Performance :: Continuing DCOM Event Viewer Error
Jan 1, 2016
I recently started getting this error in event viewer. There are a number of threads across the web about it, but none of them has presented the solution. The error is related to Runtimebroker.exe.
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
View 3 Replies
Similar Messages:
Aug 23, 2015
I have an SP3 running Windows 10. Finding this continuous error in the event viewer?
DistributedCOM
Event ID 10010
The server {7006698D-2974-4091-A424-85DD0B909E23} did not register with DCOM within the required timeout.
I looked up the ID in the registry and came up with a REG_SZ, REG_DWORD, and REG_BINARY. One of the descriptions said "Out of proc server to enable Insider Hub and Feedback App scenarios to be reached from inside of its appcontainer".
View 1 Replies
Nov 30, 2015
I'm getting the following event viewer error every 15-30 minutes whenever a non-admin account is logged in.The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user XXYY SID (S-1-5-21-1462133472-353174448-3584519177-1002) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
I've tracked the AppID down to RuntimeBroker. I've found a few posts mentioning a similar error for this application under windows 8, and suggesting changing the security settings as described. When I try to do this though, all the settings for RuntimeBroker are disabled, and cannot be customised. I've tried launch the admin tool as administrator, but it's still locked down.
View 9 Replies
Jan 22, 2016
I fnd that I have the same error message appearing at about 10 second intervals (on one occasion over 21000 were logged). Details below:
Log Name: Application
Source: ESENT
Date: 22/01/2016 15:32:30
Event ID: 490
Task Category: (1)
Level: Error
[Code] .....
View 1 Replies
Mar 5, 2016
I recently re-installed W10, and used Kari's tutorial to move the Users folder to a partition on another disk, using the sysprep routine.
This is a list of W10s Environment variables that apply to my account (MS/user/admin):
Those that relate to my account all seem to be pointing to the right location (H:Users).
However, until I turned off 'Sync my settings', the event viewer was littered with errors regarding ESENT--Extensible Storage (database) Engine, recorded multiple times per minute in an infinitely repetitive sequence: Events 494, 454, 488 & 413. The 494 event is the trigger:
SettingSyncHost (2876) {068B89D8-0F81-40D5-A335-0959E66CAECB}: Database recovery failed with error -1216 because it encountered references to a database, 'C:UsersomnesAppDataLocalMicrosoftWindowsSettingSyncmetastoremeta.edb', which is no longer present. The database was not brought to a Clean Shutdown state before it was removed (or possibly moved or renamed). The database engine will not permit recovery to complete for this instance until the missing database is re-instated. If the database is truly no longer available and no longer required, procedures for recovering from this error are available in the Microsoft Knowledge Base or by following the "more information" link at the bottom of this message.
Any way of directing the SettingSyncHost process to the right location? The drive/partition label (C:) should be H:, but otherwise the path is correct, and the db file (which is a hidden, system file) exists in that location.
It's not a problem for at present, as I don't have any devices that use that account, and have turned off 'Sync my settings' via Account settings; but it may be in the future, and may also be an issue for those who have moved the Users folder and have devices that give them that syncing feeling.
Incidentally, virtually all references in the MKB describe permissions rather than location problems, and the "more information" link in Event Viewer (Event Log Online Support) provides no information (Page Not Found).
View 2 Replies
Aug 4, 2015
I continue to get this event in the Event Log under Audit Failure. I never had in Windows 8.1 and it started after upgrading to 10.
Cryptographic operation.
Subject:
Security ID:SYSTEM
Account Name:xxxx
Account Domain:xxxx
Logon ID:0x3E7
Cryptographic Parameters:
Provider Name:Microsoft Software Key Storage Provider
Algorithm Name:RSA
Key Name:51a92691-66f1-280f-d0db-59fad4f73491
Key Type:User key.
Cryptographic Operation:
Operation:Open Key.
