Performance :: Computer Will Not Sleep?
Jun 11, 2015I am having trouble getting my computer to sleep.
View 9 RepliesI am having trouble getting my computer to sleep.
View 9 RepliesI hear the computer turn back on and the light is on, but the screen is still black. My mouse and keyboard are unresponsive (can't turn backlight on). I have to do a hard shut down. When it's back on, it's like it woke up from sleep mode, not a fresh restart.
This just started happening today I think so I did a system restore, but the problem persists. The only thing I remember doing today was updating my ATI drivers.
After I upgraded to Windows 10, my system won't go to sleep automatically. The display will turn off after the idle time I've set but the computer remains on. I've tested with setting it to sleep after being idle for 1 minute, and only the display turns off. If I manually go to Power -> Sleep in the Start Menu, it will go to sleep.
View 9 RepliesMy computer will go to sleep after 30 minutes, as scheduled, but only if I have not signed in to my user account. Once I sign in, it will not automatically sleep, and the monitor will not dim.
What processes are likely to be interfering with sleep? I can put it into sleep manually, and it will stay asleep. but it won't do so automatically, if I am signed in.
My laptop, running Windows Ten from a clean install, has issues with the sleep function. About once a day, when I either put the computer to sleep or when it does it on its own, the screen will go black but the computer will not stop running. All the lights are on, the fan and disks keep running. Nothing works to turn the screen back on and my only option becomes to force a shut down.
I've tried tweaking all the power options in various ways, I've tried disabling/enabling hibernation/fast start and I've searched for an answer but I do not have one.
So I've and tried some more and I cannot seem to get my PC to Sleep. I was upgraded to Windows 10 Pro from Windows 7 Ultimate. It's a custom built rig for gaming and streaming movies. Not sure why, but I put it on sleep, I see the PC go down as if it's in sleep mode and then I leave the room. I go by the room again and the PC is back on.
View 3 RepliesI seem to be having problems where my PC wont sleep after 30mins as its set to.
View 2 RepliesI've tried everything I've read but nothing will make my PC sleep. It worked fine with Windows 8.1 but since 10 it doesn't matter what I change, the only way to make the PC sleep is to do it manually.
Here are some of the steps I've followed with no success:
- powercfg /requests shows nothing
- powercfg /energy doesn't show anything interesting
- no media sharing is enabled
- homegroup is disabled
- disabling NIC has no effect
- removing everything from the PC other than power and HDMI for video has no effect
- everything but my mouse is set not to wake pc (I have also tried with the mouse also set to no avail)
- updated drivers where possible
The weird thing is if I don't log onto the PC from a reboot, it will sleep just fine - the minute I log on it refuses to auto sleep. Also, if I boot into Safe Mode, the sleep works just fine again.
It's combined with the auto setting for windows update (despite having disable wake timers selected) the PC will sometimes wake in the middle of the night and stay on until I sleep it again.
It used to be intermittent - now not at all....
View 3 RepliesWhen I first bought this desktop, after the prescribed amount of time of inactivity (it may be something like 15-20 minutes), the computer would go to sleep.As I've used it more, I've added a few different software items here and there. This computer is mainly used for school and leisure work, so there are no "heavy duty" programs on there. Recently, however, I've noticed that the computer will continue to stay on and the fan running (or something is humming) all of the time. Is there a way to check what program may be running that makes the computer think there is activity, when there is none?
View 2 Repliesi am using windows 10 since last two weeks..since installation i am facing this issue .. my pc goes into sleep mode without any reason..suppose i am working on anything ..like i am watching you tube videos or anything..suddenly my screen changes to black and my pc then goes into sleep mode..then i press the power button ..and it again resume the windows...i tried everything .like updated the drivers and other settings..but no results .
View 4 RepliesPost W10 Installation - my computer constantly wakes up from sleep. It just will not stay asleep no matter what, I thought it was my mouse so I went into my device manager and changed it so it didn't have the ability to wake up my computer. It stopped for a little while at least that's what it seemed, must have been coincidence because now its happening again. Which is weird because I went into power settings and turned "Wake Timers" off completely, it's now switched to disabled. Yet whenever I runcmd and type "powercfg -waketimers" as it reccomended here [URL] .... to find out which timers are on.
It says something about volume 2 on one of my hdd's, some stuff that doesn't make much sense to me. If you need me to paste the cmd info you're going to have to tell me how. Also when i type "powercfg -devicequery wake_armed" it lists "HID Keyboard Device" and "HID Keyboard Device (001)." Maybe the latter is what's waking my computer? I figured that was just another name for my keyboard or something, all I want is my computer to stay asleep and only my corsair keyboard to be able to wake it up.
Also everytime it wakes up I type "powercfg -lastwake" into the cmd and it doesn't give me any info. It says "wake history count -1" and the other 2 stats are 0, followed by no text or information. Also I forgot to mention but when it wakes up as of now, the display will actually stay off but the computers lights and everything are on. Whereas before when I thought it was the mouse waking it up, the whole computer would turn back on, display and all.
Windows 10 is simply not able to enter sleep mode. Whenever I try, the monitor shuts off, but the computer power does not. When I move the mouse, the log-in screen appears (as it would when your computer comes out of sleep).I looked at Windows Event Viewer, and this is what I found for my attempt to sleep just a moment ago (Event 10016, DistributedCOM):"The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {D63B10C5-BB46-4990-A94F-E40B9D520160} and APPID {9CA88EE3-ACB7-47C8-AFC4-AB70 2511 C276} to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool."
