My PC is fully clean, defragmented and it has no viruses, but my PC boots up very slow... So I went to check whats making the boot so slow and I've seen that windows audio needs 77 seconds to boot up.
View 2 RepliesSo this computer is very slow and It probably has viruses. Windows starts up and cmd.exe starts up. This computer should be running faster than it is right now. I have a 32bit computer windows 7 and it runs faster than this.
View 6 RepliesI'm using an Intel SSD 240GB 520 series. Always loading very fast, i.e., about 8 seconds from cold boot.
Since windows 10 is installed, boot time is about 20 seconds and desktop icons take some time to refresh and load their images.
Regarding the boot time: I've narrowed it down the an unexplained read/write access on my external HDD eSATA which is used for backups, though currently all backup process are stopped.
When I remove / turn off my external HDD, boot time is about 8 seconds. I can't figure out why all of a sudden it required this access to this HDD.
As for the slow icon refresh.. how to fix this.
I upgraded my preview build of Windows 10 (10130) to the pro final version because the preview wasn't able to find additional builds and kept crapping out on standard updates. All went smoothly, but the first thing I noticed is that the next time I booted cold, Windows 10 would get past the "starting windows" screen and play the startup sound.
However, the logon interface never appeared, or the cursor. All that was displayed was a solid black screen. I hard reset by holding down the power button and tried it again, which gave me the same thing. Again, hard reset. This still commonly happens, along with my CMOS date/time settings apparently being wiped after such reset. Sometimes the cursor appears, but mostly it doesn't.
Usually after trying enough times it'll pull through or by starting it after selecting a recovery option from F8. "Enable low resolution video" I know worked before, but it didn't give me low res display. (Not that I'm complaining) It could likely be because I installed over the preview, and in-place installations typically have issues. I'm also running a program to provide titlebars with aero styled glass transparency, and my graphics driver is up to date.
When I put my laptop to sleep and then attempt to wake it up, it will power on (going through the boot up screens) instead of just waking up, thus causing me to lose any information open on the computer.
I have tried a few things to try to wake it up to no avail:
sfc /scannow in cmd
unplug all usb devices before going to sleep/waking up
rollback graphics drivers
resetting power plan settings and power button settings back to default state
Is there some memory dump file to fix this?
Asus UX305F laptop I bought last week. It's working fine apart from a couple of things:
- When the battery is getting low, say from 10% and down, the performance drops dramatically and everything, particularly the internet, runs so slow that it's almost impossible to use until I reconnect the charger. I've changed the on-battery power settings to match the performance settings when it's plugged in and it hasn't made any difference.
- When I'm using the laptop in my bedroom which is adjacent to the living room where the WIFI signal is coming from, the connection is extremely slow, much slower than my mobile phone for example. In the living room I average about 50mbps whereas in the bedroom I'd be lucky to get 20mbps though my phone can get about 40mbps in the same room.
I'm a huge fan of the Windows 10, I love it, however recently I've gotten my first glimpse of the buggy side. The computer (pretty decent) is taking a very very long time to shut down. I just let it be, maybe update or something, however it kept doing it. After a few days I checked the event viewer, and I had quite a few of errors.
The main error (that I think, I'm no computer expert) that is causing this domino effect is a distributed error, CLSID and APPID. I've tried many solutions out there, and none seem to work.
Have run 4 times SFC and keeps finding errors.
Upgraded from win 7 Pro x64 to Win 10 Pro 10 days ago,, first week startup was perfect, then something happened, an upgrade or external program, don't know.
Have read in other forums to run DSIM.exe and found some errors, but didn't know what to do..
DISM.exe /Online /Cleanup-image /Scanhealth
Dism.exe /Online /Cleanup-Image /CheckHealth
DISM.exe /Online /Cleanup-image /Restorehealth
Dism.exe /Online /Cleanup-Image /startComponentCleanup
I'm attaching SFC log
FastStartup and hibernate on option are checked since the beginning
Normally when i use the net all is fine. Noticed today when i run a video convertor programme in the background the loading of web pages is extremely slow. Stop Freemake video convertor and page loading is normal speed. I assumed it was memory, did memtest and no errors found. CPU monitor sits on 100%. Had similar problem with Villisoft last week. Time for a new CPU methinks but having said that would 100% cpu usage slow down webpage loading to that degree.
View 5 RepliesI have an HP Envy i7 laptop which came with a 1TB hard drive. As there was space to add a second drive I added a 500GB drive. In addition I added a 320GB drive in the DVD slot (using a dvd/disc converter cartridge).
I have recently noticed that disc access in Explorer has become really slow (seems to think about it for 10 - 15 secs sometimes) and loading programs seems to take longer too.
