Performance :: Move Recovery Drive To Separate Partition?
Mar 5, 2016
I created the USB recovery drive successfully with the option "Back up system files to the recovery drive".
Since I needed the USB for another purpose, I transferred the files from the USB to a separate partition on an external HDD and made this drive bootable using YUMI.
So now, on the same laptop, I am able to boot to this new partition on my external HDD where windows recovery environment comes up just fine. I did not want to test the reset or refresh part. Out of curiosity, I clicked on the "System Restore" option on the advanced options screen. I got an error message "To use system restore, you must specify which Windows installation to restore. Restart this computer, select an operating system and then select System Restore"
View 2 Replies
Similar Messages:
Dec 5, 2015
Just installed a new M.2 SSD into an MSI GE72 laptop running Windows 10. First used MSI's Burn Recovery tool to copy the recovery to a USB flash drive. Restored onto the SSD and wiped the HDD. The resulting partitions on the SSD are shown in the attached image. So I end up with 6 partitions:
1 - EFI Recovery
2 - Hidden Windows partition
3 - C: or first usable partition
4 - 900 MB Recovery partition
5 - D: or second usable partition
6 - MSI's OS recovery image partition
The issue I'm having is that I'd like to collapse partitions 3 and 5 into one large partition for the C: drive. I am unable to do this because of the 900 MB recovery partition between them. Disk Management does not give me any options for this partition. Since I plan on dual booting with Linux installed on a second partition on the HDD, I assume I can use GParted to move the recovery partition to partition 5. I also assume that by doing this, I'll break the recovery function as WinRE is still pointing to partition 4. Also, since I'll then collapse the two usable partitions into one, the partition numbers of that 900 MB partition and the MSI OS recovery partition will change. I'm guessing that there is a way to update the settings but I've run across different forum threads that say the OEM recoveries are custom set up by them. So any generic Windows 10 guides I find may not be applicable.
Of course, I have no basis for a lot of these assumptions as this is my first foray into a Windows OS after Windows 7. Also my first time owning a machine with UEFI, which seems to be fighting against me installing Linux.
I don't understand why MSI would decide to split the large usable partition into two? Even more confused as to why they decided it was a great idea to create an untouchable 900 MB recovery partition in between them?
Maybe also try to convince me how UEFI and Windows 10 is so much better than Windows 7 with a custom recovery in a less than 5 GB custom made recovery partition?
View 4 Replies
Jun 29, 2015
Wondering how Windows 10 deals with putting data on a separate partition or drive. Does it use the same general method as in Windows 7, where it re-maps (for example) "Documents" to a folder on a different letter drive path? So that C:Users{user}Documents becomes G:Users{user}Documents?
I'm hoping that it actually becomes more like *nix, using symbolic links to point to the right place (so C:Users{user}Documents points to the separate partition of drive). Personally, I find the Win7 method to be clunky and problematic in actual use.
View 1 Replies
Mar 26, 2016
I have a Sandisk Cruzer 64GB USB 2.0 thumb drive and I was wondering if it's possible to create 2 disk partitions and install some boot menu to allow me to choose either the Win10 ISO partition or Surface Book Recovery Image when I boot to USB in UEFI?
View 9 Replies
Oct 27, 2015
I have tried several times to create a system recovery drive on a USB.
Followed the instructions to the letter, and used two different brand, brand new USB's.
After initial start up it says I need a USB with at least 8 GB capacity, which these USB's have. But nothing happens, it just keeps asking for a USB after one has been inserted.
View 4 Replies
Dec 23, 2015
I have recently updated to Version 1511 and thought I would try to create a recovery drive on a USB having been unsuccessful when trying in the earlier Windows 10. This time it seemed to be working with the system files box checked, though it seemed to take an age before the USB was required to be inserted. It said I would require a USB of 8GB minimum capacity so I used a 16GB size.
When it finished creating the drive ( I did not see the actual finish but no messages were left on screen) I noticed that the USB had only a little over 1 GB of information loaded.
I would probably find it useful if I could be told what files I should expect to find on the USB and the size of each. The files in my USB are titled: boot; efi; sources; bootmgr; bootmgr.efi and reagent. The sources file ( 1GB) is by far the largest.
View 9 Replies
Nov 19, 2015
I'm running Win 10 Version 1211 (build 10586.11) - i.e. the latest build with the latest update.
I want to create a new recovery drive but when I get to the window that says "Connect a USB Flash Drive" and the process comes to a dead stop.
-I'm using the same 16GB thumb drive that was previously used to create a Win 8.1 recovery drive so it should be good
-The thumb drive appears in File Explorer and I can read and write to the drive so the system sees it
I should also mention...
-I have attempted this with and without "include system files" checked.
-I find it interesting that after a thumb drive is inserted, I don't have the icon in my system tray that I would normally select to eject the thumb drive.