Return Code:0x80090016
View 5 Replies
Feb 10, 2016
My PC is often waking from Hibernate or sleep mode and I'm struggling to work out why. Is there a way of finding out what the cause is in event viewer?
View 1 Replies
Aug 3, 2015
How can I construct a .bat file to clear entries in the event viewer.
View 2 Replies
Feb 10, 2016
For the past few weeks I've been seeing errors in the Event Viewer relating to the LockScreen. These only happen when waking the PC up from Sleep mode. The errors are:-
5973 Activation of application Microsoft.LockApp_cw5n1h2txyewy!WindowsDefaultLockScreen failed with error: The app didn't start in the required time. See the Microsoft-Windows-TWinUI/Operational log for additional information.
and
1002 The program LockApp.exe version 0.0.0.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.
Process ID: 133c
Start Time: 01d16111867ebe61
Termination Time: 4294967295
Application Path: C:WindowsSystemAppsMicrosoft.LockApp_cw5n1h2txyewyLockApp.exe
Report Id: e6af0181-cd07-11e5-9cad-6c626d3ed397
Faulting package full name: Microsoft.LockApp_10.0.10586.0_neutral__cw5n1h2txyewy
Faulting package-relative application ID: WindowsDefaultLockScreen
View 4 Replies
Nov 29, 2015
make the "Clear All Event Viewer Logs using a BAT file" self starting such as making it run automatically on a daily basis or show me what code I would need to add to it to do that for me. I would just love to clear out the 10016s and 7031s codes daily.
View 2 Replies
Jul 29, 2015
Just upgraded my Win 8.1 Pro 64-bit to Win 10, and Event Viewer shows literally hundreds of Errors and Warnings. My 8.1 was almost error-free. What gives? Can I re-do the upgrade and try again?
View 8 Replies
Sep 5, 2015
diagnose the kernel power event id 41 error I've been receiving. Upgraded to Win 10 on day 1 of launch 7/29 which the Event Viewer tells me was the date of my very first kernel power related crash.
I've updated most of my drivers by now and while the crashes are now less frequent, still occurring about once a day
View 6 Replies
Mar 8, 2016
I have an Windows 10 Pro. I want to know what caused this. Task manager and event viewer was not responding and some of the applications stop responding. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.
My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.
Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. It was related to windows/software or hardware?
View 3 Replies
Jan 3, 2016
I just got a Driver Power State Failure Bsod. Please find attached the dump files.
Event Viewer called up 'CtHdaSvc.exe' which is the SB Recon3D Service.
Checking Gigabyte for an update to the audio drivers.
No new driver on the Gigabyte site. Will reinstall.
View 2 Replies
Oct 20, 2015
Recently installed Office 2016 and it works fine, but i notice an Event Viewer error
SideBySide 35
Activation context generation failed for "C:Program Files (x86)Microsoft Office
ootOffice16lync.exe.Manifest".Error in manifest or policy file "C:Program Files (x86)Microsoft Office
ootOffice16UccApi.DLL" on line 1.
Component identity found in manifest does not match the identity of the component requested. Reference is UccApi,processorArchitecture="AMD64",type="win32",version="16.0.0.0". Definition is UccApi,processorArchitecture="x86",type="win32",version="16.0.0.0". Please use sxstrace.exe for detailed diagnosis.
View 1 Replies
Mar 31, 2016
I had fresh clean install of Windows 10 Pro in MBR scheme . I want to know what caused this.Task manager and event viewer was not responding and some of the applications was not responding too. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. Thx. It was related to windows/software or hardware?I made topic because some peoples told me that corrupt data , can be caused by faulty memory(( What is yours opinions? But like i said i test memtest86, Windows Diagnostics Memory and hdtune showing no errors. Maybe try GoldMemory or that will be waste of time?
View 14 Replies
Sep 21, 2015
I'm getting the following error:
Task Scheduler service found a misconfiguration in the NT TASKMicrosoftWindowsMedia CenterRegisterSearch definition. Additional Data: Error Value: %SystemRoot%ehomeehPrivJob.exe.
