I've been trying to use DISM /Online /Cleanup-Image /Restorehealth on my Windows 10 Home, but it keeps telling me that it does not support servicing Windows PE with the /Online option. Of course I'm not running WinPE 10.
View 9 Replies
I recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook.
I run DISM and I got the following error message:
1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online /Cleanup-Image /RestoreHealth
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
So I run the check again with an ISO image of Windows mounted in E, but I got the same error message.
2. C:WINDOWSsystem32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:E:SourcesInstall.wim:1 /LimitAccess
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Here is the log file [URL] ....
I just completed a clean install of Windows 10 Pro...all was going fine, but I wanted to run both scf and DISM...
If SFC was not able to repair some or all of the files there are a few options including a repair install from the OS dvd, and DISM (win 8 & UP)
DISM
If you are on win 8 and up you can (and should) run DISM if SFC found errors it could not fix
From an DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:elevated command prompt*
Type DISM /Online /Cleanup-Image /RestoreHealth . (please note the space after "dism", & "online" & "image")
If the repair is successful you may want to re-run SFC just to check.
[URL]
Have never had this issue before...but I can't seem to be able to direct DISM elevated command to a .iso file:
To run a system file check (SFC)
Go to start
Type CMD
Right click and run as Administrator
(called an elevated command prompt)
If you want to verify and repair the OS type sfc /scannow (note the space between sfc and "/")
If you just want to check (verify only) the OS type sfc /verifyonly (no changes will be made using verify only)
If you get the error message "cannot find source files"you need to have an ISO file mounted and need to specify where it is located with the below command
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:* Where "X" is the drive letter where the ISO is located.* SourcesInstall.wim:1 /LimitAccessSimply change the "X" to the correct drive letter
If you do not have an ISO you can make one.* The instructions are here
*You may have to run this up to 3 times to fix all the problems
When you have finished it will say one of three things
Windows did not find any integrity violations (a good thing)
Windows Resource Protection found corrupt files and repaired them (a good thing)
Windows Resource Protection found corrupt files but was unable to fix some (or all) of them (not a good thing)* If you get this message run DISM as described below..
I also have the DISM log file which I would be more then happy to upload:
I can't run the command "dism /online /cleanup-image /restorehealth". Every time returns the error 0x800f081f.
View 4 RepliesI have a very old laptop, but despite the age it has worked relatively fine for my needs with just an HDD change. I bought this at the very end of Vista lifespan with an almost immediate Win7 upgrade offered. I then skipped Win 8 totally, but rolled a Win 10 when it came, and it has been working well. But you get the picture. This machine is old.
Onto the point: I'm getting an occasional fan rev up, with the CPU at 100%. The process is Service Host: Local System (Network Restricted). Recently, I also lost all sound on the computer, which chkdsk /f /r was able to salvage. I have a feeling these might relate to a same problem.
I researched, and found out that sfc /scannow will work. OK. It starts the verification process, but fails at 18% saying corrupt files exist. When I export the sfcdetails.txt from the log, it does not really report which files are corrupt so as to replace them. 00000e22 [SR] Beginning Verify and Repair transaction and then the logfile ends.
Because I cannot complete SFC, I'm told to run DISM, and that is how I ended up here. When I run Dism /Online /Cleanup-Image /RestoreHealth
Image version 10.0.10240.16384
At 20% an error 1726 with remote procedure call failed.
So I go to dowload the ISO and mount it. It will then give me the .esd
So I'm having my fingers crossed while running Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:SourcesInstall.esd:1 /limitaccess
I have a Lenovo W530 laptop, that started with Windows 7 Pro, then got upgraded to Windows 8, then 8.1, and now 10 Pro.
I have the factory setup disks for only 7 and 8.
I ran DISM and it says the source files could not be found. From a similar problem several months ago, I sort of know how to work with DISM, but if it is looking for Windows 10 files, where would I point DISM ?
My next step is to use the log files, and attempt to find which files are corrupted.
I ran sfc/scannow (trying to diagnose a sleep problem) and it found irreparable files, and I ran it again in safe mode, and again, irreparable.
I ran dism and it couldn't access the source files. (Afterwards, I checked windows update, and it says that the computer is up to date, and the last check was at the time I ran dism!)
