I have a new configuration (z170 chipset, i3-6320, fast SSD) for my desktop and it boots slower than my laptop (Acer V3-574G (i7-5500) with the same SSD as my desktop). I don't think the i3-6320 vs i7-5500 can explain such difference.First thing is that Hibernation and Fastboot are activated but not working on my dektop PC: command "Get-WinEvent -ProviderName Microsoft-Windows-Kernel-boot -MaxEvents 10 | Where-Object {$_.id -like 27}" gives me 0x0 (cold boot from full shutdown). Parameters ares ok in settings and in registry (hiberboot = 1).I tried using Fast boot and MSI fast boot in the bios: no effect. I tried to enable win10 whql in bios but it is disabled after rebooting, with a warning message saying that my graphic card does not have GOP.So, I'm not able to fast boot due to an "old" hd7750 graphic card ?
As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
Control PanelAll Control Panel ItemsPower OptionsSystem Settings
Unchecking the "Turn on Fast Startup" command in the above setting path does not do it. There is supposed to be a motherboard software for enabling a normal startup the next time the computer is restarted.
I'v got a problem. I had 1TB HDD and fast startup was working for me, but when I move my system to a 120GB SSD, I cannot enable it. I'v got Win 10 PRO x64 and laptop MSI GE72-2qf
So I just upgraded my wife's computer and noticed it loads directly to my account which has no password. When I restart it never asks who's account I want to logon to, just goes to mine. Of the three computer I've upgraded this is the first to do this. Also in the power options I can't find the option for fast boot.
Laptop is Lenovo X220 that had Windows 7 Pro and upgraded to W10. It has had already 5 vanilla installs of 10 Pro 1511 on it.
2x install with an old 3.5" 5400 RPM stock HDD drive and the 4-5th and final install with an upgrade to an SSD. The HDD was changed to SSD because of me thinking the HDD was dead and was causing the computer to lock up at boot.
Tried 3 different operating systems on the machine as well, Windows 7 (no problems) (stock with computer), Windows 8.1 (with Fast Boot) enabled and no problems on Windows 8.1 O/S and finally W10 PRO 1511, vanilla from Microsoft directly.
For some reason after W10 installs, does its updates, reboots, drivers are updated and everything seems fine after a couple of reboots and such. Works normally, wakes up from sleep. Only 3 programs get added. Firefox, Chrome and WinRar.
After that shutdowns OK, but when she boots up it gets past the welcome screen and hangs on the desktop. Complete hang everything becomes unresponsive, but the mouse pointer. I can dance the pointer around but No keyboard input no GUI input, nothing. Only way to come out is with a POWER BUTTON DOWN. Was trying to solve this issue since December and never found any solution, thought it was drivers or internet, or hardware but nothing, no dice. Even if it didn't connect to the internet after install and a program or 2 were added via USB and I shut down it would hang upon next boot.
So I did reading and reading and researching and I came upon a thread that mentioned W10 hangs on welcome screen with Fast Boot on, I thought no this can't be it because I make it past the welcome screen. I hang on the desktop when I'm actually in Windows. I can manage to click Start button and the system will hang. Only way to get it to respond is to hold down the power and power it down. Temps seem OK, MEMTEST came back fine, replaced HDD with SSD, only other thing I could think out was drivers or hardware (mobo) failure or something else ....
Then I decided to clean install update drivers via Internet, reboot and then disable FAST BOOT via @Brink regedit hack, because for some weird reason, on this machine on every clean install, FAST BOOT IS NEVER SHOWED in the POWER menu. I could not understand this. I do not have this option at all like @Brink has in his diagram photo. The option is just not there!!! But the registry though the hiberbootenabled value is set to "1".
So two questions, why is it checked and greyed out (that I cannot uncheck it) and 2, the only way I was able to change the value was manually via @Brink registry edit.
OPTION 2 - using a bat file because option 1 was unavailable. Fast Startup - Turn On or Off in Windows 10 - Windows 10 Forums
Once I disabled FAST BOOT, the laptop has been fine since. No locking up anymore period!
SSD is 850EVO and W10 PRO is the only O/S on the machine, legit with digital entitlement upgraded from W7 PRO key on the Lenovo, because its an X220 thinkpad so 'business' series. No problems since.
#1 Fast Boot option to disable on startup is not avialable on the machine? Value is "1" in registry but cannot make changes to it via control panel as it simply is just not there. (This was the case with both HDD and new SSD). Windows 8.1 shows the option, not 10.
#2 Hangs on startup after welcome screen
#3 Only way to prevent is to run the .bat file from @Brink or manually edit value in regedit, save, exit, shutdown, go on with life.
AFAIK value in REGISTRY is set at '0' and machine works ....
Brink has this option on his machine via control panel but I do not on the laptop. Brinks:
My PC does not give me that option at all. Is if it doesn't even exist.
