Performance :: Blinking Loading Circle And Touchpad Not Scrolling Properly
Jan 23, 2016
I recently upgraded my computer from Windows 8.1 to Windows 10 and have noticed some issues:
Whenever I stop moving the mouse, the little blue loading circle keeps blinking. Now I don't exactly if it's causing any problems but I'm sure it wasn't doing that before I upgraded and I think it may be related to this second issue:
My touchpad no longer scrolls with two fingers. Now it only scrolls via touching the right side of the pad and dragging my finger up or down. No two finger gestures work anymore.
There seems to be a new driver called Elantech and I've found a settings menu for it but the gesture controls say they're turned on even though they don't work.
I have an MSI GT 60
i7 Windows 10
View 1 Replies
Similar Messages:
Aug 1, 2015
I have this constant loading going on somewhere in my computer. it interferes with my games or if I put anything to full screen it automatically pulls it out of full screen and minimizes it. It also interferes with my typing. If I'm trying to type in an address to go to a website the flashing loading will make it so I have to keep clicking in the address bar to finish typing out the address. auto saved usernames are also an issue. where I'll type the first three letters of my username. It will pull up then immediately disappear. I have to be really fast to click it or result to the constant clicking of the username bar to put my username in.
Also an issue with right clicking anything. the right click "open, delete, new folder, etc" will come up and before I can move to click what I want it disappears. I restarted my computer and it went away once. I thought the issue was resolved and paid no attention to it. I then turned my computer off and back on after a virus scan and the problem persists again. I tried turning the computer off and on again but again the problem continues. how I can find whats constantly loading/causing the flashing loading icon next to my mouse?
View 9 Replies
Aug 15, 2015
Since loading windows 10 then mouse pointer working circle blinks with the can light blinks. Everything seems to work fine it just really bugs me. I went to setting and mouse then to pointer and it it set on the pointer only or top/first on list. this is a 1 month old Asus X550Z that came loaded with 8.1
View 1 Replies
Sep 10, 2015
I am using a dell inspiron n5010. the original synaptics driver keeps crashing every few days. I tried replacing it with microsoft drivers but 2 finger scrolling doesn't work with this. I need 2 finger scrolling since i dont have a separate mouse. Is there a solution?
View 5 Replies
Aug 14, 2015
since upgrading to Win 10 the Synaptics PS/2 touchpad will not scroll. I have rolled back the driver - didnt work, reinstalled the latest driver (15/7/15) -didnt work, all the relevant check boxes in device setting are enabled. (HP Pavilion dv7 Notebook PC)
View 4 Replies
Mar 19, 2016
Ever since I upgraded my Dell Inspiron 15-3521 laptop to Windows 10 from Windows 8.1 last year I've had intermittent issues with the touchpad. Specifically, about 25% of the times that I turn on the computer I'm completely unable to scroll up or down using two finger multi-touch gestures (putting two fingers on the touchpad and moving them up or down to make a webpage scroll up or down, for example). The mouse cursor will also randomly stop responding for a few seconds at a time when the scrolling issue is occuring. Usually I just restart the computer to get around it but I'd like to fix the problem once and for all.
I've tried fixing the issue a number of times over the past few months by upgrading the drivers from Dell's website as well as attempting other fixes suggested on other forum posts describing the same issues but haven't had any luck. I'm ready to try anything you suggest, including things I may have done already (ex: downloading the latest drivers), preferably saving more drastic measures for last. In addition, I should mention that after upgrading to Windows 10 I also began having intermittent issues with sound quality (bass is very low) when using headphones.
View 2 Replies
Jul 30, 2015
Scrolling using the touchpad is not working on either of my acer notebooks after updgrading to 10.
View 3 Replies
Jul 29, 2015
I just updated my win7 to win10, despite several negligible issues, so far I'm rather content about it. I browsed several options, lurked around settings, internet, friends- no straight forward method found. So, how to set the touchpad back, to behave as it used to in win7? My laptop does not have touchscreen, therefore i have no need to use this built-in 'feature', which is no good for me at all.
View 5 Replies
Aug 31, 2015
I upgraded my Gateway NV570P laptop. As soon as the upgrade finished, the scrolling on my touch pad no longer worked. I checked the settings, and it is still set properly for the scrolling to work. I tried upgrading the drivers, but Gateway only has touchpad driver updates for Windows 8 not Windows 10 - I tried installing those updates anyway, but it didn't fix the problem.