Is this behavior normal for windows 10 pro x64?
Experienced plenty of issues with win 10 installations after upgrades from say WIN 7. The issues are just about all related to the disappearance of MS Edge and the Start Menu.
One should run the SFC /scannow command , followed by the more complicated DISM command and then finally the very complicated powershell command.
Almost no replies are made after one runs the SFC command and even the DISM command and no errors are found.
What should one conclude if the SFC command and the DSIM command report no errors? Secondly what is the best next step in trying to recover from the issue at hand?
W10 (64 bit Home) has been working OK on this laptop but recently I have been able to open the settings screen for only a micro-second. Having found people having the same problem I have tried running SFC several times, as suggested, but it says it found an issue it could not resolve.
Again following instructions on the forum I tried running DISM with an iso loaded and this hung at 40% for hours (overnight).
I do not understand what to look for in the log file, but there are several lines that mention an error. I attach the log file (zipped)....
Recently updated to windows 10 I've tried a scannow to resolve another issue and I get a failure message with files being corrupted. I've tried a reset keeping my files but where to look next. Attached is my log file from the SFC and the DISM log really stuck currently.
DISM
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Scannow
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log.
Note that logging is currently not supported in offline servicing scenarios.
How do I get HP ENVY 5530 printer online?
View 1 RepliesAfter Installing Windows 10, I encountered some problems. So, I tried to fix with dism.exe, but in vain.
Here's my SFC log : [URL] ....
I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.
I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.
I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).
I had upgrade to windows 10 from windows 7. I'm having problems with my directories. I have ran sfc & dism several times, below are the latest log files.
1. sfc /scannow - found file corruption, log file attached.
2. dism /online /cleanup-image /restorehealth - get 0x800f081f error, log file attached.
3. SFCFix.exe - no error found, log file attached.
cbslog.txt 3.79MB
dismlog.txt 447.82KB
SFCFix.txt 926bytes
I just upgraded to Win 10 from Win 7.
I get Error 0x800f081f when run DISM.exe and it states the source file can't be found. When I run SFC scannow I get nine files that can't be repaired.
Currently, whenever I am playing or starting up any online game (League of Legends, Maplestory etc.) My laptop will freeze with the audio becoming an incredibly loud buzzing sound, often saying that my headphones became unplugged even though they hadn't. When this happens the only way to get the computer to respond is to hard reset using the power button. This issue has persisted for a while now, and I have previously reported it to those over at sevenforums, although sadly that didnt end up getting resolved. Here is the link to that thread:
BSOD During Gaming(Mostly Online) nvlddmkm.sys,dxgkrnl.sys,dxgmms1.sys - Windows 7 Forums
If I run SFC it tells me I have corrupt files that it can not fix. When I tried to use DISM checking health says the files can be repaired yet if I run DISM with /online feature with out a source it says the same thing if I run it with a source which is it can not find the files needed. I have attached the CBS log and DISM log below in
View 4 RepliesI have an issue with my sfc and dism, as stated above. The issue started when i went to add windows features i get nothing but a blank box. Thinking there was some kind of corrupted file I ran a sfc scan only to get this, Beginning system scan. This process will take some time.
View 1 RepliesI'm getting the following event viewer error every 15-30 minutes whenever a non-admin account is logged in.The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user XXYY SID (S-1-5-21-1462133472-353174448-3584519177-1002) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
I've tracked the AppID down to RuntimeBroker. I've found a few posts mentioning a similar error for this application under windows 8, and suggesting changing the security settings as described. When I try to do this though, all the settings for RuntimeBroker are disabled, and cannot be customised. I've tried launch the admin tool as administrator, but it's still locked down.
I am using windows 10 for 6 months, from the two last weeks on, it was impossible to watch my favorite TV program. For the edge appear a message : Error loading media: File could not be played. Through the google crome it is impossible too, appear a message: Can not load M3U8: No levels in manifest. Before it works great, at the same TV online. I suppose that something is wrong with windows media player, I updated the windows 10 and the problem continues.
View 5 RepliesI fnd that I have the same error message appearing at about 10 second intervals (on one occasion over 21000 were logged). Details below:
Log Name: Application
Source: ESENT
Date: 22/01/2016 15:32:30
Event ID: 490
Task Category: (1)
Level: Error
[Code] .....