Nonetheless, I can read and write to the thumb drive. I've inserted the same thumb drives in another computer with Win 10 build 10240 and I get the USB eject icon on my system tray
View 9 Replies
Oct 13, 2015
I have upgraded a Win 7 and a Win 8 computers to Win 10. On the Win 7 I used an 8 GB USB Drive for Recovery and it did not use all of the space. On the Win 8 computer I'm getting a message that I need a 32 GB drive. I understand that it may also be backing up my Win 8 information, but 32 GB seems way too much. I hate to waste money on a drive that is not needed.
View 6 Replies
Oct 18, 2015
One of the 1st things I do with a new PC is create & test a recovery drive. This is the 3rd Windows 10 PC I've worked on-all Toshiba Satellites by coincidence. This one seems to have a problem, possibly creating the recovery drive and if not that then certainly using it. Or else I've forgotten how I used it on the other two. I test it by doing a restore from system image-since I create it immediately after completing setup I haven't lost anything and this assures me that if nothing else I can get back to 'ground zero'.
This is the 3rd time I've tried this on the new PC. The first time it said it was unable to create the recovery drive. I checked the USB stick & tried again. That time is 'successfully' created the drive. Both times 'copy system image to recovery drive' was checked. When I tested the 'successfully' created drive it couldn't find a system image on it.
So I'm trying it again and it's just sitting on the 'Please Wait' screen-for 20 minutes so far. Presumably it's erasing the drive so I'm reluctant to simply reboot. And this is the last 16GB USB stick I have. Should I shut it down & try again, get another USB stick, or what? Or have I totally forgotten what I did on the previous 2 PC's that worked?
View 3 Replies
Oct 31, 2015
I did once manage to Partition in to 2 separate drives the Disk 2 - New Volume (G:) external drive
However I can not repeat that and instead I keep getting it split in to 3 partitions?
I only want 2 partitions 1 x 1TB + 1 x 2 TB
I am doing this on this system (Windows 10, 32 bit) Home edition, because my ACRONIS Total Image 2016 won't recognise a 3 TB drive.
BTW: I have two other registered Windows systems 1. Windows 10 Prof. & 2. Windows 7 Prof. both using 64 bit, that I don't have problems with.
Please see attched .jpeg image
View 9 Replies
Feb 10, 2016
Windows10 Recovery USB Media/Drive - Control Panel ( Backup & Restore )
I have upgraded to Windows 10 from Widows 8.1 (pre-installed) , on my "ACER Aspire E1 472P- 6491" laptop by taking advantage of the free upgrade offer and successfully activated Windows 10 . I do not have a Windows (8.1 or 10) product key , as the Windows was pre-loaded on the laptop .
Now I want to make a " Windows10 Recovery Drive ", which can be used later to boot/re-instal Windows10 in case my Laptop fails to boot or to reset/troubleshoot any problems on Windows10 . Accordingly I tried to Create Factory Default Backup via Control Panel ( Backup & Restore ) option, but I found that it is meant for Windows 7 or 8.1 only ( which means that the system can be recovered back to Windows 7 or 8.1 only - not Windows 10 ) .
Why Backup & Restore is meant for Windows 7 only , when I have upgraded to Windows 10 already . In fact I have upgraded to Windows 10 from Widows 8.1 ( not Windows 7 ), then why it is taking me back to Windows 7 ? Can I not create a Recovery USB Media/Drive Backup for Windows10 for future use , after I have upgraded to Windows 10 ? If not , then how to make a Windows10 Recovery USB Media/Drive .
a) After upgradation to Windows 10 , why Control Panel ( Backup & Restore ) option is meant for Windows 7 ( or 8.1 ) recovery .
b) How to create Windows10 Recovery USB Media/Drive Backup that will work to boot/re-instal Windows10 in case my Laptop fails to boot in future .
View 8 Replies
Jul 31, 2015
What I'm planning to do is upgrade my rig with an SSD, but I don't really want to lose my files. Is there a way to refresh Windows, and have the "refreshed" install and my files on a separate drive than what Windows was originally installed on?
View 2 Replies
Jul 9, 2015
I'm trying to access my user folder on a different hard drive, but it takes forever to load and then afterwards does nothing. I think I've already set all the permissions and stuff but it still isn't working.
View 10 Replies
Aug 1, 2015
I am trying to make space on an empty partition as a temp backup before I install a fresh copy of 8.1 to upgrade to 10.
I'm using Mini Tools Partition Wizard 9 Free Edition. What I have looking at the partitions are, a C partition (700 gigs capacity), then a System Reserved partition (350 mb's) then a F drive with 100 gigs of unallocated space. Here is an illustration.
Disk 1 - { [700 gig C] [System Reserved] [100 gig F] }
I want to shrink my C drive by 100 gigs and then resize my 100 gig F partition so I will have 200 gigs of usable space for the backup - But I can't because somehow my System Reserved Partition is on the right side of the C partition between the C and the F. Normally this system reserved partition is on the left of the C partition.
I do not know how this partition got moved. I did have another partition set up after the C drive that I used to install the Win 10 preview on but I since have deleted that partition and edited the boot menu to reflect this in MsConfig. Perhaps Win 10 moved my System Reserved partition over?