View 2 Replies
Jul 29, 2015
I've installed Windows 10 on two different HP Pavilion laptops (dv5, g6), and the problem is that the scrolling function turns off automatically (will be unchecked) after every reboot. Tried with different versions of Synaptic driver, the newest and an older one, it's all the same.
View 2 Replies
Nov 5, 2015
I installed Windows 10 on my HP 15044NR laptop (2013) model that came originally with Windows 8.1. I get the image at the bottom of the screen whenever it has to be restarted. I have a 32 bit PC. I can only use it if I reinstall Windows 10.
View 14 Replies
Sep 7, 2015
My laptop touchpad scrolling stopped working this morning after I updated my gpu driver. I went to the packard bell website and looked at the touchpad drivers for my laptop. There is a synaptics one and a elan one.
I have them both installed on my laptop but it still isn't working and there is still no virtual scrolling option in synaptics. These are the options that I have in the synaptics settings:
This is what it should look like:
What do I have to do to get the scroll trackpad feature to work again? P.S, when in device manager, even though there is an ELAN tab in mouse properties, Only the synaptics driver shows up under the mice section in device manager. Does this mean that the synaptics driver is replacing the ELAN and I need them both for the scroll to work.
View 1 Replies
Apr 14, 2016
I just got a second hand laptop - Acer V3-771G with an Elan touchpad and I put a new SSHD hard drive in it and installed Windows 10 fresh.
I see lots of issues with ELAN touchpads but it seems as though Microsoft has produce one that installs and fixes most scrolling issues.
However, I have a strange one. When I enable vertical scrolling in the driver, it works as long as the mouse is active - and for up to 5 seconds after. But when I stop using the touchpad and go to scroll again after 5 seconds, it doesn't work anymore! It's like it disables it after inactivity - but only 5 seconds?
I've uninstalled and reinstalled drivers, tried various versions - but of course Acer doesn't support Windows 10 on this older model laptop (circa 2012) so there are no specific drivers for it on their site. Everything works except for this scrolling after 5 seconds - which I can recreate every single time.
View 2 Replies
Jul 31, 2015
I upgraded to windows 10 from windows 7 and then I realized that all my files stayed which I didn't want all my files so I did a factory reset on my windows 10 upgraded PC and it has been stuck at 61% for about 8-9 hours. The circle loading is still moving but the percentage is stuck at 61. I am worried to turn off my PC in case of it being ruined.
View 1 Replies
Nov 15, 2015
Yesterday, after getting infected with malware, I decided to freshly reinstall windows 10 on my computer. However, after reinstalling it, I noticed that my bootup was very slow. During the windows logo part of the bootup, the screen flashes once, and the loading circle of dots becomes slow and low quality. Afterwards, the screen turns black for ~40 seconds, and then I get to the login screen.. And sometimes, I get that issue after logging in.
What didn't load in my bootlog:
BOOTLOG_LOADED SystemRootSystem32driversdxgkrnl.sys
BOOTLOG_NOT_LOADED SystemRootSystem32driversdxgkrnl.sys
BOOTLOG_NOT_LOADED SystemRootSystem32driversdxgkrnl.sys
BOOTLOG_NOT_LOADED SystemRootSystem32driversdxgkrnl.sys
BOOTLOG_NOT_LOADED SystemRootSystem32driversdxgkrnl.sys
BOOTLOG_LOADED SystemRootsystem32driversWdFilter.sys
BOOTLOG_NOT_LOADED SystemRootsystem32driversWdFilter.sys
View 1 Replies
Sep 19, 2015
I just want to create my own Win10 here, but when I setup the VMs, and running it, It wasn't go well, It froze!
I have tried add the size to 21GB, using UEFI, and deleting the EFI folder, but still not working
View 3 Replies
Aug 2, 2015
Downloaded and installed 10 successfully, but when I try to open Chrome, I get a blank page with the spinning circle that says "loading". Tried to contact Microsoft customer support and was on hold for more than an hour.
The only reason I am able to post here is that I un-installed it and I'm back to Windows 7.
I primarily use the computer for internet access, word processing and e-mail.
