Performance :: Event Viewer - Audit Failure 5061
Aug 4, 2015
I continue to get this event in the Event Log under Audit Failure. I never had in Windows 8.1 and it started after upgrading to 10.
Cryptographic operation.
Subject:
Security ID:SYSTEM
Account Name:xxxx
Account Domain:xxxx
Logon ID:0x3E7
Cryptographic Parameters:
Provider Name:Microsoft Software Key Storage Provider
Algorithm Name:RSA
Key Name:51a92691-66f1-280f-d0db-59fad4f73491
Key Type:User key.
Cryptographic Operation:
Operation:Open Key.
Return Code:0x80090016
View 5 Replies
Similar Messages:
Jan 3, 2016
I just got a Driver Power State Failure Bsod. Please find attached the dump files.
Event Viewer called up 'CtHdaSvc.exe' which is the SB Recon3D Service.
Checking Gigabyte for an update to the audio drivers.
No new driver on the Gigabyte site. Will reinstall.
View 2 Replies
Mar 5, 2016
I recently re-installed W10, and used Kari's tutorial to move the Users folder to a partition on another disk, using the sysprep routine.
This is a list of W10s Environment variables that apply to my account (MS/user/admin):
Those that relate to my account all seem to be pointing to the right location (H:Users).
However, until I turned off 'Sync my settings', the event viewer was littered with errors regarding ESENT--Extensible Storage (database) Engine, recorded multiple times per minute in an infinitely repetitive sequence: Events 494, 454, 488 & 413. The 494 event is the trigger:
SettingSyncHost (2876) {068B89D8-0F81-40D5-A335-0959E66CAECB}: Database recovery failed with error -1216 because it encountered references to a database, 'C:UsersomnesAppDataLocalMicrosoftWindowsSettingSyncmetastoremeta.edb', which is no longer present. The database was not brought to a Clean Shutdown state before it was removed (or possibly moved or renamed). The database engine will not permit recovery to complete for this instance until the missing database is re-instated. If the database is truly no longer available and no longer required, procedures for recovering from this error are available in the Microsoft Knowledge Base or by following the "more information" link at the bottom of this message.
Any way of directing the SettingSyncHost process to the right location? The drive/partition label (C:) should be H:, but otherwise the path is correct, and the db file (which is a hidden, system file) exists in that location.
It's not a problem for at present, as I don't have any devices that use that account, and have turned off 'Sync my settings' via Account settings; but it may be in the future, and may also be an issue for those who have moved the Users folder and have devices that give them that syncing feeling.
Incidentally, virtually all references in the MKB describe permissions rather than location problems, and the "more information" link in Event Viewer (Event Log Online Support) provides no information (Page Not Found).
View 2 Replies
Nov 30, 2015
I'm getting the following event viewer error every 15-30 minutes whenever a non-admin account is logged in.The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user XXYY SID (S-1-5-21-1462133472-353174448-3584519177-1002) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
I've tracked the AppID down to RuntimeBroker. I've found a few posts mentioning a similar error for this application under windows 8, and suggesting changing the security settings as described. When I try to do this though, all the settings for RuntimeBroker are disabled, and cannot be customised. I've tried launch the admin tool as administrator, but it's still locked down.
View 9 Replies
Jan 22, 2016
I fnd that I have the same error message appearing at about 10 second intervals (on one occasion over 21000 were logged). Details below:
Log Name: Application
Source: ESENT
Date: 22/01/2016 15:32:30
Event ID: 490
Task Category: (1)
Level: Error
[Code] .....
View 1 Replies
Jan 1, 2016
I recently started getting this error in event viewer. There are a number of threads across the web about it, but none of them has presented the solution. The error is related to Runtimebroker.exe.
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160}
and APPID
{9CA88EE3-ACB7-47C8-AFC4-AB702511C276}
to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
View 3 Replies
Feb 10, 2016
My PC is often waking from Hibernate or sleep mode and I'm struggling to work out why. Is there a way of finding out what the cause is in event viewer?
View 1 Replies
Aug 3, 2015
How can I construct a .bat file to clear entries in the event viewer.
View 2 Replies
Feb 10, 2016
For the past few weeks I've been seeing errors in the Event Viewer relating to the LockScreen. These only happen when waking the PC up from Sleep mode. The errors are:-
5973 Activation of application Microsoft.LockApp_cw5n1h2txyewy!WindowsDefaultLockScreen failed with error: The app didn't start in the required time. See the Microsoft-Windows-TWinUI/Operational log for additional information.
and
1002 The program LockApp.exe version 0.0.0.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.
Process ID: 133c
Start Time: 01d16111867ebe61
Termination Time: 4294967295
Application Path: C:WindowsSystemAppsMicrosoft.LockApp_cw5n1h2txyewyLockApp.exe
Report Id: e6af0181-cd07-11e5-9cad-6c626d3ed397
Faulting package full name: Microsoft.LockApp_10.0.10586.0_neutral__cw5n1h2txyewy
Faulting package-relative application ID: WindowsDefaultLockScreen
View 4 Replies
Nov 29, 2015
make the "Clear All Event Viewer Logs using a BAT file" self starting such as making it run automatically on a daily basis or show me what code I would need to add to it to do that for me. I would just love to clear out the 10016s and 7031s codes daily.
View 2 Replies
Jul 29, 2015
Just upgraded my Win 8.1 Pro 64-bit to Win 10, and Event Viewer shows literally hundreds of Errors and Warnings. My 8.1 was almost error-free. What gives? Can I re-do the upgrade and try again?
View 8 Replies
Sep 5, 2015
diagnose the kernel power event id 41 error I've been receiving. Upgraded to Win 10 on day 1 of launch 7/29 which the Event Viewer tells me was the date of my very first kernel power related crash.
