Performance :: PC Wakes From Hibernation With Mouse And Keyboard
Dec 12, 2015
I have successfully activated hibernate mode (S4), yet whenever the PC is hibernated a shake of the mouse or the press of any key on the keyboard just wakes and turns on the PC. Needless to say I do not want this to happen. Hibernate (S4) works as confirmed by the fact that when it's waken up, the PC goes through the POST phase of the boot before loading W10. In addition a powercfg /a gives the following output
Code:
C:WINDOWSsystem32>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast Startup
Sleep (S3) works too. Although it seems to have the same effects on the hardware (turns off the CPU fan), the waking up it's much quicker, without POST. In addition, here's the log from Windows event viewer:
Code:
Log Name: SystemSource: Microsoft-Windows-Kernel-PowerDate: 12/12/2015 16:40:19Event ID: 42Task Category: (64)Level: InformationKeywords: (4)User: N/AComputer: DESKTOP-9NITH1LDescription:The system is entering sleep.Sleep Reason: Application API
[code]...
In the UEFI BIOS all the ACPI settings are in order, as shown in this photo. Bios is updated to the latest version.
View image: WP 20151201 11 43 34 ProEnabling/Disabling Fast-boot and/or fast start-up changes nothingI tried also a different USB wireless mouse, but no changes. With a PS/2 mouse the PC does not wake up from hibernation.Switching the Logitech Unifying receiver between USB 2 and 3 makes no difference.The same mouse and keyboard do not turn on the PC after a complete shut down.
View 1 Replies
Similar Messages:
Sep 9, 2015
i don't want my mouse or touch-pad to wake my laptop from sleep when it gets triggered, I have been to 'mouse settings' & unchecked the part about waking up PC' & i hit apply & OK but no good. Now the touch-pad wont wake it up but my bluetooth mouse still does it. I'm at a lost as to what other settings i missed or if its a bug somewhere.
View 3 Replies
Aug 7, 2015
I use left handed mouse, and swapping left / buttons works OK. I also set the wheel button to be "double click". But the wheel button brings up the context menu instead of double click. If I change to right hand mouse, the wheel button gives double click as expected. how to make the wheel button give double click for left hand mouse?
View 5 Replies
Dec 21, 2015
Okay, so I take blame for accidentally messing up my Windows 10. My NVIDIA graphics card wasn't working and wasn't letting me install my drivers. Well that aside, now that I installed older Drivers Windows 10 registers something horribly wrong. It wants to do a system repair. Okay, good, fine with me. But then when it gets to the page for me to select a keyboard layout, I have no mouse and my keyboard doesn't work either.
Anytime I press a button on them their backlights turn on, but then turn back off when I don't do anything with them.
I can't afford to get a new OS, I have no DVD Drive so I definitely can't do anything that requires a disk. What do I do?
View 6 Replies
Oct 22, 2015
Let me preface this by saying that I'm an average user. I surf the internet, create documents, and basic things like that. I can attempt troubleshooting by following tutorials/instructions.
I recently upgraded my desktop & laptop to Windows 10. The desktop wakes itself from sleep most of the time since upgrading. This wasn't an issue in Windows 7. The laptop has not displayed this issue to the best of my knowledge.
So far I unchecked the "Allow this device to wake the computer" option in Device Manager--> Network adapters--> Realtek PCIe GBE Family Controller--> Properties--> Power Management. I saw that tip somewhere on the net.
View 7 Replies
Aug 20, 2015
Post W10 Installation - my computer constantly wakes up from sleep. It just will not stay asleep no matter what, I thought it was my mouse so I went into my device manager and changed it so it didn't have the ability to wake up my computer. It stopped for a little while at least that's what it seemed, must have been coincidence because now its happening again. Which is weird because I went into power settings and turned "Wake Timers" off completely, it's now switched to disabled. Yet whenever I runcmd and type "powercfg -waketimers" as it reccomended here [URL] .... to find out which timers are on.
It says something about volume 2 on one of my hdd's, some stuff that doesn't make much sense to me. If you need me to paste the cmd info you're going to have to tell me how. Also when i type "powercfg -devicequery wake_armed" it lists "HID Keyboard Device" and "HID Keyboard Device (001)." Maybe the latter is what's waking my computer? I figured that was just another name for my keyboard or something, all I want is my computer to stay asleep and only my corsair keyboard to be able to wake it up.
