Performance :: Cannot Edit Or Write To Registry
Feb 10, 2016
I have been working with windows 10 X64 PRO for a little bit now. I can still not figure out why my scripts (.vbs) or .exe that I push to or use on my domain machines will not edit or create keys in the registry. The only way i can do it is to full kill UAC then reboot then make changes then turn it back on then reboot again. Listed below our the UAC settings we have set for our select few windows 10 machines. We have UAC fully off in windows 7, but it is needed in windows 10 to have apps run.
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem]
"ConsentPromptBehaviorAdmin"=dword:00000000
"ConsentPromptBehaviorUser"=dword:00000000
"EnableInstallerDetection"=dword:00000000
[Code] …..
What I need to do so i can make registry change on the fly. This going to be a big deal breaker for us to move to Windows 10 if i can not change values.
View 1 Replies
Similar Messages:
Dec 15, 2015
Windows 10 Automatically installed the build that came out about 10 December. When I did the install, the NUM LOCK refuses to work on the right hand keypad.
I searched for the registry edit and all I find is this fix [URL]..... The thing is, when I get to Keyboard, I've no strings to edit. I thought, "hey, permissions are an issue". But I give all the required permissions. I've disabled the FastStartUp / Boot and did a restart.
I'm willing to build DWord strings but I'm really rusty. I roll the system back to about about 2 December, and all is well. What the heck changed?
I'm in a Dell Studio XPS 9100. I thought "hey, let me get the driver updates for windows 10 and the keyboard" Dell forced me into the downloads for its backup (DSD I believe--hate that) and the system update check. In truth, I'm puzzled as to why my XPS9100 is supposedly a 64-bit system and all I get are 32-bit updates as well.
I know, lots of stuff going on. Anyhow, I'm stuck. I am deferring any upgrades where I can. I created a manual restore point so I can dump out anything that's forced on me and go back to where the darn keyboard works.
I'm the single user and the ADMIN. I've uploaded a screen print of the registry
Attached Files : regedit keyboard Phd Blonde.jpg 118.94KB
View 3 Replies
Nov 10, 2015
I've backed up my registry twice recently, and I noticed a huge difference in the size of the backup file. Two days ago, the backup I created was 18,066 KB. The one I created this morning is 247,691 KB. Should I be concerned about this, and, if so, what can I do about it?
View 3 Replies
Sep 15, 2015
I upgraded a workstation to Win 10 Pro. The system, System X, has two admin users, A and B. A is logged on to System X. Volume C is shared from the root on System X, and all admins on the system have permissions to Share C with full control. B is logged on to another system, System Y (Win 8.1). B can access (read) almost all folders on System X from System Y, but cannot write to the folders as he did in the past. I included a screenshot of the sharing options, which are the same for all networks, though Network Discovery is off.
View 9 Replies
Jan 4, 2016
I have a Freenas Server (based on FreeBSD Unix) connected to my network. I can't get it to show up in file explorer untill I type "//000.000.000.000" (it's IP address). When I try to drag a file to the window CIF shares (Permissions in Unix are Allow Guest Access and Recursively set sane default windows permissions on share) I get the error "You Need Permission to Perform this Action". Both of these features worked on Win 7 Pro before I did an upgrade to Win 10 Pro. I also did a fresh install of Win 10 Pro and it made no difference so I restored a Macrium image of the Win10 Pro Upgrade.
View 8 Replies
Oct 27, 2015
( do you want to allow this app to make changes to your pc ( yes ) ( no )). And we all know the pros and cons of disabling the UAC. Wouldn't it be good if the Yes Box was automatically Clicked for you. All we need is some type of Batch File that would specifically watch for that Message and Answer it for you. Or maybe hidden deep within the registry it may be possible Tick the right Box to do it for us. Looking for some Positive Answers.???
View 3 Replies
Aug 15, 2015
My standard Documents located in C:users...documents is no longer a writable folder following upgrade to Windows 10. Affects Visual Studio, Outlook and some other software. eg for Visual Studio 2013: CurrentSettings.vssettings cannot be written. I own the folder of course and attempts to remove the "Read Only" flag appear to work and then immediately fail when I attempt a write operation to a file in one of the folders. I am administrator but this doesn't useful. Also logged on as a local user instead of Windows Live account, but same results.
View 6 Replies
Oct 16, 2015
As described above, I have games with varying degrees of the problem. Some cannot save settings, still some other cannot save game progression, the worst has it both. I was able to do various workarounds that let me partially solve the problem.
However, I hit a block with my newly installed Metro Last Light Redux, it doesn't write any saves anywhere. I Googled my problem and no solution fit me, I tried writing an "attrib" modification on "My Documents" using an elevated command prompt to rid the "Read-Only" attribute but that still didn't work. I tried taking ownership of the folders in question but still nothing.
View 1 Replies
Aug 8, 2015
I have only one active account on Windows 10, and it xy -> account type is administrator. My UAC settings are set to never notify. Now every program that i run is not run as admin (as was the case on windows 7) but rather as normal user account. Is there a way to change that globally?
Some problems that i have because of that: Torrent program can't write on disc (first time i see this), all games can't update and write to disc, they run fine tho. I usually let BSPlayer to download subtitles and write them in movie folder that doesn't work as well. If i right click -> run as admin program s work fine but it's a hassle i want to avoid.