I've updated most of my drivers by now and while the crashes are now less frequent, still occurring about once a day
View 6 Replies
Mar 8, 2016
I have an Windows 10 Pro. I want to know what caused this. Task manager and event viewer was not responding and some of the applications stop responding. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.
My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.
Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. It was related to windows/software or hardware?
View 3 Replies
Oct 20, 2015
Recently installed Office 2016 and it works fine, but i notice an Event Viewer error
SideBySide 35
Activation context generation failed for "C:Program Files (x86)Microsoft Office
ootOffice16lync.exe.Manifest".Error in manifest or policy file "C:Program Files (x86)Microsoft Office
ootOffice16UccApi.DLL" on line 1.
Component identity found in manifest does not match the identity of the component requested. Reference is UccApi,processorArchitecture="AMD64",type="win32",version="16.0.0.0". Definition is UccApi,processorArchitecture="x86",type="win32",version="16.0.0.0". Please use sxstrace.exe for detailed diagnosis.
View 1 Replies
Mar 31, 2016
I had fresh clean install of Windows 10 Pro in MBR scheme . I want to know what caused this.Task manager and event viewer was not responding and some of the applications was not responding too. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. Thx. It was related to windows/software or hardware?I made topic because some peoples told me that corrupt data , can be caused by faulty memory(( What is yours opinions? But like i said i test memtest86, Windows Diagnostics Memory and hdtune showing no errors. Maybe try GoldMemory or that will be waste of time?
View 14 Replies
Aug 23, 2015
I have an SP3 running Windows 10. Finding this continuous error in the event viewer?
DistributedCOM
Event ID 10010
The server {7006698D-2974-4091-A424-85DD0B909E23} did not register with DCOM within the required timeout.
I looked up the ID in the registry and came up with a REG_SZ, REG_DWORD, and REG_BINARY. One of the descriptions said "Out of proc server to enable Insider Hub and Feedback App scenarios to be reached from inside of its appcontainer".
View 1 Replies
Dec 17, 2015
I installed an application in audit mode, and then sysprep.exe to OOBE. After this , i can find the applications, but desktop shortcut and startup menu disappear.How can i prevent these ?
View 1 Replies
Dec 2, 2015
After spending two days to get my computer reprogram after a Diskpart failure I want to do a backup on the drive. Is the Windows10 backup good to use,or do I need something else. If I do a complete backup can I restore it to another formatted drive ?.
View 9 Replies
Aug 6, 2015
The only constant errors I get when I reboot are these four, that all share the same ID of 7031.
The Contact Data_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
The Sync Host_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
The User Data Access_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
The User Data Storage_Session2 service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 10000 milliseconds: Restart the service.
Is there anyway to fix these, or better just leaving them be?
View 9 Replies
Nov 24, 2015
How to track services via eventlog name in cmd.so the main problem is I can't seem to find these services on services.msc ... I want to know how to track these services via cmd, how I don't want you guys to tell me what type of service is this i want too know how I can track this own my own?
View 9 Replies
Aug 18, 2015
I open calendar and click on the "+ New Event" button on the top left and... nothing happens. In fact, I can't do anything other than move the view around. What on earth am I doing wrong?
View 4 Replies
Oct 13, 2015
I've had Windows 10 since August, and for the most part, things have been going relatively okay. My only real glaring problem with the OS is that I can no longer here a sound during a system event. By that I mean the usual sounds like when you're clicking through the Explorer, emptying the recycle bin, a dialog pop-up and such.
My system is a Dell Inspiron N4100 that was previously running Win7 Home Premium, and now I'm running Win10 Home Edition. The sound in general works fine; like media players, games, and through the Internet browsers. It's only the system sounds that refuse to play.
View 1 Replies
Nov 26, 2015
It seems that whenever the Windows Store became available I've always gotten Event ID's 69 similar to the one below. The app changes. It usually happens about 15 minutes I first cold boot my machine. Sometimes after installing a Store app.
Failed with 0x490 modifying AppModel Runtime status for package Microsoft.WindowsCalculator_10.1511.60020.0_x64__8wekyb3d8bbwe for user DESKTOP-JJKSIHMgarys (current status = 0x0, desired status = 0x20).
It has occurred on Windows 8.x and Windows 10. On different machines too. Even with a clean install. It never seems to affect the application mentioned. I assume it's part of the Store updating procedure.
What exactly this error means? Seems to be another permissions problem which Windows has always had since 8.x.
View 9 Replies
Sep 24, 2015
I need to get the attached application to run. it has suddenly stopped interacting with windows. attached is the screenshot. the application is kernel.exe.
View 6 Replies
Aug 23, 2015
I had my win 10 installed for about 2 weeks , but there's some problem about randomly freeze at some interval , so i checked event viewer and got event id 153 which is say about "The IO operation at logical block address 0x204d96b8 for Disk 0 (PDO name: DeviceIdeIAAStorageDevice-1) was retried" what it is ?coz I dont really know about I/O operation at windows .
View 3 Replies
Nov 1, 2015
Having some internet issues where connection is lost for 3-4 minutes and the cable modem restarts. The event viewer is filled with the logs below usually before the internet disconnects. I'm wondering if this is the cable modem's fault and Windows just reporting what's happening, or if the computer itself is causing the cable modem to restart.
Code:
Fault bucket , type 0Event Name: WPNConnectionFailureResponse: Not available
Cab Id: 0Problem signature:P1: Data Fast-Reconnect
P2: 8004acb1P3: WNPP4: UnknownP5: UnknownP6: UnknownP7: 1P8: 242P9: P10:
[Code] ....
View 1 Replies
