Performance :: Extremely High Intermittent Disk Usage
Dec 13, 2015
From sometime in October, after an update, there have been periods, sometimes intermittent, sometime persisting for a long time, when Disk usage spikes up to 100%, and makes a lot of things unusable.
I did some researching, and disabled a bunch of stuff, like Windows notifications, Windows search, background intelligent transfer and superfetch, even OneDrive, but even on Windows 10 version 1511, Disk usage spikes to 100%, the offending application / service being anything from System to memory compression to 3rd party applications...
This is becoming extremely irritating, and my video playback or something else stutters a lot when disk usage jumps up, often at chronic levels, then backs down, or stays at that usage for some time.
View 2 Replies
Similar Messages:
Sep 26, 2015
So up until this morning my Windows 10 desktop has been performing really well. When the machine is idle the CPU use is only in the 1-3% range.
For some reason my idle CPU use is now CONSTANTLY 30-40% (even after a reboot)! Task manager says its "Service Host: Local System (15)". If I expand this process in task manager it lists:
Why is this happening all of a sudden? I have all Windows Updates installed and I run an i7-3770 CPU.
My machine is now slow/sluggish with 30-40% being hogged by these services!
I don't have any Malware installed as I run Malwarebytes Premium and the scan comes back clean. Some goes for a full anti virus scan.
View 9 Replies
Feb 10, 2016
I'm getting a constant high disk usage without even having anything running. Here's a screenshot of my problem
And well, so far I've tried the ''deactivate 'windows search' and 'superfetch''' and it hasn't really done the trick.
Also I resetted my pc yesterday, as of now I'm running a clean install of Windows 10.
Did the ''turn off notifications from Windows'' and really nothing, I've also defrag quite some times with Defraggler and DiskDefrag and nothing.
View 4 Replies
Nov 15, 2015
I just upgraded to TH2 from Win 10 Pro. I noticed that my disk usage is near 99% for the past 20 mins. It keeps fluctuatiing between 10 to 99. Normally my disk usage stays at 0. May be this might be Windows settling in after the upgrade? There was high disk usage the first time around when i upgraded from Win7.
View 3 Replies
Aug 2, 2015
I just installed win 10 last day, and it was going fine, no conflicts on the drivers whatsoever. But after a day, when I booted up, it seems to have slowed down to a point that everything does not respond to my inputs, though it does after a couple of minutes, i check the task manager and it shows that the disk usage is high, the r/w speed show high utilization about 10-40mbps and the active time is 100%? I have read some thread and suggested to turn off superfetch and prefetch but that didn't do a thing to me. Btw, I installed it over win 8.1 using a bootable usb.
View 5 Replies
Dec 18, 2015
For some reason iexplore.exe consumes extremely high cpu resources. Only IE and only cpu. I have done a myriad of scans:
Roguekiller
TDSSKiller
ESET
Malwarebytes
Bitdefender
and none indicate a Trojan or rootkit. I have also deactivated most extensions and followed dozens of articles on the net. I know I am supposed to use Edge, but it lacks features that I want and has other limitations that make it cumbersome. Likewise Chrome and other browsers react differently for many of the sites I use.
View 6 Replies
Feb 5, 2016
I'm currently on a PC with a 250GB SSD (Samsung EVO850 M.2). Recently my PC suddenly was out of storage and I wondered why, since I though I still had at least half of the storage free.
So I decided to run WinDirStat to figure out which directories were taking up all the space. As you can see in the screenshot it shows completely different values for the used space by the C drive. For your info, I only have a C drive, no second disk or second partition.
View 9 Replies
Aug 12, 2015
I recently bought a new laptop which had Windows 8.1. After a week of having it I noticed my Disk Space near 100%. I heard this was a common problem so installed CCleaner and did disk space cleaner however none of it worked.
I then upgraded to Windows 10 as a friend said this solved the problem for him, however, since doing so either the disk space, Memory or CPU are high either one at a time or all together, regardless of what I am doing on the laptop.
The first week of having the laptop I don't believe this was a problem so I think it's something to do with an update as all games ran smoothly.
When I run a game or bring up firefox near the top is always 'system (ntoskrnl)' or a few 'service host (svchost)'. I dont believe its the games I play or firefox as like I said it was fine for the first week. It seems windows are running stuff behind the scenes.
