So I've and tried some more and I cannot seem to get my PC to Sleep. I was upgraded to Windows 10 Pro from Windows 7 Ultimate. It's a custom built rig for gaming and streaming movies. Not sure why, but I put it on sleep, I see the PC go down as if it's in sleep mode and then I leave the room. I go by the room again and the PC is back on.
View 3 Replies
I seem to be having problems where my PC wont sleep after 30mins as its set to.
View 2 RepliesI am having trouble getting my computer to sleep.
View 9 RepliesI've tried everything I've read but nothing will make my PC sleep. It worked fine with Windows 8.1 but since 10 it doesn't matter what I change, the only way to make the PC sleep is to do it manually.
Here are some of the steps I've followed with no success:
- powercfg /requests shows nothing
- powercfg /energy doesn't show anything interesting
- no media sharing is enabled
- homegroup is disabled
- disabling NIC has no effect
- removing everything from the PC other than power and HDMI for video has no effect
- everything but my mouse is set not to wake pc (I have also tried with the mouse also set to no avail)
- updated drivers where possible
The weird thing is if I don't log onto the PC from a reboot, it will sleep just fine - the minute I log on it refuses to auto sleep. Also, if I boot into Safe Mode, the sleep works just fine again.
It's combined with the auto setting for windows update (despite having disable wake timers selected) the PC will sometimes wake in the middle of the night and stay on until I sleep it again.
I hear the computer turn back on and the light is on, but the screen is still black. My mouse and keyboard are unresponsive (can't turn backlight on). I have to do a hard shut down. When it's back on, it's like it woke up from sleep mode, not a fresh restart.
This just started happening today I think so I did a system restore, but the problem persists. The only thing I remember doing today was updating my ATI drivers.
i am using windows 10 since last two weeks..since installation i am facing this issue .. my pc goes into sleep mode without any reason..suppose i am working on anything ..like i am watching you tube videos or anything..suddenly my screen changes to black and my pc then goes into sleep mode..then i press the power button ..and it again resume the windows...i tried everything .like updated the drivers and other settings..but no results .
View 4 RepliesPost W10 Installation - my computer constantly wakes up from sleep. It just will not stay asleep no matter what, I thought it was my mouse so I went into my device manager and changed it so it didn't have the ability to wake up my computer. It stopped for a little while at least that's what it seemed, must have been coincidence because now its happening again. Which is weird because I went into power settings and turned "Wake Timers" off completely, it's now switched to disabled. Yet whenever I runcmd and type "powercfg -waketimers" as it reccomended here [URL] .... to find out which timers are on.
It says something about volume 2 on one of my hdd's, some stuff that doesn't make much sense to me. If you need me to paste the cmd info you're going to have to tell me how. Also when i type "powercfg -devicequery wake_armed" it lists "HID Keyboard Device" and "HID Keyboard Device (001)." Maybe the latter is what's waking my computer? I figured that was just another name for my keyboard or something, all I want is my computer to stay asleep and only my corsair keyboard to be able to wake it up.
Also everytime it wakes up I type "powercfg -lastwake" into the cmd and it doesn't give me any info. It says "wake history count -1" and the other 2 stats are 0, followed by no text or information. Also I forgot to mention but when it wakes up as of now, the display will actually stay off but the computers lights and everything are on. Whereas before when I thought it was the mouse waking it up, the whole computer would turn back on, display and all.
Windows 10 is simply not able to enter sleep mode. Whenever I try, the monitor shuts off, but the computer power does not. When I move the mouse, the log-in screen appears (as it would when your computer comes out of sleep).I looked at Windows Event Viewer, and this is what I found for my attempt to sleep just a moment ago (Event 10016, DistributedCOM):"The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {D63B10C5-BB46-4990-A94F-E40B9D520160} and APPID {9CA88EE3-ACB7-47C8-AFC4-AB70 2511 C276} to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool."
I went to these IDs in regedit, and attempted to change their security permissions. I received an error message saying "Unable to save permission changes on {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}" (or the CLSID).Looking at the above CLSID registry entry more closely, I find that it corresponds to a program called RunTimeBroker.exe. The official Windows website has instructions on how to change the permissions for this program, namely, by opening Component services, going to RunTimeBroker, opening its Properties, and adjusting its Access Permissions in the Security tab.