I went to these IDs in regedit, and attempted to change their security permissions. I received an error message saying "Unable to save permission changes on {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}" (or the CLSID).Looking at the above CLSID registry entry more closely, I find that it corresponds to a program called RunTimeBroker.exe. The official Windows website has instructions on how to change the permissions for this program, namely, by opening Component services, going to RunTimeBroker, opening its Properties, and adjusting its Access Permissions in the Security tab.
Recently I have been finding my PC powered up when it should be sleeping. Using powercfg -lastwake does not show a cause but looking at system events I can that there are a series of events each day starting at 08:59:31. One of these is a Power - Troubleshooter event which says that the system has returned from a low power state but Wake Source is unknown. This and the other messages are ones that normally appear if I wake up the PC manually. There are subsequent events from Windows Update so I thought that might be the cause but it does not run immediately and I now believe that it is running because the PC has woken up and is not causing it to wake.
I have checked in Power Options Advanced Settings/Sleep and Allow wake timers is set to disabled.i have checked that on my network adaptor, 'Allow this device to wake the computer' is not checked.I have checked Control Panel/Security and Maintenance/Automatic Maintenance and Allow scheduled maintenance to wake my computer at the scheduled time is unchecked.
I had also checked in Task Scheduler and under WindowsUpdate there are 4 tasks but under Conditions, none are set to 'Wake the computer to run this task'.Checking back through the event logs it seems that this problem first happened on 27th Sep and always happens at 08:59:31. I have looked at the event log for the previous day and can see some events relating to the installation or update of a device driver although I haven't made changes to the hardware for a long time. It is followed by an event relating to Disk 3 which I don't normally have so I assume these were as a result of plugging in a USB device. There are also events relating to a windows update of VCLibs 12. how I can track down the culprit?
I have a custom built PC. Ever since then I haven't been able to go into sleep mode. As soon as I click Sleep the system powers down for few seconds then powers straight back on to show me login screen.
What I've tried so far is doing a reset with Windows 10 Pro to wipe everything but keeps files on SSD which is my primary. I disconnected my HDD which is for gaming and music so that it wont get touched. As I'm typing this the issue hasn't been fixed. The only thing that I did was some updates for OS, and that's it! I'm completely puzzled by what is happening.
As soon as I stop typing, the system goes to sleep after approximately 5 seconds. All my power options is Never Sleep.
View 1 RepliesI have installed W10 twice using the update feature. Everything work fine except when I want to shutdown or put the machine to sleep by clicking on those options, the machine makes noise like the HD is working. It then just shuts down and reboots again. The only way I can shut it off is by using the button on the computer.
View 2 RepliesToday when I turned on my computer, it has failed to sleep. I followed 2 tutorials on how to fix the issue. None have seemed to work. I even restarted my system and it still won't sleep.
View 2 RepliesAfter I upgraded from Windows 8.1 to Windows 10, my sleep feature quit working properly. There was a point in time a couple months back it did work, but since I hardly use it I didn't notice a problem. Recently I decided I'd start using it, and that's when I noticed the problem. When I go to sleep mode, it goes to sleep, but than when I bring it out of sleep mode it just restarts. I don't get any kind of error message at all, and as far as I can tell my power settings are set right. One suggestion I found suggested to revert my driver for Intel Management Engine Interface from version 10 or 11 to 9.5. I just reformat my hard drive and start over. I'm trying to avoid that at all costs. I see suggestions on the settings in BIOS. Which settings in particular should I look to change?
View 9 Repliesmy computer is not going in sleep mode even my settings are in sleep mode.
View 1 RepliesIt is fitting that I should start this discussion on the new Win10 site. With the latest update to 9926, I finally got the sleep menu to show up (updating the graphics driver) but the computer will not automatically go to sleep at the appropriate time. The other versions worked. I doubt this will last as I expect more updates to fix this but so far, the usual suspects have been tried and it is non functioning.
The sleep button and the power button set to sleep work fine. So far, nothing has woken it up but I have a sneaky suspicion that Homegroup now wakes up the computer when another machine asks for its shared folders.
Upgraded to Windows 10 and now the computer wakes itself from the sleep. I have already disabled network adapter, mouse and keyboard from waking the pc. I have also disabled scheduled tasks from being able to wake the computer.
View 1 RepliesI set my computer to sleep after 25 minutes, and it worked until the day before yesterday. Since then it just doesn't go sleep automatically but I can put it into sleep mode manually. I guess I might installed something that doesn't let it sleep. But I only installed Origin in the last days, and it's not even running.
View 1 RepliesWhen entering Sleep Mode the computer is turned off.
Performance indicates that Sleep Mode is set for 30 minutes which I have not used, but when I leave my computer and manually select Sleep Mode is when the computer is turned off.
I checked the network adapter for the "allow this device to wake the computer" and all were unchecked
How do I get Sleep Mode to go to sleep with a manual setting?
How do I prevent my computer from going into a deep sleep after inactivity?
I have hybrid sleep off. Whenever I try to wake it up, it doesn't respond to any of keys except for the power button. That leads me to thinking it's been shut down, crashed, or is in a deep sleep. I don't think it has crashed.
Do I need to disable hibernation? If so, how do I turn it off permanently?
The title says it all. When I put the computer to sleep, every few hours it turns back on. I cannot seem to find the problem in any power option. I made sure that my drivers do not wake up my computer in sleep.
View 3 Replies