I have done a few things that I have found on the internet but none have worked like; disable prefact and superfetch or whatever they are called. Still seeing increase in memory or disk usage whenever i load something and system or serice host are there at the top of performance or the game seems to use alot - however again the game never did this in the first week.
View 1 Replies
Aug 10, 2015
So I've tried multiple different installations of windows 10 on my hp envy 17 (no slug of a machine, i5-12gb ram etc) Stretching back to the previews. I'm also running windows 7 on the laptop in a dual boot situation. The disk has a built in HP recovery partition from the original windows 8 that came with it. I had split the HDD and started dual booting windows 7 as my main OS, but left the other Win 8 OS alone.
When I went to install windows 10 to a new partition from the start, the system became almost unusable. Hanging every few seconds, sometimes taking 1-2 minutes just to write a short series of words as each key press would take ages to register or the mouse wouldn't move. All the troubleshooting showed no particular reason. The only odd standout would be that the disc usage would keep spiking to 99-100% every time, and almost each one of those times it happened as I watched in the task manager/performance manager, i'd be seeing an item at the top usage showing fraction of the normal top write/read speed, something like 1.5mb/s....even with that low a transfer rate, it just kept reporting the disc was at 100% usage while it proceeded to freeze for the next 10 seconds-1 min+.
So I tried re-installing using different methods, different builds, tweaking the paging file and fastboot settings as recommended. Eventually, I figured maybe I'd have more luck booting up the existing windows 8 partition and doing the "get windows 10" upgrade root over the dvd/usb upgrades and clean installs route I had tried. No luck. Marginally better. I've already tried getting proper drivers/upgrades. I've tweaked settings and tested the disc in multiple ways. No errors or issues. If I restarted an install, I never just reinstalled over top, it was wiped to rule out cross contamination. One thing I haven't covered yet is this.
During the installs, I originally had issues with being told I couldn't install to "this gpt partition" That would be fixed by using rufus to make the bootable usb with the file structure. When I try these installs/win 10 logins, it's been either as regular uefi boot mode OR legacy mode (windows 7 support) So i've ruled out the boot mode as a source...I think. A few times I received a message about the partitions not being in the optimal/preffered order by the windows 10 installer. After having read about the issue at the directed ms link, it sounds like it could be an issue. I include the following screen shot of the partition manager, as I don't want to mess with the wrong partitions. Windows 10 is C drive in this case. The partitions before are either recovery or boot partitions. For what system/os
View 9 Replies
Jul 29, 2015
I was having long boot time issues with windows 7. It was taking more than 5-6 mins for my pc to become responsive on desktop. Then I upgraded windows 10 today , issue still persisted. After that , I tried clean installing the 10.
I still have issues which are :
1)After Windows logo I have a black screen for a couple of minutes then logon screen comes. ( Last reboot : 1.5 mins )
2)After logon , my formatted pc takes some time to became responsive due the system and svchost processes using hdd %100.
(2mins after logon , usage goes down and pc is responsive)
I checked my HDD and it was fine when using win 7.
View 2 Replies
Dec 6, 2015
I just recently installed Windows 10 on my Dell Inspiron Laptop and so far I am not impressed at all - in fact, I am very seriously debating one of two actions - re-install Windows 7 or switching to an entirely different OS.
The reason for reverting to Windows 7/switching OS are as follows:
1) Currently with an idle system (i.e. no applications running at all), an svchost process is using anywhere from 40 to 60% of my cpu. When I did a tasklist on this process the following processes are attached to this one pid: Appinfo, BITS, Browser, DsmSVC, IKEEXT, iphlpsvc, LanmanServer, lfsvc, ProfSvc, Schedule, SENS, ShellHWDetction, Themes, UserMananger, Winmgmt, wuauserv. My question is this - is it necessary for these processes to be run. If they are, then am I looking at only being able to use 50% of my processor (since this one pid is using the rest of it)?
2) For a virus scanner - I am using McAffee and under Windows 7, it took my laptop 24 hours to scan 231 GB of data. Since I switched to Windows 10 (Same hardware, same memory, etc) it now takes my virus scanner over 48 hours to scan 231 GB of data.
3) If I had not been poking around and trying to change my update settings, I would never have found out that Microsoft expects their users to update the windows of the other users (Microsoft calls it Dynamic Updates). Now this is all well and good if some one had said something since I would have loved to know about it sooner since I am on a metered service.
4) Some of the programs that comes with Windows 10, I have no use for but yet I can not un-install them (Cortana come to mind).
