a win 8.1 pc and never had win 10 restore in its restore partition that is the built-in Lenovo Restore & It has no CD/DVD Drive to create Natural Win 10 Repair Disc to boot from. So I am trying now to create a "Recovery Drive" on an external USB to keep however since I can't create a Win 10 Repair disc without CD/DVD Drive, how am I going to have access to this Win 10 backup if I have to restore to this point??
Finally I also don't have any clue that; even if I took the risk, and restored back to original Win 8.1 - is it going to be possible to pass again to Win 10 clean install.
Will it be possible without any Win 10 key? What key it passed on to when it did clean install to Win 10 this past september when I did my free upgrade...
How to manage to create a win 10 native backup and were able to restore it without having to go back win 8.1 partition.
View 1 Replies
Jan 2, 2016
Jan. 3rd 2016 I have a 931 GB external HDD using a brick power supply and connected by USB. I wish to do weekly backups to it via Start/Settings/Update & Security/Backup.
It is not listed when I click Add a drive, although I can see and read it in This PC. I tried a restart but that has not worked. I do see a couple of USB sticks which are too small. Trying via Advanced settings is the same.
Prior to trying to add this drive I scrolled down and followed the instruction which said to delete the previous drive which was also an external HDD connected by sata. I used THAT drive via Macrium and it got carried over in the W10 update from W8.1.
View 5 Replies
Nov 20, 2015
How can I check that my system image will work in the case of a crash, Windows 10.
View 3 Replies
Aug 20, 2015
I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to be used for booting at power up or reset. When I restarted the computer, a message appeared saying "Press any key to boot from CD or DVD". I pressed a key. After a few minutes, the following screen appeared:
I used the down-arrow key to select US and hit enter. Then the following screen appeared:
I used the down-arrow key to select "Choose Device" and hit enter. Then the following screen appeared:
This screen gave me only two options: (1) Boot with the BUFFALO optical drive, and (2) Boot with the Solid State Drive which the HP Spectre x360 has (instead of a real hard drive). When I used the down arrow to select the BUFFALO optical drive, the screen that asks for the desired keyboard layout reappeared. When I selected US and hit enter, the screen that asks for a booting option reappeared. When I selected "Choose Device" and hit enter, the screen that gave me the option to boot with either my BUFFALO optical drive or the Solid State Drive reappeared. I found I could keep going around in circles like this, without ever having an opportunity to restore the computer with a system image I had created earlier.
View 9 Replies
Nov 5, 2015
Windows 10 build 10586 x64. When I try to create a System Image I find that Windows 8.1 and Windows 10 are both selected. How Do I just create a system Image for Windows 10
View 1 Replies
Dec 19, 2015
I did a clean install of windows 10 and now i am trying to do a system image and save it to usb but windows keeps saying this is not a valid location, my usb is a sandisk 64 gb formatted to the correct format that windows asks me to do. I have tried to do create a image on two usb flash drives but i keep getting the same error from windows that this is not a valid location .
View 5 Replies
Nov 13, 2015
I am getting a low disk space message from my system backup drive. It's 1 TB and it is full. There are not any files that I can delete. They are all system files.
Two questions:
1. Why is it so large?
2. Can I install a new larger drive and have it move the system files there?
View 4 Replies
Dec 5, 2015
I just re-installed Windows 10. I'd prefer NOT to do that any more than necessary, which includes after a Windows upgrade causes a problem.
SO, I'm trying to set up Windows 10 to make a system image (periodically). It WORKS fine, but instead of just taking the system disk, it's ALSO backing up one of my other disks. I BELIEVE it's because the other disk has a page file on it.
I'm putting the main pagefile on the NON-SYSTEM disk because my system is on an SSD and it's recommended (from what I've read) to minimize keeping things on there that get beat on regularly... BUT, as I understand it, any disk that has a pagefile on it is going to be included in the system image. This is a problem 'cause the non-system disk it's backing up has a couple TERABYTES of images on it along with the pagefile.
SO, can I tell Windows 10 Image backup NOT to mess with the other disk?
OR, do I put a little partition on the other disk just to hold the pagefile?
OR, do I just say, "screw it" and put the whole pagefile on the system SSD?
OR, do I find a 3rd party tool to make a system image?
View 4 Replies