I've been in the Windows Insider program since it started, getting every new build, and I usually hibernate my PC to keep all my apps open, only rebooting for updates that need it.
This has been fine on Windows 8, 8.1 and 10, up until the November update. I downloaded the initial, "faulty" November ISO with the media creation tool, but didn't get round to installing it until after it'd been pulled and reinstated. So I used NTLite to integrate that update in to the ISO I already had and did a clean install of that.
Everything was great until the next morning when I turned it on again. It booted as normal until it got to the Windows boot screen, which flashed on screen for 1 second or so before the PC just instantly powered down, like someone had pulled the plug out.
I troubleshooted this for ages and eventually worked out it's hibernation and fast boot - the only way to make the PC boot properly again is to go in to the BIOS and change the amount of memory given to the integrated GPU so you're effectively changing the hardware of the machine, which makes Windows dump the hibernate images and boot from scratch.
I've been reading that having fast startup on in windows 8/10 can cause issues with dual booting systems with other operating systems installed like windows 7. I have windows 7 on one ssd and going to have windows 10 on a second. Will i have to disable fast startup in windows 10 or any other type of hibernation settings.
Installed MSI's "Fast boot" software, upon restarting every time I am greeted with a bluescreen mentioning it not detecting a device.
MSI Fast boot also seems to increase the time it takes for the mouse and keyboard to start so when it asks "Press enter to Retry, or F8 to change settings" i cannot do anything as the keyboard and mouse are not on.
This is on a fresh Windows 10 install, using a 60 GB SSD and a pair of 1 TB HDD's. No folders were moved off the SSD (C:) outside of what Windows supports. (That is, I moved all user folders to the HDD that I was allowed to, and installed all programs to the HDD that I was able to.)I enabled hibernation via the Power Options > System Settings section in the control panel. The C: drive has 25 GB free space; well more than enough for hiberfil.sys to work normally. When hibernating, the system appears to behave normally and hibernate as it should.
When booting from a hibernated system, the computer POSTs normally and then brings up the Windows 10 logo and loading screen briefly before powering off very suddenly. I have to turn on the system again, and when I do, it boots normally but the hibernation state is lost.I've attempted disabling fast startup, which seems to have no effect. I've updated my video drivers to 15.9 beta, but I recall this being a problem on 15.7 as well. Full system specs are in my profile. This machine was running Windows 7 in the past before upgrading, but I had to run a fresh install of Windows 10 after encountering some problems. (So the system is currently on a fresh install.) Google is also currently unable to deliver any relevant results for this problem. Windows Update reports being up to date.
Edit: Additionally, this has never been a problem on Windows 7. The SSD is in decent condition too, and has not exhibited any problems.
Edit: This problem was happening on shutdown and restart as well. I disabled fast startup, which corrected the problem when shutting down. Here's a summary of the behavior now:
Shutdown, no fast startup: Able to start up normally without any unexpected behavior.
Shutdown, fast startup enabled: Computer immediately shuts off just after reaching the Windows boot screen. Has to be powered on again and then will boot normally.
Hibernate, regardless of fast startup setting: Same behavior as above.
Conclusion: From my understanding, fast startup acts as a subset of hibernate. Windows 10 is not able to properly hibernate the driver(s) and/or some other system state. I might have to go through the drivers via process of elimination to see what's causing the problem.
Edit: I found the problem!
So despite no BSOD ever appearing, I ran the BlueScreenView utility to view the system dumps. Got the driver IRL not less than or equal error, found that it was from sptd2.sys; the SPTD (a SCSI bypass driver) I installed with Daemon Tools. I found a separate uninstaller for the driver and got rid of it; it's not something I need anyway. (Lots of Google searching will find you these utilities and solutions.)Would be nice if it showed an error or BSOD in the first place! I was about to go whack-a-mole on the drivers, but I would've never found the root cause.
Upgraded from win 7 Pro x64 to Win 10 Pro 10 days ago,, first week startup was perfect, then something happened, an upgrade or external program, don't know.
Have read in other forums to run DSIM.exe and found some errors, but didn't know what to do..
I have decided to get ready to remove my pesky 4.88GB Windows 8.1 Partition (partition 5) from my PC because now I have Windows 10 and no longer have the option to go back. I have used a Command in the Elevated Command Prompt to enable the F8 boot menu as a substitute to the manufacturers boot menu (Press Esc.) I know the boot menu by the manufacturer will be removed with the (partition 5) too. I have also found that the WinRE is on a different partition (partition 4), and so my question is... If I delete the manufacturers partition (p 5), will the F8 menu also be gone as well? It seems the F8 menu was put there by windows and not the manufacturer, but is it on partition 5 or is it on the same one as the WinRE partition (p 4)?