After upgrading from windows 8.1 to windows 10,when i shut down and boot my laptop windows startup pretty fast 8 sec and The login screen appears.However when i restart windows the bot went well it start to be slow in the loading screen with windows logo 10 sec after that a black screen( if i click or move the mouse the cursor appears) 10-15 sec , after that an other clear blue loading screen with a loading circle in the middle, after that the login screen also take a while to login and desktop too take a while to show properly all the icons and task bar.
View 9 RepliesWe are having some performance issues at starting up laptops outside our domain. When we logging at the office booting proces takes about 10 -20 seconden. (with networkshares etc)
When outside the office so at home when we are logging in it takes about 1 minute to logging on. I have also tried it without business network shares, but that doenst solve the problem. It looks like we cant reach the domain controllers (of course) but is there a way to speed this up?
Specs:
Dell I5
8 - 16 GB memory
500 GB / 1 TB SSD
WIndows 10 pro
I recently installed a SSD and clean installed Windows 10 and just a few applications such as Office 2010 and Kaspersky Internet Security 2016.
A cold boot to the login screen takes 15s (fast start up disabled). I have one Microsoft account and two local user accounts. Logging into these takes 3-6s from entering the password.
On occasions, the login can take about 25s and you just see the spinning wheel until the desktop appears. There are no obvious associated errors in the Event Log.
windows 10 professional
This is **NOT** a boot issue, the system boots up just fine and gets to the login screen fast. The issue is the system startup after login, it is takes a rather long time for Windows to become usable. I have tried stopping all NON windows services in msconfig, but this made barely any difference. Even after the system seems to have finished the startup, once I open the browser it then takes ages until it loads the first web page. If I run task manager there is nothing that is hogging the cpu or memory or disk.
I have defragged the disk, although I had to use a 3rd party tool to do this as Windows defrag refuses to do it because it thinks it is an SSD disk due to the 32GB SSD cache.
I've clean installed windows, reinstalled all my drivers, and reset the bios but my computer is still performing slow. I went from a MSI FM2-A75MA-E35 motherboard to a MSI A55M-E35 one and from Corsair Vengeance 8 GB (2 x 4 GB) CMZ8GX3M2A1600C9 to Crucial Ballistix Sport 8GB (1 x 8 GB) BLS8G3D1609DS1S00. I don't believe there should have been much of a performance change because of the hardware so I'm thinking I probably did something wrong.
View 1 RepliesI've upgraded my laptop from W8.1Pro to W10Pro. At first everything was fine, but now the boot is very slow with the icons taking ages to appear on the desktop and the taskbar. I've removed almost all the automatic start up items, defragged and reinstalled the graphics driver.
View 2 RepliesAfter installing windows 10, most of the time when I boot after the windows logo with circles below it the signal to display stops, if I press reset then the computer boots but the startup is very slow. With windows 8 from pressing the power button I would get to desktop in 8 secs, here it takes at least 30 secs or more. I would like to know the if problem is with windows 10 or Nvidia drivers.
I have Nvidia's 650 Ti boost card.
It starts at around 300MB/s but after a second it drops to 20MB/s. On Windows 7 it was usually around 100MB/s. This is for transferring to second hard drive. It's even slower transferring to USB drive, about 2 MB/s.
View 9 RepliesOk so since upgrading from 7 to 10 file explorer has been a absolute nightmare! Everything was either incredibly slow, didn't happen or only partially load. After enduring this to this day I have decided enough is enough and started diagnosing by limiting the startup services using MSconfig.
After going through enabling startup services groups at the time and restarting the computer everytime! Eventually I found the service that was causing the problems with file explorer. The service is called Windows search and once disabled it restored functionality to file explorer. The search function in file explorer works but the search in the taskbar doesn't.
Step by step guide:
1. Hold Win+r to open run
2. Type msconfig and hit ok or enter
3. Click Services
4. Navigate to Windows search (you can sort the list in descending alphabetical order)
5. Uncheck tickbox
6. Click apply then ok
7. Select to restart now
I have a powerful laptop with Windows 10 Pro installed :
CPU : i7-4712HQ @2.3GhzRAM : 16 GBVideo : Nvidia GeForce GT 750M
When I switch between virtual desktops the animations are pretty laggy, which it's kinda weird, because on my Surface 3 Pro which is a low weaker than this laptop the animations are very smooth.
PS : Animation is not so slow, but it has some lag. I also have in the Intel and Nvidia Graphics all set up to high performance.
Even after I got my new SSD it spedup everything but when bringing up the Download folder it super slow at adding up all the file details and icons. It's weird because this only happens in this folder while browsing in file explorer. Even my picture folder loads faster.