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-TaskScheduler" Guid="{DE7B24EA-73C8-4A09-985D-5BDADCFA9017}" />
<EventID>414</EventID>
[Code] .....
Windows 10 Home....
View 2 Replies
Nov 22, 2015
This is the event error after attempting to do a regular 'FIND' within the Registry. Before the Fall upgrade installed via .iso on 11/20/2015 this Find worked.
The Nirsoft Registry Scan will scan and find. I did not attempt to link to the registry from that Nirsoft tool
The last software installed was a Nirsoft My Event Viewer as a portable app 11/21/15.It had errors via ntoskrnl.exe when executed. Microsoft apps were updated automatically 11/21/15(Photos, Messaging)
These are the only changes since the fall upgrade Win10-1511
Would this be corrected by a sfc /scannow?
Log Name: Application
Source: Application Error
Date: 11/22/2015 8:14:13 AM
Event ID: 1000
Task Category: (100)
Level: Error
[Code] ....
View 3 Replies
Dec 4, 2015
What would be causing this?
svchost (3972) Database recovery/restore failed with unexpected error -566.
Many instances of this error in my event log.
Running windows 10 pro with November update....
View 9 Replies
Aug 29, 2015
Prior to upgrading to Windows 10, my system was running Windows 7 Home Premium SP1. When running my previous OS (WIN 7) I rarely had errors listed in Event Viewer. Now after upgrading to Windows 10, I get errors/warnings I never used to get under Windows 7.
The error is of the "Critical" level in Event Viewer.
After doing a normal shutdown, and then booting my system, I check Event Viewer and always find the following critical error:
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
---------------------- START: Event Viewer XML error text ---------------------
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
[Code] ....
I never used to get this error after doing a normal shutdown (prior to upgrade to Windows 10, when I was on Windows 7). Now it happens all the time. Why this error is occurring after doing a normal shutdown followed by a boot?
I suspect it's a glitch with the first production release of Windows 10, but I have no proof of that. My system runs fine, yet I get the above error (and a number of other errors) since I upgraded to Windows 10.
View 5 Replies
Nov 1, 2015
I want to stop error code 7031 from showing up in the event viewer log in win 10 (since its a redundant code that means nothing anyway), I do not mean just filtering it unless that is all that can be done, I want it gone.
View 1 Replies
Jan 9, 2016
I bought a new computer a month ago, and am having BSOD each day. It's a Kernel Security Check Failure, and when i look in the event watcher, I can see a kernel-power critical error.
DESKTOP-AE1GEPA-09_01_2016_100618,48.zip
View 9 Replies
Dec 7, 2015
Have had new win10 desktop pc a couple months now and all of a sudden my photos aren't viewable and live tile isn't working on start menu..
and a window pops up with "element not found " as attached.
Seems to be just my user (live account) which seems more strange.
Cant think of anything that I have done recently to make this happen either.??
Attached Files : Photo Error1.PNG 5.21KB
View 2 Replies
Jul 30, 2015
I have Win 10 preview build 10240 and up to date.I want to continue as windows insider, but I want to update to the final version, So if I wanted to remain as an insider, should I upgrade to the final version and connect it with my insider account or stay with my current build 10240....
View 1 Replies
Aug 4, 2015
I went through the install process of Windows 10. It installed, and then asked to restart. I allowed it to restart then nothing changed once it came back from a reboot. Still Windows 8. No popup showing install is continuing. Nothing.
View 1 Replies
Nov 9, 2015
I recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook.
I run DISM and I got the following error message:
1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online /Cleanup-Image /RestoreHealth
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
So I run the check again with an ISO image of Windows mounted in E, but I got the same error message.
2. C:WINDOWSsystem32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:E:SourcesInstall.wim:1 /LimitAccess
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Here is the log file [URL] ....
View 5 Replies