View 1 Replies
Oct 11, 2015
I recently upgraded to windows ten but ever since I did my computer keeps telling me I do not have the correct permissions to read/write files. I have tried to change the settings to allow the one and only account the permissions. It works temporarily but after a few days it goes back to not allowing me again. I also tried activating the built in administrator account to save files but of course a built in administrator account cannot access the same things as the original account can.
View 4 Replies
Oct 11, 2015
DVD-RW are re-writable correct? I tired to format it and it said i couldn't because of write protection is there any way I can remove the write protection on it?
View 2 Replies
Oct 3, 2015
Today i turned my computer on and for some reason I cant restart it( the shutdown/restart on the right bottom corner is locked) and my password is locked(cant write it).
View 1 Replies
Dec 10, 2015
I disabled UAC & i'm using the only account on this system, which is admin. Yet i'm not allowed to write to C roots and being ask to write in many other places.. How do i disable that & i'm having admin rights ALL THE TIME while using my admin account..?Ok so what i mostly need is the ability (permanently) to write to C: disk root. How do i do that?
View 9 Replies
Oct 3, 2015
Today i turned my computer on and for some reason i cant restart it( the shutdown/restart on the right bottom corner is locked) and my password is locked(cant write it).
View 1 Replies
Sep 7, 2015
Normal PC that was running win 7 Pro. Had an HP 1260 Lightscribe drive. Burned CDs, DVDs AND Lightscribe labels... Worked perfectly. Worked for years. I know how to use it.
Upgraded from Win 7 to Win 10 Pro. Concurrently, my hp 1260 died and I bought a TSST L632M USB Lightscribe drive. I plug is into a USB port AND IT WORKS. It burns CDs. It burns DVDs. It does NOT burn Lightscribe labels. Drive is clearly marked "Lightscribe". The Internet SAYS it's a Lightscribe drive.
The Lightscribe service is running. The Lightscribe Control Panel SAYS IT'S THERE. The DISK is a TDK and clearly marked "Lightscribe". As near as I can tell, it should work.
The Lightscribe template labeler goes through the WHOLE process of "writing" with the animation showing the text being written. BUT, the drive LED never flashes, and nothing gets written.
I tried it on a SECOND machine - one running Win 10 HOME. Same result. Unfortunately, I've upgraded all four PCs to either Win 10 Pro or Win 10 Home, so I no longer have a Win 7 PC to try the drive on.
WHY this thing won't do what it's clearly marked to do? Driver of some sort?
View 9 Replies
Feb 2, 2016
I tried CMD, StorageDevicePolicies in Regedit but nothing. Still Write Protected.
View 3 Replies
Jan 1, 2016
Everytime I wake up my desktop from sleep, I get the BSOD with the message - Attempted Write To Readonly Memory, and the system restarts. I have this problem for a few months now, since I was on Windows 7. I thought the problem might go away after upgrading to Windows 10. But even after the upgrade, the issue still remains. It is pretty annoying as I can't leave my system idle for a few minutes. I'm attaching recent dumps and msinfo file ....
View 1 Replies
Jan 17, 2016
My computer delivers a BSOD and reboots when I get to about 95% through a Windows backup. The error message points to VHDMP.SYS. It's actually failed intermittently for some weeks and then backed-up okay but today some 10 attempts have all failed. I've tried checks to the limit of my technical capabilities (checked disk and memory).
View 5 Replies
Aug 17, 2015
I have upgraded to window 10 about a week ago and I have Samsung DVD Write SH224DB/RSMS DVD supawriter, in my pc desk top pc and since upgrading to windows 10 I can't use it, it do's not even show in the devise manager or any online hardware dives programs.I do know it has power to the device but will not read and disc or film disc.
View 5 Replies
Aug 12, 2015
I have PhotoShop which runs fine under win10 bty BUT I really like the little Photos app for quick editing however. It doesn't work all the time.
The app itself never fails to launch but with about half of the pictures that I try to edit give me the error that says "Can't edit" YOU CAN SEE A SCREEN CAP OF THIS EXACT ERROR.
Now, I have checked permissions of the files and even with photos with identical sets some will edit with no issues and the others get that same exact error message!
I have done everything I can think of including uninstalling the Photos app and then reinstalling it from the store. DID not change anything.
Yes, all of the jpg default programs are set to the Photos app (triple checked all those).
View 1 Replies
Jan 31, 2016
Windows 10 downloaded and can't edit my current documents, why?
View 1 Replies
Jul 31, 2015
I downloaded Windows 10 manually using the official tool from Microsoft's website (MediaCreationTool). It installed ok but then once it finally booted thats when problems started.Windows 10 doesn't recognize my gpu (Asus GTX 960 Strix 2GB) and I cannot edit or open the control panel/settings application! This means I cannot edit any settings.Windows 10 looks like a brilliant OS but seems to be failing compared to Windows 7 (my old OS).
View 1 Replies
Jan 23, 2016
How to edit contact information in windows live mail 2012
View 4 Replies
Oct 14, 2015
When I open group policy editor, began with build 10547 and is still happening with 10565.
If I click OK, it disappears, then pops up a second time, click OK again and it's gone, can do whatever editing I need to and the edits stick, so it does seem to have compromised the editor, just more of an annoyance .
View 2 Replies
Jul 30, 2015
It used to be in Personalization under themes. It permitted you to open the current theme and edit (add or remove pictures) from the theme. The function seems to have been left out in Windows 10, and was available in previous Windows versions.
View 3 Replies
Aug 3, 2015
My context menus are already bloated by various software I installed. How do I remove items from there?
View 2 Replies