5) It appears that even though I have turned off "Live tiles" the tile continue to update from the net (again - it would have been nice to know since I am on a metered service).
The only option that I know of is to revert back to Windows 7 or switch to a new OS.
View 4 Replies
Dec 23, 2015
Basically I noticed that my PC has a lot of RAM used but no program is using the RAM - see attached screenshots. Obviously it doesnt really affect me until I launch a game: eg GTA 5 which before ran happily at 60 and is now stuck on less than 1 FPS when I get into the game (even after spending like 20 minutes in lag hell to try to reduce all the settings to the lowest).
However Rainbow Six Siege runs at 120 FPS with no issues, so GTA may be an isolated incident.
(Also important to note I only have 8Gb of RAM, even though it says */16.0GB for the committed memory)
Specs are:
Computer type:
PC/DesktopOS:Windows 10CPU:Intel Core i5 3570k Motherboard:ASUSTek P8H61-M LE/USB3 Memory:8Gb(2x Corsair 4Gb 1600mhz Vengeance) DDR3 CMZ8GX3M2A1600C9 Graphics Card(s):NVIDIA GeForce GTX970 Sound Card:Onboard 7.1 Audio (Realtek)Hard Drives:1Tb ST1000DM003-9YN162 ATA Device
1Tb Hitachi HDE721010SLA330 ATA DevicePSU:XFX PRO850WCase:Zalman Z11Cooling:Corsair H60 Water Cooler
View 4 Replies
Apr 14, 2016
I have recently noticed a bit of a performance issue on my HP laptop running Windows 10 Home.
What happens is, if I am not doing anything on the laptop, but am not putting it to sleep (i.e. idling), it stays at a low CPU usage. However, after a while (usually about a minute?), the CPU usage rockets up, and also affects my CPU temperatures (goes up from ~35'C to ~50'C).
The processes that are the culprit, as defined by the detailed tab of Task manager, are either "svchost.exe" or "System" - the latter is described as "NT Kernel and System" and is linked to ntoskrnl.exe.
The laptop came preinstalled with Windows 10 and doesn't have many programs installed.
View 9 Replies
Feb 10, 2016
After installing Windows 10, I have consistently been getting high memory and cpu usage by both the System and Service Host: Local System processes. Usually the usage keeps rising from 1GB to sometimes 8GB. I left my comp on while I was at the gym today and came home to it prompting me with a low memory available message. This must have shut down some processes because now my pc is running at 13% memory and 2% cpu. I have searched for this issue and found similar threads, but none of the solution work for me.
View 1 Replies
Jan 25, 2016
Here is my laptop specification:
- HP Pavilion g4
- Intel Core i3 2.2 GHz
- Radeon 6470m (but somehow got 7400 driver and worked) plus Intel HD 3000
- Windows 10 of course
- 2 gigs ram
- And latest drivers, checked with Uniblue's driverscanner and link on other subforum stickies.
It's high memory usage of this process, it starts with ~7mb then grows up to ~200mb on heavy use. This happen with recently windows 10 update.
What I have done is, I do a restart every time I made these changes:
- SFC /scannow
- Update driver (again)
- Turn windows 10 tips off
- Try disable Superfetch
- Malwarebytes scan
- Disabling High Definition Audio driver drops the process usage to normal 28kb, but this somehow rise again to ~100mb.
View 3 Replies
Feb 10, 2016
In W10 when I leave my laptop in sleep mode overnight, it uses about 10% of battery life. In windows 7 it was way less, to the point that it wasn't even noticeable.
where I should start looking?
I have a Thinkpad X220T
View 3 Replies
Feb 23, 2016
For a while I 'm having problems with locking while I surf the internet after five minutes browsing the facebook the browser begins to catch and is impossible to do anything , I noticed that this occurs when the system and compressed memory reaches 15% use the CPU when closing facebook use immediately falls to less than 1 % and the browser back to normal. I never had it before and started to happen with these recent updates.
before:
after:
View 6 Replies
Jan 9, 2016
When I am downloading something with utorrent the memory usage in task manager slowly creeps to 100% and makes my computer unusable and even if I shut down utorrent the memory usage does not change and I have to restart my PC. Same goes for browsing facebook or any other sites. Is there a solution to this? I really don't want to reinstall my system.