View 7 Replies
Jan 26, 2016
So I recently formatted my Windows 8.1 system and installed Windows 10. But it seems that the setup decided to set my System parition to a separate HDD (G: ) and put the bootmgr and all the boot files there, instead of using the left-over 350MB System Reserved partition on my primary SSD that Windows 8.1 had used. So of course now if I removed that disk, I wouldn't be able to boot anymore.
So what'll be the best way to move all of the boot files and system partition setting back to my old 350MB System Reserved partition? Will I need to disconnect all the other drives and do a repair install of Windows 10? Or can I manually move the files and partition settings over? The old partition is still marked as Active, so maybe I can just move all the Boot related files from G: to the 350MB partition and it'll just work? Maybe mark G: as INACTIVE too
View 4 Replies
Aug 16, 2015
I am loving Windows 10 and I want to remove Windows XP from my dual-boot configuration (and remove the whole dual-boot thing completely) but it also acts as the system partition, so I guess it's not as straight-forward as I had hoped. Is there a way to make my Windows 10 partition the system partition?
View 1 Replies
Mar 5, 2016
My Vaio laptop came with a built-in recovery partition (it's 'bout 32GB and hidden). Sometimes I use it to reset my PC back to factory conditions due to unexpected errors. But yesterday I was shocked 'cuz Windows Disk Management showed that my recovery partition was empty! When I checked with different third-party apps they showed the partition had 'bout 27GB in use. In fact I couldn't boot into Vaio recovery mode anymore.
View 1 Replies
Nov 24, 2015
After the update to version 1511 build 10586 Windows has created a 450 Mb recovery partition on my SSD drive.
I have already deleted the created Windows_OLD folder as well as the hidden folder with update files.
Can I seamlessly and without risk also delete the recovery partition?
View 9 Replies
Sep 7, 2015
I have an HP laptop that shipped with Windows 8.1. I upgraded to Windows 10 weeks ago and tonight I accidentally reformatted my D: drive recovery partition.
I have recovery media on a USB pen drive that I made back when I first set up my computer.
Has Windows 10 changed the D: recovery partition during the upgrade or will it be the exact same image the computer shipped with?
how I can get the recovery files back on the D: partition?
View 8 Replies
Dec 3, 2015
I have a disk (HP machine) which has a recovery partition on it. When I go into Admin tools/Virtual disk manager, I can see the drive there (a partition on the real disk) but I can't delete it.
View 6 Replies
Dec 13, 2015
i recently upgraded my hard drive to a new samsung 850 pro ssd 512 gb . i used the samsung migration software and it all went smooth , i checked the newly installed ssd in disk management and it shows that it copied all three partitions which are, 500mb healthy ( recovery partition) .........260mb healthy (EFI system partition) and windows (c 476.18gb NTFS healthy (boot,page file, crash Dump, primary partition) .
Everything seemed to be working fine until tonight when i had a ethernet problem which turned out to be one of my ports on my router going bad . but before i realised that all i needed to do was try a different port on my router i tried resetting my pc to factory settings but it would not let me do it with the new ssd drive so i then tried making a recovery usb flash drive but windows said it could not do it because files were missing .
So even though it shows that i have a recovery partition in computer management i cannot use it . i have not got a clue on how to fix this problem with the new ssd . i swapped the old hard drive back in to the pc and tried to make a system recovery usb drive and it worked fine so why cant i do this from the new ssd and why would files be missing from the newly cloned disk ?
i7 6700k
asrock z170 pro4s motherboard
32gb ram
gtx 980 TI
wd blue 3tb drive for storing music and games
samsung 512gb evo pro ssd boot drive
windows 10 operating system
View 6 Replies
Aug 13, 2015
In a fit of over zealous tidying up after installing Win 10 on my lappie, I deleted the 450MB Recovery Partition that the upgrade from Windows 7 created at the end of the main partition.
1) What was actually in that partition and why would I want it.
2) If I do want it, how to re-create it ...?
View 6 Replies
Nov 28, 2015
How can I get back my Recovery D. or Recovery partition? It was accidentally remove on my laptop. How to get it back without recovery media on my laptop and I didn't save it to any disc or flash drive.. ..
View 7 Replies
Aug 14, 2015
Recovery Partition...
The thread above reminded me...
My laptop has a partition with Windows 7 on it for recovery purposes. It was a long time ago, but I think I created it from an ISO. I can't even remember how it should be used!
View 3 Replies
Sep 17, 2015
SP3 has been acting a bit funny lately and went to restore and it says the recover partition is missing. I am pretty sure I never deleted it.
View 3 Replies
Aug 13, 2015
Pretty much exactly what the title says. After upgrading from win7 => win10 I migrated over to an Samsung 840EVO ssd with 500gb capacity and before I knew it, the capacity was almost already full. I scaled back some of my media storage to an external HD but I still want to minimize this partition.
Basically, why is this partition so big? Surely a recovery sector doesn't need to be that big... and secondly how to scale this back if its even possible (preferably without having to wipe the drive and re-formatting/partitioning it) Its currently ~100% free.
View 9 Replies