I've been trying to fix this for a while, but I have had no luck. My sister for her birthday got a new laptop (Dell Latitude E6420 Intel i5 2540m at 2.6 ghz). I did the free Windows 10 upgrade for her, and when the computer is starting from a shut down, it goes to a black screen with the mouse, and the mouse is frozen. There is nothing I can do but hold down the power button to shut it down.
Basically, I am following the instructions to the letter, and it all looks ok, but when my system restarts, I go back straight back into system configuration and click on the services tab and the 'hide all Microsoft services' box has unchecked itself, also scrolling down the list only a small number of services remain unticked, and both 'enable all' and disable all' functions are available, as per screenshot;
Obviously this isn't how it should be because there are steps in Microsofts 'How to reset the computer to start normally after clean boot troubleshooting' procedure which include, 'clear the check box beside Hide all Microsoft services'. But it's already clear when it should be in clean boot mode. And most of the services are running.
The part of the procedure where I go into startup and disable all the items seems to work ok, they are all still disabled when I reboot.
I wondered if it was something to do with my HP Support Assistant, so I disabled that and tried the procedure again, to no avail.
I have a PC running Windows 10, but it is taking an unusually long time to boot. It can take more than 5 minutes, even though the boot drive is a 250GB Crucial MX200 with the latest firmware. I know that this is a very vague issue, but if i should provide more info for you, let me know.
I know there are several threads by this name, but my problem, as far as I know, is quite peculiar and I haven't seen anything similar to this in any thread. Yesterday I did a clean install (actually I wiped the whole hard drive and converted it to MBR since it was in GPT and Windows wasn't letting me install it on GPT filesystem) of Windows 10, and installed all the necessary drivers and the basic essentials. I don't know exactly when but after I was done doing some housekeeping, my Windows started taking too long to boot. What happens is that it shows the Windows loading screen (like in the image attached), does the boot animation for about 5-10 seconds, then blinks the screen momentarily, and then shows the Boot animation screen again. But this time, the loading circle animation is really choppy and the pixels seem to be slightly blown out. Then it takes a good 1-2 mins at that screen and then shows the blue screen with loading animation, shows it for another 15-20 seconds and then shows the Login screen.
I've upgraded my laptop from W8.1Pro to W10Pro. At first everything was fine, but now the boot is very slow with the icons taking ages to appear on the desktop and the taskbar. I've removed almost all the automatic start up items, defragged and reinstalled the graphics driver.
After installing windows 10, most of the time when I boot after the windows logo with circles below it the signal to display stops, if I press reset then the computer boots but the startup is very slow. With windows 8 from pressing the power button I would get to desktop in 8 secs, here it takes at least 30 secs or more. I would like to know the if problem is with windows 10 or Nvidia drivers.
Turn the power on and the computer boots very quickly to a very dark black screen. I can just make out the desktop but not clearly enough to do anything. Power off then on again and it boots correctly but very slowly.
I have Windows 10 installed on my SSD primary drive. I also have a 4 TB RAID 10 array that I want to remove to reutilise the disks in my new NAS. However...
If I remove the drives, windows won't boot. I've seen various errors, but basically it loads to logo, spins round and round and then halts, usually with "inaccessible boot device".
I've been having this problem for a long time, I've tried resetting my pc to factory settings, didn't work. I tried windows trouble-shooter, didn't work. When I boot I am greeted with a zoostorm logo for about 50 seconds followed by a black screen for 1 minute, and then a windows screen for about 30 seconds. Booting takes about 2-3 mins and even when I'm finally in, my programs load extremely slow and I can only open chrome after a minute otherwise it lags. Remember I have reset my pc so nothing runs on startup apart from steam.
I have a gtx 970 and the latest drivers for it. Also I get 100% disk usage when performing certain tasks. my cpu,gpu and memory never go to such percentage and if they do its because I'm running a very cpu,gpu or ram intensive game. I have not changed anything in my bios since I got my pc and have never done anything to the disk drive (all I know is my HDD is 3tb and has a speed of around 120mb/s) The only thing I have changed on my pc since I got it was an upgrade to windows 10 from 8.1, gtx 970 from a 750ti and a 750w power supply by corsair.
I do not know if this problem happened when I had windows 8.1 but even if windows 10 is the problem there must be a way to fix it as I despise using windows 8.1 anymore. Another thing to note is that loading times for games take a little longer than my friends and my pc is slow at downloading games, my disk usage when installing games is usually 13mb/s and I get 100% disk usage from using 13mb/s. As you can see by this screen shot steam is downloading fallout 4 and 14mb/s of my disk are being used and everything else barely reaches 1mb/s
I've been having problems with Internet speed variations recently. Today I had a Tech from my ISP here to look at the problem and he discovered that immediately after boot I have over 50 active sessions open on my PC, even before I open a browser window. This machine has Norton Security installed and active and I've recently run Norton Eraser As Well as Malwarebytes and neither of them have found anything significant while scanning.
