Performance :: C Drive Automatically Getting Filled Up
Oct 19, 2015
I had upgraded to win 10 about two months ago. for the last two days my c drive is getting filled up automatically. It is in excess of 90 gb and yet yesterday It was full. I tried to check on dosv files etc but to no avail. I then decompressed all files using the option under properties on right clicking the c drive and got 25 gb free this morning. I am watching uselessly as it has already reduced to 19 gb and is reducing fast with no activity and no internet down load etc from my side.
View 4 Replies
Similar Messages:
Oct 19, 2015
I had upgraded to win 10 about two months ago. for the last two days my c drive is getting filled up automatically. It is in excess of 90 gb and yet yesterday It was full. I tried to use online support and checked on dosv files etc but to no avail. I then decompressed all files using the option under properties on right clicking the c drive and got 25 gb free this morning. I am watching uselessly as it has already reduced to 19 gb and is reducing fast with no activity and no internet down load etc from my side.
View 1 Replies
Sep 3, 2015
i am using windows 10 since last two weeks..since installation i am facing this issue .. my pc goes into sleep mode without any reason..suppose i am working on anything ..like i am watching you tube videos or anything..suddenly my screen changes to black and my pc then goes into sleep mode..then i press the power button ..and it again resume the windows...i tried everything .like updated the drivers and other settings..but no results .
View 4 Replies
Oct 24, 2015
After I upgraded to Windows 10, my system won't go to sleep automatically. The display will turn off after the idle time I've set but the computer remains on. I've tested with setting it to sleep after being idle for 1 minute, and only the display turns off. If I manually go to Power -> Sleep in the Start Menu, it will go to sleep.
View 9 Replies
Oct 19, 2015
I had upgraded to win 10 about two months ago. for the last two days my c drive is getting filled up automatically. It is in excess of 90 gb and yet yesterday It was full. I tried to check on dosv files etc but to no avail. I then decompressed all files using the option under properties on right clicking the c drive and got 25 gb free this morning. I am watching uselessly as it has already reduced to 19 gb and is reducing fast with no activity and no internet down load etc from my side.
View 2 Replies
Nov 6, 2015
So far I only received a restore point for when I installed a LAN driver and when I make them manually. Why can't it create more like it used to?
View 4 Replies
Nov 1, 2015
Having some internet issues where connection is lost for 3-4 minutes and the cable modem restarts. The event viewer is filled with the logs below usually before the internet disconnects. I'm wondering if this is the cable modem's fault and Windows just reporting what's happening, or if the computer itself is causing the cable modem to restart.
Code:
Fault bucket , type 0Event Name: WPNConnectionFailureResponse: Not available
Cab Id: 0Problem signature:P1: Data Fast-Reconnect
P2: 8004acb1P3: WNPP4: UnknownP5: UnknownP6: UnknownP7: 1P8: 242P9: P10:
[Code] ....
View 1 Replies
Feb 23, 2016
How do I automatically mirror files from a hard disk drive to a network folder?
In this case I want to mirror the contents of an entire disk containing photos (no system files) to a shared folder on an OpenMediaVault server running on my home network.
This is separate from the regular backup of the rest of my system which is done with backup software. For the contents of this disk, I don't want them compressed into a backup container file. I want them to be exact duplicates of the original files, kept up to date in that shared network location (login required).
Also, it doesn't matter if they update in real time. Once a day is fine, for example.
View 8 Replies
Jan 8, 2016
I have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Shadow Copy Storage association
For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
[code]....
View 4 Replies
Jul 29, 2015
I am running Windows 10 Home 64-bit. I have an Intel HD Graphics card and a NVIDIA GeForce GT 735M. I have had an issue for a couple of months when viewing videos or footage from my built-in camera. Half of the screen appears fine, but the other half is filled with horizontal blurring bars. This happens with a lot of videos, but some appear okay. The attached image is an example from today on YouTube.
View 4 Replies
Oct 27, 2015
I have tried several times to create a system recovery drive on a USB.
Followed the instructions to the letter, and used two different brand, brand new USB's.
After initial start up it says I need a USB with at least 8 GB capacity, which these USB's have. But nothing happens, it just keeps asking for a USB after one has been inserted.
View 4 Replies
Jan 2, 2016
Jan. 3rd 2016 I have a 931 GB external HDD using a brick power supply and connected by USB. I wish to do weekly backups to it via Start/Settings/Update & Security/Backup.
It is not listed when I click Add a drive, although I can see and read it in This PC. I tried a restart but that has not worked. I do see a couple of USB sticks which are too small. Trying via Advanced settings is the same.
Prior to trying to add this drive I scrolled down and followed the instruction which said to delete the previous drive which was also an external HDD connected by sata. I used THAT drive via Macrium and it got carried over in the W10 update from W8.1.
View 5 Replies
Jan 16, 2016
My ssd c drive is saying I have 51GB of apps & games on my drive & I don't ... How do I fix it ???
View 9 Replies
Dec 23, 2015
I have recently updated to Version 1511 and thought I would try to create a recovery drive on a USB having been unsuccessful when trying in the earlier Windows 10. This time it seemed to be working with the system files box checked, though it seemed to take an age before the USB was required to be inserted. It said I would require a USB of 8GB minimum capacity so I used a 16GB size.
When it finished creating the drive ( I did not see the actual finish but no messages were left on screen) I noticed that the USB had only a little over 1 GB of information loaded.
I would probably find it useful if I could be told what files I should expect to find on the USB and the size of each. The files in my USB are titled: boot; efi; sources; bootmgr; bootmgr.efi and reagent. The sources file ( 1GB) is by far the largest.