View 9 Replies
Mar 5, 2016
OK so now if my touchpad is switched on the mouse cursor sometimes makes continuous erratic movements around the screen. Turning it off solves this problem. Is this a sign it's wearing out,
View 2 Replies
Aug 2, 2015
Since I updated to Windows 10 websites are not loading properly, but not all the time, sometimes they load as fast and normal than ever and some others they don't load at all and I need to hit refresh like 10 times for them to show up. It doesn't matter what website it is, the problem is with every one of them and also its persistent with every web browser (Edge, FF, Chrome). I have a laptop in my home too and it loads websites as it should be so it's not an internet or modem problem.
View 7 Replies
Jan 21, 2016
For the last 3 weeks anytime I "restart" my hp 32 bit pc it takes 6 minutes and all the while the screen is black with a small blinking light in the upper left corner everything is fine after it finally restarts and if I shut it down and start it back it starts normally and in the morning when I first start it up it starts normally it just happens any time I restart it for any reason.
View 7 Replies
Feb 10, 2016
Ever since I installed 10, I have major issues with scrolling through selection menus and drop down menus pop up when clicked on but immediately disappear. Also on start up, the page that is supposed to roll up to access your login screen won't roll up on it's own...I have to hit f11 to get it to go up.. It is not only in web-based windows on the scroll problem either...it happens in the start menu as well and sometimes there is no response when something is clicked on.
View 2 Replies
Jan 5, 2016
Is it just me, or is System Restore in Win10 wonky? I have it turned on for both my C and D partitions. The other day I needed to go back to a restore point from 3 days before. The operation completed without issue, but then I found I wasn't able to reverse it.
In Win7 before restoring it would automatically create an "unrestore" point so the user would be able to undo the restore operation if they needed to. This isn't happening in Win10. Nor does the system automatically create a restore point before installing or uninstalling a program like Win7 did.
The "Restore Previous Versions" feature is also affected. When I right-click a file and choose "Restore previous versions", the Properties tab comes up instead of the Previous Versions tab. Clicking on the tab it always says there are no previous versions available, even though there should be since there are several restore points. The other day an important file got corrupted and I thought I could restore an earlier version like I always could under Win7 but the tab was empty.
View 8 Replies
Feb 23, 2016
Normally when i use the net all is fine. Noticed today when i run a video convertor programme in the background the loading of web pages is extremely slow. Stop Freemake video convertor and page loading is normal speed. I assumed it was memory, did memtest and no errors found. CPU monitor sits on 100%. Had similar problem with Villisoft last week. Time for a new CPU methinks but having said that would 100% cpu usage slow down webpage loading to that degree.
View 5 Replies
Aug 12, 2015
Ok so since upgrading from 7 to 10 file explorer has been a absolute nightmare! Everything was either incredibly slow, didn't happen or only partially load. After enduring this to this day I have decided enough is enough and started diagnosing by limiting the startup services using MSconfig.
After going through enabling startup services groups at the time and restarting the computer everytime! Eventually I found the service that was causing the problems with file explorer. The service is called Windows search and once disabled it restored functionality to file explorer. The search function in file explorer works but the search in the taskbar doesn't.
Step by step guide:
1. Hold Win+r to open run
2. Type msconfig and hit ok or enter
3. Click Services
4. Navigate to Windows search (you can sort the list in descending alphabetical order)
5. Uncheck tickbox
6. Click apply then ok
7. Select to restart now
View 4 Replies
Nov 9, 2015
Since 2 or 3 weeks when I switch on my notebook, after loading my desktop it hangs loading startup programs.When it hangs, I can't even shut down, I have to press the power button 4 seconds to shut down.It happened with my 3 notebooks, but it remains only in one of them.This problem remains in an HP EliteBook 8540w running Windows 10 Pro 64 bits. In this notebook I had uncheck the "Turn on fast startup (recommended)" when I installed Windows 10, because it didn't shut down properly.I don't know what to do, I tried SFC and DISM tool, both found errors but were unable to correct them.
View 5 Replies
Aug 25, 2015
I decided to make the jump to Windows 10 from Windows 8.1, and I have to say, the design looks simpler to use, but this new OS software has done something with my touchpad. Originally, on my Windows 8.1, I was able to scroll through whatever web pages or folders in my computer with one finger using my touchpad. With this new update, initially, I thought it broke my touchpad completely, but the problem has been narrowed down to having to now use two fingers to scroll in the most awkward way as this touchpad doesn't seemed to be designed for two finger scrolling. Is there a way for me to change this back? Would I have to revert back to Windows 8.1 to get my one finger scrolling back?
The laptop I am using is a Gateway NE56R34u, and the touchpad is an ELAN.
View 1 Replies