Also everytime it wakes up I type "powercfg -lastwake" into the cmd and it doesn't give me any info. It says "wake history count -1" and the other 2 stats are 0, followed by no text or information. Also I forgot to mention but when it wakes up as of now, the display will actually stay off but the computers lights and everything are on. Whereas before when I thought it was the mouse waking it up, the whole computer would turn back on, display and all.
View 9 Replies
Nov 21, 2015
My new Asus Win10 machine with a solid-state hard drive wakes up from sleep refreshingly quickly -- just a couple of seconds. But it takes between 15 and 40 seconds before the Internet connection is re-established. Once the connection is re-established, it works fine. But that delay is annoying. Can I do something to speed up the re-connection?
I don't know where the delay is coming from. My NIC is plugged directly into my Comcast cable modem -- no other routers or the like involved. The NIC on the machine claims to be an "Intel Ethernet Connection (2) 1219-V", running driver version 12.13.17.4, which is claimed to be the current version. The "Power Management" tab in Device Manager for the NIC lists three power-saver options, all of which are enabled (that is, the boxes are checked):
Respond to ARP requests without waking system
Respond to NS requests without waking system
Energy Efficient Ethernet
(I am attaching a PNG of the Power Management tab.) These options suggest that the NIC should be able to keep the Internet connection alive, even during sleep. So I don't know why I am experiencing a delay in re-establishing the connection.
View 1 Replies
Aug 4, 2015
I updated my laptop (No touch screen) from win 7 to win 10 ....... my mouse and keyboard is not working
View 1 Replies
Aug 30, 2015
I have installed windows 10 and it was working great and then I turned on my pc and when it gets to the screen after the blue windows logo where one would normally login my keyboard and mouse will not work. I've tried them on every USB port I have and nothing works.
View 4 Replies
Aug 11, 2015
I have a Dell XPS 17 laptop. Worked great under Windows 7. Tried Windows 10 but was unable to get the wireless LAN driver to work, so I went back to Win 7 via the official "Go Back to Windows 7" option in Windows 10 - now the keyboard and mouse won't respond after start up. They work fine in the bios, but are completely unresponsive on the login screen - even when I boot in safe mode. No USB ports work, so I can't try another keyboard/mouse. Was going to reinstall but I'll lose the existing data. Now I'm going to have to pull the drive and copy over manually, then reinstall. Last thing I was going to try was disabling EVERYTHING in the BIOS just in case there was some kind of weird IRQ conflict, etc.
View 1 Replies
Aug 28, 2015
Whenever my laptop goes to sleep, the only way to wake it up is through the laptop's keyboard (pressing any key on the keyboard). But when I press the USB keyboard or the USB mouse, it doesn't wake up.I use my laptop mostly as a "desktop": I connect it through an HDMI cable to a larger 24" monitor, and the laptop is lying closed in the corner. It is just annoying to open the laptop and press the keyboard.. not a big deal, but if it's possible to change that it will be good !
View 6 Replies
Sep 13, 2015
So my computer started running a bit slower then it should be, at the point where my computer to open would take half a min, so i did fresh install. So i left installation overnight, i wake up in the morning and it say "Hi there" installation menu where you choose Country, language, keyboard layout and timezone, but it's totally froze, i can not see mouse cursor or use my keyboard, if my monitor goes to sleep i can't turn it on back. I did read that it's problem with drivers not installed. I've tried restarting pc few times. Is it true that problem is with drivers not installed correctly or at all?
View 1 Replies
Dec 10, 2015
I recently re-installed Windows 10 on my Asus X205TA notebook using the ISO on a USB stick.It installed without a problem, but when I boot the computer now (first boot after installation), the OS does not recognise the keyboard and the mouse, so I cannot enter the required data to proceed to the next screen..
Seems like the required drivers are missing, and I am thinking a re-install may be necessary, but how to get the keyboard and mouse drivers included (inserted?) in the installation process?
View 1 Replies
Jan 12, 2016
turned my computer on yesterday and it loaded up fine, apart from there was no cursor and my keyboard wouldn't work. I have a R.A.T. 5 mouse and a Coolermaster QuickFire keyboard. I know that they're on and working because their LED's are on. I decided to plug in my old ps2 keyboard and restart my PC to enter BIOS. I checked and it recognises that the keyboard and the mouse are connected into the USB hub and says they're working. Another thing, even my ps2 keyboard doesn't work when my computer gets past the start screen!
View 1 Replies
Dec 5, 2015
I just went from Windows 7 to 10 and now my USB keyboard and mouse are unresponsive.