View 9 Replies
Nov 19, 2015
I'm running Win 10 Version 1211 (build 10586.11) - i.e. the latest build with the latest update.
I want to create a new recovery drive but when I get to the window that says "Connect a USB Flash Drive" and the process comes to a dead stop.
-I'm using the same 16GB thumb drive that was previously used to create a Win 8.1 recovery drive so it should be good
-The thumb drive appears in File Explorer and I can read and write to the drive so the system sees it
I should also mention...
-I have attempted this with and without "include system files" checked.
-I find it interesting that after a thumb drive is inserted, I don't have the icon in my system tray that I would normally select to eject the thumb drive.
Nonetheless, I can read and write to the thumb drive. I've inserted the same thumb drives in another computer with Win 10 build 10240 and I get the USB eject icon on my system tray
View 9 Replies
Nov 25, 2015
My C Drive Keeps losing Space and yesterday i had 14gb then it went to 799mb and it keeps going down every 5 mins URL>...
View 9 Replies
Oct 13, 2015
I have upgraded a Win 7 and a Win 8 computers to Win 10. On the Win 7 I used an 8 GB USB Drive for Recovery and it did not use all of the space. On the Win 8 computer I'm getting a message that I need a 32 GB drive. I understand that it may also be backing up my Win 8 information, but 32 GB seems way too much. I hate to waste money on a drive that is not needed.
View 6 Replies
Oct 17, 2015
I'm having trouble setting the windows 10 file history drive. The drive I'm trying to use is Y: on disk 4 in the disk management image attached, which shares a 4TB hdd with another two partitions. It uses GPT and is a dynamic disk. All partitions are formatted as NTFS. When I go to file history and attempt to set the drive, only another partition on a different hdd is selectable which I would prefer to not use.
I was able to use this drive for file history up until I reinstalled windows 10 recently, where I formatted down to windows 7 from windows 10 tech preview, then upgraded to windows 10 to activate my old win 7 key. This was done after a recent major hardware upgrade (motherboard/cpu/ram). The 4TB hdd wouldn't have been touched by any of the windows installation procedures and I haven't set any page or hybernation files to it. The only difference is that it's plugged into a different motherboard. The old motherboard was a Gigabyte GA-980FXA UD5 (rev 2101) and the new one is a Gigabyte Z170X-Gaming GT G1 (rev 1).
I've had a look around on the web, and solutions have asked to remove any folders on the partition from libraries, which I have done as far as I can tell, with no success (there weren't any in the first place, but there were some on the other partitions which I've removed). Another solution was to share the partition with full read/write access to everybody. This did work, but it seems like terrible work around rather than a fix.
I'm guessing this might have something to do with the GBT/dynamic nature of the disk, but if that was the case then it shouldn't have worked before the reinstalls as it should still be the same.
View 9 Replies
Nov 26, 2015
I have a HP Stream 11 laptop I bought from Walmart, it came with Windows 8.1 and I went through the charade of upgrading from 8.1 to 10 so it would validate they key and then I immediately did a clean install. Sadly with this laptop, it only has a 32 GB eMMC drive (non-upgrageable), when formatted it is brought down to 28 GB, after the clean install I was at 15 GB, I have installed very very few and rather lightweight applications that at most take up 1 GB. So left with 14 GB, what I have noticed since then... it seems as the updates rolls out, I'm starting to run out of space, I just did the "November 1511" update and I am now down to 5.75 GB free. Is there anything I can do to slim down Windows 10? or Should I just downgrade to a different OS?
View 3 Replies
Mar 5, 2016
I have been using file history on Windows 10. It is very unpredictable. File history is backing up to external drive, but it has coupled the entire "C" drive. In file explorer I have two "G" drives. I thought it only backup recent files not duplicate the drive.
View 7 Replies
Jan 7, 2016
I have been patiently waiting for a period of 1 hour looking at the screen of my laptop. At this present moment, Windows is stuck 'Scanning and Repairing Drive D: 9% Complete'.
View 5 Replies
Nov 13, 2015
How do you clone a Hard drive with EaseUS? Or any other software! Do you just scan hard drive for files Etc. and export the results on to your external hard drive.
View 1 Replies
Dec 29, 2015
I have Windows 10 installed on my SSD primary drive. I also have a 4 TB RAID 10 array that I want to remove to reutilise the disks in my new NAS. However...
If I remove the drives, windows won't boot. I've seen various errors, but basically it loads to logo, spins round and round and then halts, usually with "inaccessible boot device".
View 9 Replies
Nov 21, 2015
I finally had to set up a dual boot with Ubuntu so that I could browse the net in peace. The constant clicky-clack of my hard drive drove me nuts. Windows lately has not given it a rest. Ubuntu on the other hand hardly ever causes overuse of the hard drive. Windows needs to get a handle on this problem..
View 3 Replies
Nov 20, 2015
Ever since I upgraded to Windows 10 Pro 64-bit, programs, especially games, suddenly halt and the disk light comes on. This is especially annoying during games as everything halts on-screen until the disk light goes off. I was just playing Assassins Creed Syndicate and the dialog would go silent while the disk light was on. It's almost like Windows 10 is halting while a load is taking place.
I originally thought my games disk was beginning to age but this happens in IE, Firefox, Thunderbird, etc., which are on a different disk.Does Win 10 have a disk management issue? I just happened to think that my page file is on a separate disk from Win 10 and my games. Could this cause an issue?
View 3 Replies
Dec 2, 2015
After spending two days to get my computer reprogram after a Diskpart failure I want to do a backup on the drive. Is the Windows10 backup good to use,or do I need something else. If I do a complete backup can I restore it to another formatted drive ?.
View 9 Replies