Recently I have been finding my PC powered up when it should be sleeping. Using powercfg -lastwake does not show a cause but looking at system events I can that there are a series of events each day starting at 08:59:31. One of these is a Power - Troubleshooter event which says that the system has returned from a low power state but Wake Source is unknown. This and the other messages are ones that normally appear if I wake up the PC manually. There are subsequent events from Windows Update so I thought that might be the cause but it does not run immediately and I now believe that it is running because the PC has woken up and is not causing it to wake.
I have checked in Power Options Advanced Settings/Sleep and Allow wake timers is set to disabled.i have checked that on my network adaptor, 'Allow this device to wake the computer' is not checked.I have checked Control Panel/Security and Maintenance/Automatic Maintenance and Allow scheduled maintenance to wake my computer at the scheduled time is unchecked.
I had also checked in Task Scheduler and under WindowsUpdate there are 4 tasks but under Conditions, none are set to 'Wake the computer to run this task'.Checking back through the event logs it seems that this problem first happened on 27th Sep and always happens at 08:59:31. I have looked at the event log for the previous day and can see some events relating to the installation or update of a device driver although I haven't made changes to the hardware for a long time. It is followed by an event relating to Disk 3 which I don't normally have so I assume these were as a result of plugging in a USB device. There are also events relating to a windows update of VCLibs 12. how I can track down the culprit?
After I upgraded to Windows 10, my system won't go to sleep automatically. The display will turn off after the idle time I've set but the computer remains on. I've tested with setting it to sleep after being idle for 1 minute, and only the display turns off. If I manually go to Power -> Sleep in the Start Menu, it will go to sleep.
View 9 RepliesI have a custom built PC. Ever since then I haven't been able to go into sleep mode. As soon as I click Sleep the system powers down for few seconds then powers straight back on to show me login screen.
What I've tried so far is doing a reset with Windows 10 Pro to wipe everything but keeps files on SSD which is my primary. I disconnected my HDD which is for gaming and music so that it wont get touched. As I'm typing this the issue hasn't been fixed. The only thing that I did was some updates for OS, and that's it! I'm completely puzzled by what is happening.
As soon as I stop typing, the system goes to sleep after approximately 5 seconds. All my power options is Never Sleep.
View 1 RepliesWhen entering Sleep Mode the computer is turned off.
Performance indicates that Sleep Mode is set for 30 minutes which I have not used, but when I leave my computer and manually select Sleep Mode is when the computer is turned off.
I checked the network adapter for the "allow this device to wake the computer" and all were unchecked
How do I get Sleep Mode to go to sleep with a manual setting?
My computer will go to sleep after 30 minutes, as scheduled, but only if I have not signed in to my user account. Once I sign in, it will not automatically sleep, and the monitor will not dim.
What processes are likely to be interfering with sleep? I can put it into sleep manually, and it will stay asleep. but it won't do so automatically, if I am signed in.
I updated to W10 and have had no problems and this one really isn't a big deal but it's got my OCD going. I have sleep set after 25 minutes and that seems to work fine. It comes out of sleep pretty well too. But, it seems that ovenight, the system shuts down on it's own.
I've looked at the logs and scheduler and it seems that the UpdateOrchestrator was set at 3:30 am so I changed that time to 6:30 PM and the system turned off overnight again.
So, I left it awake one night and it did not shut off. Tried again the next night and it turned off. I'm going to try to remove the schedule entirely but from what I've read over the last few weeks, it will create a new task again.
What UpdateOrchestrator really does despite all my googling and don't have this problem on any other PC so I'm wondering if it has to do with hardware. WhoCrashed does not report any crashes at all. Nor do the logs tell me anything.
Other than going through each and every task in the task scheduler, is there a way to see those that are allowed to wake the machine while it is sleeping? My PC woke up this morning at 3:30 am. It then went back to sleep about ten minutes later. I've checked all of the normal things (no auto-maintenance, etc.) so I' suspecting it is a task that woke the PC up.
View 2 RepliesIn W10 when I leave my laptop in sleep mode overnight, it uses about 10% of battery life. In windows 7 it was way less, to the point that it wasn't even noticeable.
where I should start looking?
I have a Thinkpad X220T
My new Asus Win10 machine with a solid-state hard drive wakes up from sleep refreshingly quickly -- just a couple of seconds. But it takes between 15 and 40 seconds before the Internet connection is re-established. Once the connection is re-established, it works fine. But that delay is annoying. Can I do something to speed up the re-connection?