View 5 Replies
Nov 2, 2015
My PC was working fine until today. Now when I boot up the lights on my razor keyboard illuminate but when it gets past the bios the lights turn off.
When the login screen for w10 comes up I can't login because both the keyboard and mouse are not responding.
They work fine in the bios. I am using a custom built PC (a88x-gamer MOBO) and a corsair m65 mouse with a razer black window 2015 keyboard and running Windows 10.
View 1 Replies
Jul 30, 2015
After I installed Windows 10 from windows 7 I couldn't use my mouse and keyboard it works when I boot up BIOS Utility but when im on windows 10 it does not work. I tried switching usb ports and that didn't work either.
View 9 Replies
Oct 25, 2015
Yesterday I downloaded and had a fresh installation of windows 10 (means I have no backup of my previous windows 7). Now since installation, whenever my PC goes to sleep I fail to wake it up by pressing any key on the keyboard or touchpad.
I've tried to find the power management in keyboard settings from the device manager but I failed to find any option there.
Device: HP Probook 450 G2
Screenshot of Keyboard Properties:
View 2 Replies
Dec 14, 2015
I've had a series of problems with Windows 10. Latest (last couple of weeks) Thunderbird and all browers have been gradually getting worse and worse. I decided to restore the system this morning but I get stopped every time by a screen where I am to select a keyboard to use. This is where both the mouse and keyboard don't work.
View 4 Replies
Mar 8, 2016
My mouse and keyboard don't work. I just want to play counter strike...
View 1 Replies
Aug 31, 2015
I recently tried windows 10... didnt like it. Did the recall back to windows 7 option. Let it do its thing. Came back and my computer was trying to rapair itself... said could not reboot windows is checking for a solution.. I let it go.. it said no solution found. And just turned off..So I restarted spammed f8. Tried to start in safemode.
Got to password screen and mouse and keyboard won't work...So I restart, spam f8 again. I select repair windows this time, cancel the repair process then clicm.advanced options. Try to look at restore points... and it says none exist... that is bs. I did restore points twice a week. when. I try to start normally it loads her goes to a blue screen with tons of writing and letters and errorrs but no time to read any...
View 1 Replies
Sep 23, 2015
My computer just won't sleep for longer than 15 minutes, I've disabled wake-timer in the advanced power options. I also disabled my keyboard, mouse, network, adapter, and everything else in my device manager that could possibly be waking my computer up without me wanting to do so. I also checked my cmd logs for devices armed to turn my PC on.Checked the Event Viewer aswell but in the log it says whatever keeps turning my PC on is 'Unknown'.
View 1 Replies
Oct 31, 2015
I had to reinstall from scratch Windows 10 Enterprise 32-bit on my Dell Venue 8 Pro 32 GB tablet. After the first installation, the Bluetooth keyboard and mouse (both work fine under Windows 8.1), disconnected after 10-12 seconds. However, probably after one of the automatic updates, they started working normally (it took about a day or so).
Now, after the 2nd Windows 10 installation, the problem with Bluetooth keyboard and mouse reappeared. I forced the Windows updates, but no luck.
It's curious because, if I keep the Settings window active, on the Bluetooth page, both the keyboard and the mouse work. If I minimize the Settings window, after about 30 seconds, both devices stop working. If I close the Settings window, or move to a different settings page, both devices stop working immediately.
I have changed the Bluetooth Support Service from Manual to Automatic, but it did not work. Running the Hardware and Devices Troubleshooter did not work either.
View 1 Replies
Aug 15, 2015
I'm guessing it doesn't recognize the 10 drvers. And without the keyboard I can't log in because I have a password. Keyboard does work in bios though but not in safe mode.I really don't want reinstall and lose all my data
View 1 Replies
Aug 21, 2015
My mouse and keyboard (both are USB) don't work, but they are lit up. I tried replugging them, but that doesn't work. I tried using F8, but that doesn't work. I also don't have a PS/2 port, as I am running BootCamp on a Mac. I even tried using the Apple Keyboard.
Before this problem, I had issues with BAD_POOL_HEADER (BSoD) on Windows 10 after updating drivers. Checking if I had any system restores, it didn't have any that I made before the update. So, I reset my computer, with all files intact. Then my problem arises; keyboard and mouse do not work, and I'm pretty much stuck on the login screen.
View 1 Replies
Oct 21, 2015
i just formatted my pc. I got the following screen; URL... My mouse and keyboard are not working eventhough there is a light burning in my mouse
View 1 Replies