For the last 3 hours, I have tried several solutions to resolve this issue. My taskbar is accessible, my right-click functionality works. The Just Plain Ol' Restart Method. I tried two restarts and even a shutdown-and-restart, but received the same message.
First Method :
1. Opened a command prompt and tried sfc / scannow and then chkdsk c: /f
2. Nothing wrong was found.
3. A restart after that yielded the same result.
Second Method : Some Youtube hunting brought me a dism method. Again from the command prompt:
1. dism /online /cleanup-image /scanhealth
2. dism /online /cleanup-image / restorehealth
3. sfc / scannow
Each task completed without error, yet a restart brought me the same resulting error.
Third Method : It was at this point I thought I was overcomplicating the issue, and attempted a system restore. I restored to yesterday's backup (apparently there was an update to Windows 10 overnight), and continue to receive the same error message.
I have another computer to use (from which I'm currently writing this), but the primary computer is the one without the Start menu functionality. It is vexing that aside from a lack of Start Menu everything seems fine. There's no detected viruses or malware.
If the issue is incompatible drivers (yesterday morning I updated my keyboard and mouse driver without incident), I think that will be my next method, perhaps uninstalling them may work.
I recently started getting this error in event viewer. There are a number of threads across the web about it, but none of them has presented the solution. The error is related to Runtimebroker.exe.
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
I have a problem with windows system image backup. My OEM windows 8.1 was installed on normal HDD with mbr partition config. so i bought an SDD make an image back up from my drive c. and then use windows DVD to recover(install) the image on new SDD.
Now after i upgrade to windows 10 i learned that i could change mbr to GPT and use EFi boot instead on using old legacy boot option. Now after doing all these without reinstalling windows(cause I cannot go back to win 8.1 anymore)
I decided to make a image back from windows 10 so i can restore to it in future. The problem is every time windows tries to make an image, when it start to make an image from EFI partition it ran into this error : (the specified backup disk cannot be found) 0x807800c5
A couple of days ago I made a system image backup (there were no error messages that it was unsuccessful), now I need to restore it, I boot Windows 10 DVD, point to a network location and start the restore, but after an hour or so, at the end it errors with "0x80070057: Parameter is incorrect". After that Windows boots to diagnostic mode but fails to repair anything. Diskpart shows that the partition which used to be C is RAW, I also have an impression that the order of partitions is different (C was 3rd, after restore it seems to be 1st).
I checked and I'm able to mount VHDX with C partition and access all files, chkdsk doesn't find any errors on it.
It's a UEFI computer with GPT installation. Is there some way to restore it with some 3rd party tool, or manually? What can I do?
PS: there's a lot of clues on the internet about fixing similar problem when such error popups at the beginning of restore from a USB thumb drive. The solution is to unplug the thumb before starting so the restore doesn't get confused with the additional drive. It's not the case here, I'm not using USB thumb and I get the error at the end of restore.
Update: I managed to restore an older backup of Windows 8.1 from before upgrade to Windows 10. I used Windows 8.1 DVD for the restore.
The difference between an old image and the new one is that after upgrade to Windows 10 I removed an optical drive and replaced it with a SSD which I was using for page file and ReadyBoost. Also, Windows 8.1 had 3 partitions, while after upgrade to Windows 10 I noticed that there's some additional 4th partition (so there were 2 restore or EFI partitions, not sure which), but the backup image of Windows 10 still consists of 3 VHDX files. The image of Windows 10 isn't an image made from a scratch - when I was setting up the backup I simply pointed to the old 8.1 image and Windows 10 was making its images on top of the old one (I wanted it to backup the differences only, to avoid huge transfer of the whole drive).
Anyway, as I already stated I'm sure that VHDX of Windows 10 isn't corrupted. It's probably some problem with XML metadata so the restore procedure can't recreate proper partition layout corresponding with images, or something. A
When I manually try and make a restore point using the windows program it ends with a property page error.
It still does the restore point ok and seems to work all right if I need to use that point to restore.
No error notifications pop up using the System Restore Point shortcut tool or when system does a restore point when adding new programs or drivers.
So my best guess is the error is showing up because this page is open
Does it on two machines running Home 10586.14