I don't know where the delay is coming from. My NIC is plugged directly into my Comcast cable modem -- no other routers or the like involved. The NIC on the machine claims to be an "Intel Ethernet Connection (2) 1219-V", running driver version 12.13.17.4, which is claimed to be the current version. The "Power Management" tab in Device Manager for the NIC lists three power-saver options, all of which are enabled (that is, the boxes are checked):
Respond to ARP requests without waking system
Respond to NS requests without waking system
Energy Efficient Ethernet
(I am attaching a PNG of the Power Management tab.) These options suggest that the NIC should be able to keep the Internet connection alive, even during sleep. So I don't know why I am experiencing a delay in re-establishing the connection.
On my Desktop, whenever I go to Start > Power > Sleep , when I come back from Sleep the Start window is still open. In Windows 7 we came back to a clean desktop. It does this on 3 PCs.
View 5 RepliesYesterday I installed some updates on my computer, however when it was rebooting it sat there for about an hour doing nothing. Eventually I force turned it off and tried to reboot it, however it kept doing the same thing. I looked up any fixes I could find, the only thing I saw was to try and boot it in safe made (Ctrl-Alt-Del then holding shift while clicking restart) even that still just sat at the red loading screen with the dots spinning in circles. I force shut it down a few more times and retried it, until I finally just let it sit there and finish, hoping it would have a time out feature. Well eventually it booted to the login prompt after 4 hours.
New issue is that whenever I close my laptop to put it to sleep, and then reopen it it looks fine but when I swipe away the cool picture, theres no login prompt. It looks just like the screen when you press ctrl alt delete. So I told it to do a regular restart, and upon rebooting it was stuck at the spinning dots on the red screen for 3 more hours before it booted. I understand I can just turn off putting the computer to sleep when I close the lid, and just darken the screen. I've already done that, I'm looking for a more permanent fix.
Since the 19th when my computer installed the following updates
Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3135173)
Update for Microsoft Visual C++ 2012 Update 4 Redistributable Package (KB3119142)
Security Update for Adobe Flash Player for Windows 10 Version 1511 for x64-based Systems (KB3135782)
it will no longer fully shut down. Having encountered this issue when I first upgraded to 10 I went to turn off hybrid sleep, and the option is currently disabled on the device. However, the only way to fully shut it down is to hold the power button till it shuts off.
Is there any way to fix this? I'd rather not have to unplug everything every time I shut it off just so the lights won't keep me awake.
My PC is often waking from Hibernate or sleep mode and I'm struggling to work out why. Is there a way of finding out what the cause is in event viewer?
View 1 RepliesWhen I put my laptop to sleep and then attempt to wake it up, it will power on (going through the boot up screens) instead of just waking up, thus causing me to lose any information open on the computer.
I have tried a few things to try to wake it up to no avail:
sfc /scannow in cmd
unplug all usb devices before going to sleep/waking up
rollback graphics drivers
resetting power plan settings and power button settings back to default state
Is there some memory dump file to fix this?
My laptop, running Windows Ten from a clean install, has issues with the sleep function. About once a day, when I either put the computer to sleep or when it does it on its own, the screen will go black but the computer will not stop running. All the lights are on, the fan and disks keep running. Nothing works to turn the screen back on and my only option becomes to force a shut down.
I've tried tweaking all the power options in various ways, I've tried disabling/enabling hibernation/fast start and I've searched for an answer but I do not have one.
I've notice that on windows 10 and 8.1, task manager would show the my max cpu core speed is 2.3-2.4 ghz. However, my Core 2 Quad q8400 is rated at 2.66 ghz. I tried changing the power settings in windows and try lowering my cpu temperature, but my speed would never reach 2.66 ghz.
View 7 RepliesMy PC performance with Windows 10 is very good except when it isn't
One of the things that is perplexing me is that my external hard drives seem to be impacting my startup performance. Following start up Task Manager performance tab shows one of my external drives (G) working at nearly 100% and the noisy disk drive suggests that it is working hard. The disk transfer rate also indicates movement between the PC and the drive. This is despite Drive G being used only as a storage/backup device with no automated actions configured. Yesterday Drive G became very hot as a result.
If I disconnect Drive G, my second external hard drive Drive F takes its place and task manager shows the same activity as previously shown on G. If both drives are connected F shows no activity.