View 9 Replies
Jul 4, 2015
I installed Windows 10 (10130 build) and I love it. The only problem that I'm having with it is this Photo Background app that eats my cpu(30-40%)! When I start up windows I need to kill it in task manager everytime. But even after I kill it if I leave my laptop in idle it still comes back. I want to understand what this Photos Background Task Host is doing, his functionality...
View 6 Replies
Aug 31, 2015
from some reason, a process called "Windows Image Acquisition (WIA), which I've never seen before is running and using about 30% CPU. I read in MSDN that "Windows Image Acquisition (WIA) is the still image acquisition platform in the Windows family of operating systems starting with Windows Millennium Edition (Windows Me) and Windows XP."
Does that mean that from some reason my laptop's camera is running now? Maybe my laptop was hacked?
View 4 Replies
Jan 12, 2016
Since upgrading from windows 7 to 10 my pc has been slowed down to a crawl by periods of very high cpu usage. A major culprit, but not the only one, is local security authority process.
This makes the laptop overheat , reduces battery life and slows work to a crawl. I have run sfcscannow and dism as administrator and no fault has been found..
View 4 Replies
Nov 11, 2015
From the moment I switch ON my desktop until switching OFF (working for 12 hours) the local system service host is always between 30% to 40% regarding CPU usage.Why? How to stop it?
This does not happen in my Microsoft Surface Pro machine. Both machines, desktop and Surface have the same software installed so it's hard to believe this CPU usage is software based.
View 5 Replies
Oct 29, 2015
I am running Windows 10 Pro. Over the last couple of days, for some reason, the OS reports 100% disk usage, even when no application is apparently running. It was quite alright a few days ago, but troublesome over the past 2 days. I had assumed it was running some background task, and would become normal, but the abnormally high disk usage persists even after the machine has been running for half an hour.
In this period, no Windows updates were installed, and only a scheduled checkpoint was created 4 days ago. If I try and restore to the checkpoint during boot, I get an error, saying the PC needs to be repaired. If I try it from the recovery option in Windows 10, it does not shut down for a restart, just keeps on the blank screen saying "Initializing restore". The entire time, according to the indication light, the disk seems busy.
I tried disabling superfetch and background intelligent transfer service, but did not work. The spike in disk usage is not specific to anything, sometimes it is the system, other times the malware service...
I do not wish to reset the laptop, as I had quite a few things installed, but I do not have the installation media for those anymore, and so would not be able to install them again after the reset.I have the installation iso for Windows 10. The laptop is Dell 17R SE 7720. I had upgraded to Windows 10 Pro almost 2 months ago, and it had been running fine.
View 1 Replies
Dec 28, 2015
I need diagnosing why my system disk is running at 100% without anything actually running.
My Anti Virus is not doing anything, windows update is not doing anything, and my disk is not defraging.
I would have never noticed this happening if it wasn't for long load times and reduced FPS in anything 3D. My mouse and keyboard even are lagging and hanging.
My system disk is at 100% and a constant write speed of 1-2 MB/s and a constant read speed of about 200KB/s.
How to diagnose what is using my disk 100% of the time?
View 7 Replies
Nov 27, 2015
Since I upgraded to Windows 10 from Windows 8.1 (who knows when, within the week of first release) I've had a plethora of issues, and recently I found the source of the problem. My computer spikes to 100% disk usage randomly, even with nothing open and will suspend all applications on the computer. A couple of random things can set it off (sometimes when I open the "Search the web and Windows", open an application, Ctrl+Alt+Del, and ALWAYS when I boot my computer)
I've tried every. single. thing. that I have seen on the internet including but not limited to: superfetch, registry stuff, Unistack thing in task manager, Windows defender, uninstalling programs, defragmenting my 1TB Western Digital HDD even though it says 0% fragmented, cleaning up my HDD, checking if my HDD died which it hasn't, and updating my drivers, stopping all startup programs, disabling unused Windows apps, though nothing has seemed to fix the problem permanently. I also used to get this "Display driver AMD has stopped responding but has recovered" though I edited something in the registry and it doesn't show this anymore but I still experience the same problem. I'm quite fed up with this, and I'm thinking about buying Windows 7 in an attempt to downgrade.
View 3 Replies
Nov 29, 2015
I'm not sure what type of issue this is so I've posted this in the Performance & Maintenance, Gaming and Hardware categories.
Anyway here's the thread: 100% Disk Usage when running GW2 - Windows 10 Forums
View 2 Replies