View 2 RepliesI've been having this problem for a long time, I've tried resetting my pc to factory settings, didn't work. I tried windows trouble-shooter, didn't work. When I boot I am greeted with a zoostorm logo for about 50 seconds followed by a black screen for 1 minute, and then a windows screen for about 30 seconds. Booting takes about 2-3 mins and even when I'm finally in, my programs load extremely slow and I can only open chrome after a minute otherwise it lags. Remember I have reset my pc so nothing runs on startup apart from steam.
I have a gtx 970 and the latest drivers for it. Also I get 100% disk usage when performing certain tasks. my cpu,gpu and memory never go to such percentage and if they do its because I'm running a very cpu,gpu or ram intensive game. I have not changed anything in my bios since I got my pc and have never done anything to the disk drive (all I know is my HDD is 3tb and has a speed of around 120mb/s) The only thing I have changed on my pc since I got it was an upgrade to windows 10 from 8.1, gtx 970 from a 750ti and a 750w power supply by corsair.
I do not know if this problem happened when I had windows 8.1 but even if windows 10 is the problem there must be a way to fix it as I despise using windows 8.1 anymore. Another thing to note is that loading times for games take a little longer than my friends and my pc is slow at downloading games, my disk usage when installing games is usually 13mb/s and I get 100% disk usage from using 13mb/s. As you can see by this screen shot steam is downloading fallout 4 and 14mb/s of my disk are being used and everything else barely reaches 1mb/s
No matter which video player I use, nor which video format I am trying to play, the file hangs sometimes for several minutes before finally playing. Sometimes I have to manually close the program and start it again because it just takes too long. This seems to be happening with all video formats, all players. Got me stumped and it is very annoying. These are files stored on my hard drive, but it is also happening with streaming live video from the internet. I usually have to stay connected to the video site for several minutes before it starts to play.
View 3 RepliesI've really had it with Windows 10 now. The latest upgrade made my computer slow to a crawl, and disabled my ability to change the features on my Logitech mouse. The mouse now moves 1:1, so that I must move it 18" to get from one side of the screen to the other. The Logitech website claims the mouse is for Windows 7, not 10, so I must buy a new mouse? It worked fine before this last upgrade.
I would really like to go back to Windows 7, but my restore disks don't seem to work. Perhaps buying Windows 7 disks has become worth it.
Microsoft has shown their incompetence with their latest upgrade. We used to run a program to optimize compiled code to make it faster. That concept must be unknown to Microsoft.
My new Asus Win10 machine with a solid-state hard drive wakes up from sleep refreshingly quickly -- just a couple of seconds. But it takes between 15 and 40 seconds before the Internet connection is re-established. Once the connection is re-established, it works fine. But that delay is annoying. Can I do something to speed up the re-connection?
I don't know where the delay is coming from. My NIC is plugged directly into my Comcast cable modem -- no other routers or the like involved. The NIC on the machine claims to be an "Intel Ethernet Connection (2) 1219-V", running driver version 12.13.17.4, which is claimed to be the current version. The "Power Management" tab in Device Manager for the NIC lists three power-saver options, all of which are enabled (that is, the boxes are checked):
Respond to ARP requests without waking system
Respond to NS requests without waking system
Energy Efficient Ethernet
(I am attaching a PNG of the Power Management tab.) These options suggest that the NIC should be able to keep the Internet connection alive, even during sleep. So I don't know why I am experiencing a delay in re-establishing the connection.
I just switched to a new motherboard, its an ASRock H97M-ITX/ac. Before I turned off my pc with the old motherboard I uninstalled some devices like the IDE controllers, network adapters, and sound. Then I installed the new motherboard, turned on the pc and noticed right away it was very slow but after a few restarts and installing the new motherboard's drivers it was somewhat faster but I could tell that it still wasnt right. I ran a benchmark on my ssd and got what I think is a really bad result:
Sequential Read (Q= 32,T= 1) : 19.763 MB/s
Sequential Write (Q= 32,T= 1) : 12.059 MB/s
Random Read 4KiB (Q= 32,T= 1) : 6.253 MB/s [ 1526.6 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 5.544 MB/s [ 1353.5 IOPS]
Sequential Read (T= 1) : 17.194 MB/s
Sequential Write (T= 1) : 11.953 MB/s
Random Read 4KiB (Q= 1,T= 1) : 2.197 MB/s [ 536.4 IOPS]
Random Write 4KiB (Q= 1,T= 1) : 3.296 MB/s [ 804.7 IOPS]
I'm pretty sure this is terrible for a SSD. So I guess I did something wrong. I'm prepared to reinstall Windows, but thought I'd check in here first because it would save some time if I could just fix my current Windows installation. Obviously a clean install would be best but the time involved in getting everything set up again!